Browse > Article

A Study on Improvement of the Stick-slip Induced an Effect Decrease of the Table Weight  

홍성오 (화천기공(주) 기술개발연구소)
조규재 (조선대 기계공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.11, no.5, 2002 , pp. 7-14 More about this Journal
Abstract
In order to achieve high precision machine tools, the research for performance enhancement of feed drive systems is required. Development of the high speed feed drive system has been a major issue for the past few decades in machine tool indestries. Because table levitation system decrease the table weight, an effect of reaction by weight is minimized and lost motion can be removed at maximum. In case fled system is designed with drive motor, ball screw and support bearing load capacity selection, an effect of decrease of the table weight exist. So, the table weight through an effect of decrease call it into the realization of cost down. Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper table levitation system has been developed for the stick-slip in a fled drive systems.
Keywords
Machine Tools; Feed Drive Systems; Yaw Error;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 An Investigation of Stick-slip on the Contouring Accuracy of CNC Machine Tools /
[ Y. S. Taring;H. E. Cheng ] / Int. J. Mach. Tools Manufact   DOI   ScienceOn
2 CNC 선반에서 볼나사 열변형에 따른 위치결정 정도 개선에 관한 연구 /
[ 홍성오;조규재;김재열 ] / 한국공작기계학회지   과학기술학회마을
3 Modeling and Analysis of Nonlinear Guideways for Double-Ball Bar (DBB) Measurement and Diagnosis /
[ W. H. Chieng;J. M. Lai;J. S. Liao ] / Int. J. Mach. Tools Manufact   DOI   ScienceOn
4 Design, Fabrication and Performance of a Ferrocement Machine Tool Bed /
[ M. Rahman;M. A. Mansur;W. D. Ambros(et al.) ] / Int. J. Mach. Tools Manufact   DOI   ScienceOn
5 Computer-aided Accuracy Enhancement for Multi-axis CNC Machine Tool /
[ J. S. Chen ] / Int. J. Mach. Tools Manufact   DOI   ScienceOn
6 Active Thermal Preload Regulation for Machine Tool Spindles with Rolling Element Bearings /
[ J. F. Tu;J. L. Stein ] / Journal of Manufacturing Science and Engineering   DOI   ScienceOn
7 A Study of Backlash on the Motion Accuracy of CNC Lathes /
[ J. Y. Kao;Z. M. Yeh;Y. S. Taring(et al.) ] / Int. J. Mach. Tools Manufact   DOI   ScienceOn
8 고정밀 가공 및 측정기술에 관한 연구 /
[ 연세대학교 ] / 통산산업부 과학기술처, 3차년도 연차보고서