• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.183-191
• /
• 2021

A time-series variation of temperature, salinity, and underwater sound speed was analyzed using an Array for Real-time Geostrophic Oceanography (ARGO) float which autonomously collects temperature and salinity for about 10month with 2 days cycle among 12 floats in the center of the Yellow Sea. As a result, the underwater sound channel appeared below the thermocline as the surface sound channel, which is dominant in the winter season, reduced in April. Besides, for a certain time in the spring season, the sound ray reflected the sea surface frequently due to the short-term temperature inversion effect. Based on the case of successful observation of ARGO float in the shallow water, using prolonged monitoring unmanned platform may contribute to predicting sound transmission loss if the temperature inversion and sound channel including background environment focusing are investigated in the center of the Yellow Sea.

• The Korean Journal of Petroleum Geology
• /
• v.12 no.1
• /
• pp.14-19
• /
• 2006

The electromagnetic (light) waves have a limitation to penetrate media, ie, water and sea-bottom layers, due to high energy attenuation, but acoustic (sound) waves play as the good messenger to gather the underwater target information. Therefore, the acoustic methods are applied to almost all of ocean equipments and technology in terms of in-water and sub-bottom surveys. Generally the sound character is controlled by its frequency. In case that the sound source is low frequency, the penetration is high and the resolution is low. On the other hand, its character is reversed at the high frequency. The common character at the both of light and sound is the energy damping according to the travel distance increase.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.257-263
• /
• 2015

Acoustic identification of inner materials in a single-layer cylindrical shell is investigated with acoustic resonance theory. The theoretical resonance peak frequencies for a cylindrical shell are little affected by the density variation, but remarkably changed by the sound speed variation of inner materials. Such acoustic dependency can be utilized to identify inner materials in a cylindrical shell. Acoustic resonance spectrogram for a single-layer cylindrical shell is theoretically plotted as functions of normalized frequency and sound speed of inner materials. The inner materials can be acoustically identified by overlapping acoustic resonance peaks from measured backscattering sound field on the spectrogram. To experimentally confirm this method, backscattering sound field of cylindrical shell filled with water, oil or ethylene glycol was measured in water tank. The inner materials could be identified by acoustic resonance peaks of the backscattering sound field monostatically measured with a transduce of 1.05 MHz center frequency.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.798-803
• /
• 2004

Leak noise is a good source to identify the exact location of a leak point of underground water pipelines. Water leak generates broadband sound from a leak location and this sound propagation due to leak in water pipelines is not a non-dispersive wave any more because of the surrounding pipes and soil. However, the necessity of long-range detection of this leak location makes to identify low-frequency acoustic waves rather than high frequency ones. Acoustic wave propagation coupled with surrounding boundaries including cast iron pipes is theoretically analyzed and the wave velocity was confirmed with experiment. The leak locations were identified both by the acoustic emission (AE) method and the cross-correlation method. In a short-range distance, both the AE method and cross-correlation method are effective to detect leak position. However, the detection for a long-range distance required a lower frequency range accelerometers only because higher frequency waves were attenuated very quickly with the increase of propagation paths. Two algorithms for the cross-correlation function were suggested, and a long-range detection has been achieved at real underground water pipelines longer than 300m.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.787-791
• /
• 2012

Characteristics of particle separation in water using labscale acoustic standing wave were studied. Acoustic standing wave is similar to either sound wave or ultrasonic, which makes a constant wave while returning to the origin by reflector. During that time, particulates dispersed in water are collected on the node of wave, where a sound pressure is zero. Acoustic standing wave transducer as of 28.0 kHz and 1.0 MHz were utilized and $6.8{\mu}m$ kaolin and $100.5{\mu}m$ redmud in average diameter were used as experimental materials in water. Once acoustic standing wave are generated in water, water temperature rises by $0.15{\sim}0.20^{\circ}C/min$ due to a sound pressure. Initial concentration of kaolin and redmud were controlled to have same as of 0.1, 0.2, 0.3, 0.4, 0.5 g/L, respectively. Removal efficiency of the turbidity in a reacting chamber after 5 minutes, when acoustic sound wave was formed in most distinct, was measured to have 18.2~56.2% for kaolin and 23.0~53.6% for redmud at 1.0 MHz. Particle separation was not observed at 28.0 kHz.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.142-146
• /
• 2007

