• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.111-118
• /
• 2004

The need for this study must be considerable. as being activate of green roofs research that the organization and construction obtain access to more development technologies. Nevertheless, the green roofs system has begun to apply since 1980's, the green roofs technology was restricted to develop without verification of technologies such as a load or water leakage. There is a limit as urethane waterproofing to almost domestic waterproofing materials and methods of construction for general green roofs. The introduction of materials and methods of construction which are appropriated to property of green roofs could be a decisive factor in a long-range durability and economical maintenance cost, moreover, it support to variety construction system and organization. This present paper describes a necessity of waterproofing and root barrier system is one of the sub-organization based on green roofs construction. which have enormously large impact on the durability.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.163-169
• /
• 2014

Engineers in the construction field have been using bonded waterproofing sheets in an attempt to resolve the imbalance in the quality, the risk of fire, safety of workers, and environmental pollution, as well as to eliminate separate use of organic adhesives on the surface of concrete. Recently, self-laminated waterproofing sheets have been developed. The purpose of this research is to find an appropriate processing speed according to the changes in physical properties, and visual observation of the waterproofing sheets laminated by the aluminum thin-film and viscosity layer that can be attached through self-adhesiveness on the surface of concrete and waterproofing sheets. Therefore, this research is conducted using a physical performance test. Based on the result of the test, when the high-frequency inductive heating apparatus was used, an improved adhesion and bonding stability effect were confirmed after the anti-hydrostatic pressure and bond strength in the temperature condition, and the surface observation in the processing speed condition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.41-49
• /
• 2021

시멘트 혼입 폴리머계 방수재는 일반적으로 현장에서 배합하여 도포 형태로 사용되는 경우로 시공 시 발생되는 기포, 요철로 인한 불균일한 도막두께 등에 대한 시공능력을 보완해야 할 필요가 있다. 본 연구의 최종 목적은 폴리머 방수재의 현장 적용 시 시공방법을 도장·도포하는 단일공정에 그치지 않고 시트를 부착하는 공정을 추가하여 이에 대한 성능을 검토하는 것이다. 이에 대하여 재료, 환경, 제작방법 등을 검토하여 적용성을 평가하였다.

• 대한건축학회논문집:구조계
• /
• 제34권12호
• /
• pp.41-49
• /
• 2018

The current housing performance rating system displays the performance rating of the houses supplied by the housing construction company, approved by the Housing Law. This system is intended to provide accurate information to the consumers in the announcement of the tenant recruitment, thereby improving the quality of the housing. This system was revised in January 2005 and implemented from January 2006. It is obligatory for companies with a scale of more than 1,000 households (energy performance rating is over 300 households), but there is currently no content on the waterproofing field. Therefore, this study suggests the revision plan proposes the necessity of the inclusion of the performance grade for the waterproofing field which is not currently implemented in the apartment house performance rating system, and to understand how to secure an adequate living environment. As a result, according to survey results, the performance score based on the difficulty of the maintenance method according to future leaks was selected and the revised system was prepared. Based on this, the performance grade for the virtual apartment was evaluated, and the results show that the performance of various grades is presented accordingly.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.699-706
• /
• 2001

Waterproofing materials should be expected to last the life of the structure. An approximate life cycle cost should be to compare different materials based on initial and periodic repair / maintenance costs. Waterproofing applicators like materials that are easy to set up and clean up. The designer should choose a material that can be applied in almost all conditions. Design Professionals should specify independent inspection on critical jobs or in all cases where the budget permits. The basic causes of defection occurred during construction should be minimized.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1085-1090
• /
• 2000

It is socially increasing the need to maintenance of building's durability and management for building's safety. It has happened in waterproofing field, especially in case of water leakage in expansion joint and cracks, lacking basic design for waterproofing. After the completed of construction, there are many troubles something like this. Therefore it need for development to prevent from water leakage, using oakum and urethane in expansion joint and cracks as a method for waterproofing.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.215-216
• /
• 2017

Existing studies highlights the problems about the negative-side waterproofing design of apartment complex underground structures. This study suggests the alternatives for waterproof design construction details of as a solution, and a review on the applicability of this new construction design details through a mock-up construction is provided.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 산업계
• /
• pp.135-141
• /
• 2009

This technology is able to construct with hardening UREPALT adhesives and TPO URE-Sheet simultaneously using automatic equipments. the benefit of this construction method is that The layer of waterproofing is uniform and defect of construction would be reduced because of no construction joints between UREPALT adhesives and TPO URE-Sheet. Furthermore, this new method could accomplish shortening of construction period, quality control and saving of labor costs. Also the non-exposure waterproofing method would be protected from fire and safe for workers without using a torch.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.202-203
• /
• 2015

In light of the recent media outlets revealing structural waterleakage problems, construction workers, design planners and related enterprises are investing more effort towards forming a solution plan for these issues. This study proposes the structuralization of a information network system that allows the selection and discussion of optimal measures for waterproofing related techniques and expert informations online in a realtime setting.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.126-134
• /
• 2012

The purpose of this study is to investigate waterproofing performance of self adhesive sheet combined polymer resin and poly-iso butylene. For the performance estimation of external waterproofing of concrete underground structures, there can be required various properties such as adhesion strength, hair crack resistance, repeat low and high temperature test, and so on. In this study, there engineering properties of composite system using polymer resin and poly-iso butylene were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49mm will be perform.