• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.172-175
• /
• 2000

The crimping connection is a permanent connection that maintains mechanical and electrical property for a long time by crimping two conductors. In this paper, we have done a basic study to decide normal or abnormal condition depending on crimping. Using PZT piezo-sensor, we have analyzed crimping waveforms according to the crimping height. And hence the normal or abnormal condition of crimping connections in real time could be decided by comparison of crimping waveforms in the cases of normal crimping, over crimping, under crimping and core omitting.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.385-390
• /
• 2004

In this paper, electronics ballast using double resonant inverter for 250[W] MHD lamp is designed and implemented. Electronics ballast reduce a turn -on/offf loss by using ZVS(Zero Voltage Switching) technic in the double resonant inverter, and when circuit have a analysis, the characteristic evaluations is described generally by using the normalized parameters used numerical analysis. We conform a rightfulness of theoretical analysis by comparing theoretical waveforms and Pspice waveforms and experimental waveforms, double resonant inverter for 250[W] MHD lamp is operated safely.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.113-119
• /
• 2006

This paper studies the torque characteristics of CDTP controlled BLDCM with various back-EMF waveforms. We propose a CDTP method to suppress torque pulsation due to commutation time and point. It is adopted to control the BLDCM with real back-EMF waveforms through the Hague's method for minimizing torque ripple. Real back-EMF waveforms are produced with a magnetic fringing factor and crest width of back-EMF. The performance and characteristics of the proposed control method are analyzed by simulation and verified through experimental results.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.230-234
• /
• 1997

The matching pursuit (MP) algorithm developed by S. Mallat and Z. Zhang is applied to magnetic resonance (MR) imaging. Since matching pursuit is a greedy algorithm to find waveforms which are the best match for an object-signal, the signal can be decomposed with a few iterations. In this paper, we propose an application of the MP algorithm to the MR imaging to reduce imaging time. Inner products of residual signals and selected waveforms in the MP algorithm are derived from the MR signals by excitation of RF pulses which are fourier transforms of selected waveforms. Results from computer simulations demonstrate that the imaging time is reduced by using the MP algorithm and further a progressive reconstruction can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1237-1240
• /
• 2005

The effects of various sustain waveforms on the discharge characteristics, such as discharge current waveform, IR waveform, luminance, luminous efficiency, power consumption, and static margin are investigated under high Xe (20%) gas mixture at 200 kHz. The four types of sustain waveforms, such as non-overlapped sustain waveform without auxiliary pulse, non-overlapped sustain waveform with auxiliary pulse, overlapped sustain waveform without auxiliary pulse, overlapped sustain waveform with auxiliary pulse, are examined intensively. As a result, the overlapped sustain waveform with auxiliary pulse shows the best discharge characteristics under high Xe (20%) gas mixture at 200 kHz.

• 전기의세계
• /
• v.24 no.1
• /
• pp.43-53
• /
• 1975

This paper describes a converter, which combines SCR bridge type rectifier circuit with a rotating distributor. This type of converter produces an adjustable low frequency output of three phase or single phase, from three phase or single phase power source. Output-waveforms of this converter are multi-pulse in three phase output, and square wave in single phase output. Problems about the operation of static switches, a commutation and output-waveforms are investigated, and experimental results verify that frequency can be adjusted satisfactorily from zero to 20 (Hz) and the expected output-waveforms are obtained without sparking on the distributor under various loading conditions. This converter can be utilized to low speed control of A.C. motors, and other lowfrequency loads.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.709-712
• /
• 1987

In this paper, a mathematical model for the purpose of QRS detection is considered in the case of the occurrence of nonoverlapping pulse-shaped waveforms corrupted with white noise. The number of waveforms, the arrival times, amplitudes, and widths of QRS complexes are regarded as random variables. The joint MAP estimation of all the unknown quantities consists of linear filtering followed by an optimization procedure. Because of time-consuming, the optimization procedure is modified so that a threshold test is obtained. The model formulation with nonoverlapping waveforms leads to a standard procedure covering a segment before as well as after an accepted event. Adaptivity of the detector is gained by utilizing past signal properties in determining threshold for QRS detection.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.333-337
• /
• 2008

This study investigates crack propagation behavior of Sn-3.0Ag-0.5Cu solder under pull-push loading conditions. Fatigue Crack Growth (FCG) tests were conducted on Center Cracked Plate (CCP) specimens in fast-fast (pp) strain waveform. The fast-slow (pc), slow-fast (cp) and slow-slow (cc) strain waveforms were also used to study the effect of strain rates. The crack propagation rates for the four strain waveforms were correlated with J-integral range and a scatter band of factor 4 was found. The crack growth rates for the pc waveform was highest, followed by cp, cc and then pp waveforms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.529-534
• /
• 1988

This paper describes a new method to eliminate some selected harmonics in PWM waveforms using the Walsh series which substitute the linear algebraic equations for the nonlinear equations required in the Fourier series harmonic elimination. In addition, this method is simulated to synthesize periodic PWM waveforms and compare the Walsh analysis with the FOurier analysis, Experimental results are shown that a singel-phase PWM waveforms are identified with the proposed Walsh Series.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.67-69
• /
• 1989

In this paper, principles of Rhcoencephalography(RBG) was described and RBG was designed and developed. Using the developed instrument, RBG waveforms of the left and right brain, RBG waveform changes by posture, were observed. It was found that RBG waveforms could be observed noninvasively. RBG can be easily applied for testing the effect of various drugs related to CBF(Cerebral blood flow) since it is quite sensitive to the relative changes of CBF. Various cerebral diseases can be diagnosed by analyzing the RBG waveforms. The area of restricted cerebral blood vessels can be located by arranging the appropriate electrode configuration.