Ambient noise was measured for 3 hours on May, 2001 at a site of 20 m water depth in the Korean coast of the Yellow Sea. During the measurement, the strong underwater sound assuming by marine life was continually observed. The spectrum level of this sound was very high compared to that of underwater ambient noise over the frequency range from 1 to 20 kHz. Therefore, this underwater sound can continually affect the ambient noise level. In this study, the source of the underwater sound was investigated. The snapping shrimp was estimated as reliable source. It was confirmed through comparison with experimental results described in previously literatures. It was also confirmed through analysis of snapping shrimp sound measured under laboratory conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.21-30
• /
• 2018

A passive time-reversal technique can improve error performance of the underwater communication system by reducing influence of inter-symbol interferences, which is caused by a multipath channel response. The passive time-reversal communication system equipped with numerous receivers generally can obtain superior error performance since larger diversity gain can be obtained as the number of available received signal increased. In this paper, we analyze the optimal number and combination of receivers that can approximately achieve the best error performance when using the limited number of receivers. For this analysis, we use communication data collected during SAVEX15 (Shallow-water Acoustic Variability Experiment 2015) carried out in the south-western part of Jeju Island from May 14 to May 28, 2015. Analysis results show that there are depths of energy concentration due to the channel characteristics in which the underwater sound channel are present, and the passive time-reversal technique using the limited number of the receivers can derive near-optimal communication performance if the receivers for time-reversal processing are located at the depths where energy is concentrated.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.94-100
• /
• 2001

In October 1997, low-frequency reverberation was measured at an experimental site off the west coast of the Jeju island using the explosive charge, Signals Underwater Sound (SUS). Received signals were separated into the noise, the reflection, and the scattering region, and then were analyzed for the spectral and statistical characteristics of each region. In the analysis of the spectrum we verified that each region had a unique frequency band and statistical characteristics as well. The results of this analysis showed that the real and imaginary portions were shown to be both normal distributions in each frequency bin. The reverberation envelope had a Rayleigh distribution and the phase had a uniform distribution.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.330-335
• /
• 2008

This research aims to investigate the standards and the performances of domestic and foreign windows for and apartment house and to present fundamental data for selecting the optimum window at the step of designing an apartment house. To compare the performances of domestic and foreign windows it is selected 5 major window companies in and 3 major window companies in Japan, and investigated window structure, material, type of opening and closing, window glass and the performances of windows for an apartment house-closing and opening force, repeated closing and opening, thermal resistance, sound transmission loss, air tightness, water tightness, wind resistance. The result of a comparative analysis show that the average thermal resistance of Korean window is higher than Japan's but the average sound transmission loss and water tightness of Korean window is lower than Japan's and the rest of the performances is similar.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.273-278
• /
• 2003

The effects of content and particle size of sewage sludge slag on the sound absorption was investigated and the physical$.$mechanical properties of porous ceramics for sound absorbent material was studied. The physical$.$mechanical properties of specimens have depended on sintering temperature and slag content without particle size effect of slag. As water glass content increase and particle size of slag decrease at the same slag content, physical$.$mechanical properties of them have been improved. The bulk density and compressive strength of specimens with the batch composition of 77∼89 wt% of slag content and particles with 1∼3 mm, and sintered at 1,050$^{\circ}C$ for 2 h were 1.48∼1.71 and 86∼163 kgf/$\textrm{cm}^2$, respectively. The specimens with 1∼3 mm and <1 mm of particles size showed good sound absorption property at low frequency and high frequency region. With increasing thickness of specimens, sound absorption properties at low frequency region were increased.