• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.252-261
• /
• 2017

본 연구에서는 유정용 강관의 열처리 조건에 따른 미세조직 및 기계적 성질을 조사하였다. 실험에 사용된 유정용 강관의 종류는 J55 강재를 사용 하였고, 열처리 조건은 각각 오스테나이트 처리온도 ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), 냉각방식 (수냉, 유냉), 템퍼링 온도 (미실시, $550^{\circ}C$, $650^{\circ}C$) 이다. 열처리 조건에 따라 얻어지는 미세조직을 예측하기 위해 J55 강재의 화학적 성분을 기준으로 평형상태도와 CCT 곡선을 시뮬레이션 하였으며, 그 결과 A1, A3 온도가 약 $20^{\circ}C$ 감소 하는 결과를 얻을 수 있었다. 냉각속도에 따라 마르텐사이트, 베이나이트, 페라이트등 예상되는 미세조직을 정성적으로 알 수 있었고 이 결과는 실제 실험값과 유사한 양상을 나타내었다. 오스테나이트 처리온도가 증가 함에 따라 구 오스테나이트 결정립이 조대화 되었으며, 특히 $920^{\circ}C$ 이상에서 결정립 크기가 급격히 증가하였다. 따라서 결정립 미세화 효과에 따라 경도와 강도는 감소 하였다. 열처리 조건이 변화함에 따라 마르텐사이트, 베이나이트, 페라이트 등 다양한 조직이 생성되었으며, 이는 경도, 강도 및 연신율에 큰 영향을 미쳤다. 수냉의 경우 마르텐사이트 조직이, 유냉의 경우 베이나이트와 페라이트 조직이 형성되었으며 수냉한 시편이 더 우수한 기계적 성질을 나타내었다. 템퍼링 처리후 마르텐사이트 조직 내에 FeC 석출물이 생성되었고 템퍼링 처리온도가 증가함에 따라 FeC석출물이 조대화되면서 인성이 향상되었다.

• Journal of Photoscience
• /
• 제1권1호
• /
• pp.47-52
• /
• 1994

Effects of HgCl$_2$-treatment on electron transport, chlorophyll a fluorescence and its quenching were studied using isolated barley (Hordeum vulgare L. cv. Albori) chloroplasts. Depending on the concentration of HgCI$_2$, photosynthetic oxygen-evolving activities of photosystem II (PS II) were greatly inhibited, whereas those of photosystem I (PS I) were slightly decreased. The inhibitory effects of HgCl$_2$ on the oxygen-evolving activity was partially restored by the addition of hydroxyamine, suggesting the primary inhibition site by HgCl$_2$2-treatment is close to the oxidizing site of PS tl associated with water-splitting complex. Addition of 50 $\mu$M HgCI$_2$ decreased both photochemical and nonphotochemical quenching of chlorophyll fluorescence. Especially, energy dependent quenching (qE) was completely disappeared by HgCl$_2$-treatment as observed by NH$_4$CI treatment. In the presence of HgCI$_2$, F'o level during illumination was also increased. These results suggest that pH gradient across thylakoid membrane can not be formed in the presence of 0 $\mu$M HgCl$_2$. In addition, antenna pigment composition might be altered by HgCl$_2$-treatment.

• Journal of Photoscience
• /
• 제11권2호
• /
• pp.77-81
• /
• 2004

Deoxygadusol (DO) and structurally related mycosporine-like amino acids, i.e. mycosporine glycine (MO) and mycosporine taurine (MT), were isolated from phytoplankton Prorocentrum micans and studied for the reactivity toward singlet oxygen. These water-soluble compounds with a cyclohexenone chromophore were all shown to be highly effective in quenching singlet oxygen ($^1$ $O_2$), with the efficiencies being significantly larger compared with histidine, a well-known $^1$ $O_2$ quencher. The $^1$ $O_2$ reaction rate constant ( $k_{Q}$) of DG was determined to be 5.4 ${\times}$ 10$^{7}$ $M^{-1}$ $s^{-1}$ by a steady state method based on competitive inhibition of rubrene oxidation. The feasibility of this method was confirmed by estimating the $k_{Q}$ values for MG and two other quenchers, furfuryl alcohol and 1,4-diazabicyclo [2,2,2]octane, and comparing with those values determined by the time-resolved $^1$ $O_2$ decay method in the previous work.ork.

