• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.943-948
• /
• 2012

A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.791-797
• /
• 2017

In this study, we optimized a method of PEO-PPO-PEO block copolymer embedding, for solving non-specific protein and biomolecular adsorption and high hydrophobicic surface property, which is widely known as problems of poly (dimethylsiloxane) (PDMS) that has frequently been used in basic biological and its applied research. We assessed its surface modification by controlling the concentration of embedded block copolymer, water-soaking time, and recovery time as variables by contact angle measurements. In order to evaluate its antifouling ability, adsorption of FITC-BSA molecules was quantified. Furthermore, we generated oil-in-water (O/W) emulsion as a proof-of-concept experiment to confirm that the optimized surface modification works properly.

• Applied Biological Chemistry
• /
• v.46 no.1
• /
• pp.39-45
• /
• 2003

This study was conducted to investigate the effect of ash contents of bread flour on the rheology of frozen dough In making frozen dough by measuring amylograph, flrinograph and extensograph. The quality of frozen-stored dough under freezing condition ($-20^{\circ}C$, 12 weeks) was evaluated by measuring final proof time, moisture content, baking loss, loaf volume and hardness of bread with storage time. In bread flour with high ash content farinogram showed that water absorption, degree of softening increased but valorimeter value decreased. In bread flour with low ash content amylogram showed that gelatinization temperature and maximum viscosity increased and extensogram showed that the area and resistance of the bread flour increased. As the proof time increased the extensibility decreased. Final proof time of frozen dough was shortened at the bread flour with low ash content with storage time. In bread using the flour with high ash content, moisture content, increased but baking loss rate decreased while the hardness of product increased slowly with time. But in bread using the flour with low ash content, the loaf volume of baking increased but the hardness of product decreased. As the frozen storage time was shortened, the product was more stable and better in quality.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.65-71
• /
• 2003

A new type of ultrasonic spray nozzle was fabricated employing a piezoelectric device. The spray nozzle was designed to disperse chemicals in a water treatment mixing tank. The piezoelectric properties in ultrasonic spray nozzles were optimized to improve the dispersion of chemicals. The piezoelectrics were packaged in an aluminum case with silicone resin for the aqueous solution proof packaging. Chemicals were dispersed with high efficiency and the chemicals consumption was reduced by the ultrasonic fine particle spraying. The concentration of Escherichia coli in mixing tank was decreased remarkably using ultrasonic spray nozzle dispersion compared to the conventional methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.598-602
• /
• 2006

Local scour is associate with particular local types of vortex around bridge piers. This paper is method of protection local scour for the existing Busan City subway 3 Line bridge piers and Gupo large bridge piers. In order to take design of protection of local scour this bridge piers, We calculate the local scour hole of depth , scour width, riprap construction , filter construction by formulas. We had experimental hydraulic model test for this bridge piers in order to take proof for the calculation of local scour. We knew that the vortex intensifies the local flow velocities and acts to erode sediment from the scour hole and transport it downstream. As the result of hydraulic model test, we could suggest three types method of protection local scour this bridges. We knew that FHWA HEC-18(Richardson et al. 2001: Modified CSU) Formula is useful to checking calculation as application of field. One is pier protection using the sheet piles and riprap, the others are pier protection using the riprap with filter and to make renew Wall-caisson. The best method of protection for the existing Busan City subway 3 Line bridge piers and Gupo large bridge piers is pier protection using the sheet piles and riprap.

• KCID journal
• /
• v.18 no.2
• /
• pp.43-53
• /
• 2011

In this study, the internal development of the Saemangeum basic concept of the changes being promoted as a lead construction and agricultural land works(54.2 km) has established a numerical model for the scenario. Inner dike to the construction site to reflect the following conditions to reproduce the numerical model by each areas during construction inner dike where scour expected to perform a numerical analysis for the hydraulic review by areas with possible future changes were to predict. Simulation results showed that numerical simulation results for scour expected frequency of 100 years in flood conditions is simulated with 0.02 m/s~l.27 m/s scour velocity for high-impact factor is considered to be stable. Each start point and end point work area of inner dike reviewed and flow rate of 100 years flood, the velocity distribution in the influx of a large flow rate of 0.02 m/s~1.68 m/s occur during construction inner dike are not being evaluated as a special issue does not occur will be considered according to the method and order of construction inner dike stability review suggests that the future need to be made.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.275-282
• /
• 2020

Hranfa's marl, a local natural mineral, is selected for the decontamination by adsorption of aqueous effluents in textile industry. Its physicochemical characterization is first performed. It is composed mainly of Calcite, Quartz, Ankerite and Muscovite. Its specific surface area is 40 ㎡ g^-1. Its adsorption performance is then tested in batch conditions using an industrial organic dye, Bemacid Red E-TL, as a model pollutant. The measured adsorption capacity of Hranfa's marl is 16 mg g^-1 which is comparable to that of other types of natural adsorbents. A hybrid process is tested coupling adsorption of the dye on marl in suspension and microfiltration. An adsorption reactor is inserted into the circulation loop of a microfiltration pilot using ceramic membranes. This makes possible a continuous extraction of the treated water provided that a periodic replacement of the saturated adsorbent is done. The breakthrough curve obtained by analyzing the dye concentration in the permeate is close to the ideal one considering that no dye will cross the membrane as long as the adsorbent load is not saturated. These first experimental data provide proof of concept for such a hybrid process.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1088-1101
• /
• 2011

The purpose of this study was to examine the outdoor sportswear purchase behavior, outdoorwear sportswear brand preference, functional fabric awareness, and benefits sought. The research was performed through in-depth interview during February to March 2011. Data were collected from 10 consumers who had purchased outdoor sportswear and experienced camping in 6 months. First, the results from study showed that functionality/comfortability, design, color, and brand name were important factors in selecting outdoor sportswear. Offline stores were the main place to purchase, however, internet shopping mall and portal online community were another shopping channel as well. Second, respondents preferred imported outdoor sportswear brand to national brand. According to the study, the respondents trusted the imported outdoor sportswear quality based on the brand name, value, and brand history more than national brand. Third, consumers who had low functional fabric awareness were more likely to evaluate apparel products based on the brand name. Knowledge levels for textile functions were high in elastic, UV protection, air permeable, and antibacterial properties. The essential features for camping were water absorbing and quick dry, water resistance, wind proof, UV protection, and fire retardant properties. Finally the results showed that there were two sportswear benefit soughts: functionality and status ostentation.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.257-266
• /
• 2014

This study aims to understand abnormal climate caused by impacts of climate change and to suggest the direction of urban planning focusing on adaptation to climate change. The study consists of theory consideration and case study(Chicago, Philadelphia, Seattle). As a result, the main impacts of climate change faced by urban areas are heat wave, precipitation, and drought. To prevent these impacts, it is important to prepare methods of urban planning as followings: planning for land use, park and green considering the climate patterns, establishing and managing water resources systems similar to the nature, securing renewable energy resources, and transportation facilities and exterior space with proof against climate. It is especially necessary to introduce infrastructures related to storm water, green roof, shading tree planting, green space, and permeable pavement. Finally, in order to realize urban planning for adaptation to climate change, it is needed to make the detailed and specific goal and strategy for the climate change adaptation plan and to extend the scope from the goals to an action plan, a detailed plan, and a design guideline.