• 멤브레인
• /
• 제28권6호
• /
• pp.395-405
• /
• 2018

본 연구에서 Poly(ethylene-co-vinylalcohol) EVOH 중공사막은 열유도상분리(TIPS)법을 이용하여 제조하였다. 다양한 조건에서 제조된 모든 분리막에서 액-액 상분리에 의해 기공이 서로 연결되어 있는 스폰지 구조가 관찰되었다. 글리세롤과 PEG200은 TIPS 방법에서 희석제로 사용하였고, 냉각조에 글리세롤을 혼합한 냉매를 사용하여 중공사 외표면의 기공을 조절하였다. 또한 혼합냉매의 온도를 높여 큰 기공의 형성을 유도하였다. 본 연구에서는 고분자의 농도, 희석제, 냉각조의 영향에 따른 분리막의 구조, 투과도, 기계적 강도에 대해 실험을 통해 알아보고 상호관계에 대해 심도 있게 연구하였다.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.13-21
• /
• 1992

The inhibitory effects of mercury ions on the growth of barley seedlings were studied and the distribution of metal elements in the organs of treated plants was investigated by using synchrotron radiation induced X-ray emission (SRIXE). Although the treatment of mercury ions caused growth inhibition, the mercury-specific increase in variable fluorescence and the abolishment of energy-dependent quenching in broken barley chloroplasts as shown by Moon et at. (1992) were not observed in the leaves of growth-inhibited seedlings. Instead the treatment of mercury decreased Fmax and Fo values. However, Fmax/Fo ratio and photochemical and nonphotochemical quenching coefficients were not affected significantly. By SRIXE analysis of $10\mu\textrm{m}$ mercury chloride treated seedlings, accumulation of mercury in roots was observed after 1 hour of treatment and similar concentration was sustained for 48 hours. Relative contents of mercury was high in roots and underground nodes where seeds were attachedl but was very low in leaves. Iron and zinc were also distributed mainly in the lower parts of the seedlings. However after 72 hours of treatment the contents of these metals in roots decreased and their distribution became more uniform, which may lead to death of the plants. These results suggest that the observed inhibitory effects on barley seedlings upto 48 hours after the treatment is not due to direct damages in the photosynthetic apparatus, but due to its accumulation in roots and the consequent retardation of the growth of barley seedlings. The decrease in Fmax and Fo is probably due to the decrease in chlorophyll and protein contents caused by the retardation of growth. The observed slow expansion of primary leaves could be also explained by the retardation of growth, but the fluorescence induction pattern from the leaves did not show characteristic symptoms of leaves under water stress.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.305-312
• /
• 2009

The effects of Quenching and Partitioning (Q&P) and Annealed Martensite (AM) heat treatment on the microstructure and tensile properties were investigated for 0.24C-0.5Si-1.5Mn-1Al steels. The Q&P steels were annealed at a single phase ($\gamma$) or a dual phase (${\gamma}+{\alpha}$), followed by quenching to a temperature between $M_s$ and $M_f$. Then, enriching carbon was conducted to stabilize the austenite through the partitioning, followed by water quenching. The AM steels were intercritically annealed at a dual phase (${\gamma}+{\alpha}$) temperature and austempered at $M_s$ and $M_s{\pm}50^{\circ}C$, followed by cooling in oil quenching. The dual phase Q&P steels showed lower tensile strength and yieldyield strength than those of the single phase Q&P steels, and tThe elongation for the dual phase Q&P steel was partitioning 100s higher than that of that for the single phase Q&P steels as the partitioning time was less than 100s up to partitioning 100s. For AM steels, the tensile/yield strength decreased and the total elongation increased as the austempering temperature increased. The stability of the retained austenite controlled the elongation for Q&P steels and the volume fraction of the retained austenite controlled the elongation for AM steels.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.411-418
• /
• 1989

본 연구에서는 물 및 물을 주성분으로 하는 NaCl, $Na_{2}$CO$_{3}$, NaOH 등의 비휘발성 수용액을 담금제로 하고 KS M 2172의 열처리유 냉각성능 실험 방법에서 채택하고 있는 은시편(순도 99.9%)을 이용한 표준냉각곡선으로부터 냉각 속도 열전달계수 및 담금강열도 등 담금제의 냉각성능 파라미터를 구하였으며, 각종 담금제의 온도 및 수용액의 농도 변화에 따른 냉각성능을 평가하였다. 그리고 실험에서 채택한 시편 및 담금제를 모델로 하여 축대칭 비정상 열전도방정식을 유한 요소법에 의하여 해석하고 냉각시간에 따른 시편의 온도분포를 계산하여 실험결과와 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.964-968
• /
• 1996

The demands of size and quality of large steel shaft forgings for ship building, power plant, steel plant, etc. are rapidly increasing, and some of these productions are manufactured from ingot weighing more than 300 tons. For use as rotating components. shafts require toughness, strength and homogeneity, and therefore are produced through a variety of heat treatments. According to the increase of ingot size, micro- and macrosegregation and also mass effect of the product increase. Thus, special care should be paid to the heat treatment of such large shaft forgings. In this paper, the heat treatment of large shaft forgings such as rotor and back-up roll is calculated using the commercial finite element code SYSWELD. Calculated distributions of temperature and phase are compared with experimental data. The continuous cooling transformation diagram, thermal and mechanical properites of each phase are used. The phase proportion, hardness and residual stress during water quenching are discussed.

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.453-458
• /
• 2022

We successfully synthesize water-dispersible CTAB-capped CdSe@ZnS quantum dots with the crystal size of the CdSe quantum dots controlled from green to orange colors. The quenching effect of Fe(DTC)₃ is very efficient to turn off the emission light of quantum dots at four molar ratios of the CdSe quantum dots, that is, the effective covering the surface of quantum dots with Fe(DTC)₃. However, the reaction with Fe(DTC)₃ for more than 24 h is required to completely realize the quenching effect. The highly quenched quantum dots efficiently detect nitric oxide at nano-molar concentration of 110nM of NO with 34% of recovery of emission light intensity. We suggest that Fe(DTC)₃-hybridized CdSe@ZnS quantum dots are an excellent fluorescence resonance energy transfer probe for the detection of nitric oxide in biological systems.

• 에너지공학
• /
• 제10권4호
• /
• pp.349-356
• /
• 2001

물과 증기의 직접접촉에 의한 응축 열전달은 움직이는 증기/물 경계면에서 열 및 물질 전달이 이루어지는 현상으로서, 매우 큰 열전달계수를 수반하는 특징이 있기 때문에 이를 응용한 설계가 산업계에서 광범위하게 이루어지고 있다. 본 연구에서는 단일 수평 배관을 통해 과냉각수가 있는 응축탱크로 안정된 증기제트가 방출될 때, 증기제트 형상을 예측하는 간단한 응축해석모델을 제시하였다. 해석모델은 축대칭 좌표계에서 질량, 운동량 및 에너지 방정식과 증기/물 경계면에서 의 응축 특성을 고려한 열평형 방정식을 사용하여 유도하였다. 증기/물 경계에서의 매우 큰 열전달율은 기존의 실험을 근거로 한 유효열전도계수에 의해 반영되었다. 해석결과는 실험결과와 비교하였고, 제시된 해석 모델은 실험에서 관찰된 바와 같이 증기 질량유속과 수조 온도가 증가할수록 증기제트 크기(반경 및 길이)가 증가하는 경향을 보였다.