• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.943-948
• /
• 2012

A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.791-797
• /
• 2017

본 연구에서는 Poly (dimethylsiloxane) (PDMS)의 높은 소수성과 생체분자들의 비특이적 흡착 문제를 해결하기 위해 PEO-PPO-PEO 블록 공중합체의 포매(embeddeing) 방식을 이용하여 손쉬운 표면 개질 및 이의 최적화 조건을 조사하였다. 친수성 표면 개질의 특성은 PDMS 내에 포매된 블록 공중합체의 농도, 수침(water-soaking), 및 소수성 표면으로 회복 시간 등의 영향을 평가하였다. 개질된 PDMS 표면은 알부민 단백질(2 mg/ml)까지 단백질의 비특이적 결합 방지 특성을 보였으며, 또한 O/W (Oil-in-Water) 에멀젼을 쉽게 형성할 수 있었다.

• Applied Biological Chemistry
• /
• 제46권1호
• /
• pp.39-45
• /
• 2003

냉동 생지 제조시 같은 밀을 이용해 회분 함량을 달리하여 제분한 밀가루로 만든 냉동 생지의 물성에 미치는 영향인 farinogram, amylogram. extensogram을 비교 조사하였고, 냉동 생지의 품질을 결정하는 2차 발효 시간, 빵 제품의 수분 함량,굽기 손실, 부피 및 경도에 미치는 영향을 $-20^{\circ}C$ 냉동고에서 제조직후부터 12주까지 저장하면서 비교 조사하였다. 회분 함량이 높은 밀가루의 경우 farinogram에서 흡수율과 약화도는 증가하였고, 반죽 전체의 강력도는 감소하였으며, 회분 함량이 낮은 밀가루의 경우 amylogram에서 반죽의 최고 점도시 온도와 최고 점도가 높게 나타났고, extensogram에서 면적과 저항도가 높게 나타났으며 발효 시간이 증가할수록 신장도는 감소하였고 2차 발효 시간도 가장 짧게 나타났다. 회분 함량이 높은 밀가루로 제조한 빵 제품의 수분 함량이 높게 나타났고 굽기 손실은 낮게 나타났으며 저장 기간에 따른 빵 제품의 경도 변화는 서서히 증가한 반면 회분 함량이 낮은 밀가루로 제조한 빵 제품의 부피가 가장 크게 나타났으며 경도는 낮게 나타났다. 냉동 저장 기간은 짧을수록 제품에 좋은 영향을 미치며 4주 이하가 가장 양호한 것으로 나타났다.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.65-71
• /
• 2003

압전 세라믹스를 이용하여 약품 분사용 초음파분사 노즐을 제작하였다. 정수장의 혼화 공정에 사용되는 약품(응집제)의 고효율 분산을 위해 분사 노즐을 설계하였으며 압전세라믹을 최적화하였다. 제작된 초음파 약품 분사 노즐을 패키징하여 정수장의 약품 혼화 과정에 적용하여 약품사용의 고 효율화와 사용량 저감을 위한 연구를 진행하였다. 압전체는 실리콘으로 마감처리를 하였으며 Al으로 패키징하였다. 본 초음파 분사 노즐 시스템을 적용하여 혼화지에 실험한 결과 약품의 순간 혼화를 촉진시키는 기술로 투입 약품량을 저감시킬 수 있을 것으로 판단된다. 초음파 발진 약품 분사시, 무발진과 비교하여 대장균 제거 효율에서 현저하게 높아졌다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.598-602
• /
• 2006

Local scour is associate with particular local types of vortex around bridge piers. This paper is method of protection local scour for the existing Busan City subway 3 Line bridge piers and Gupo large bridge piers. In order to take design of protection of local scour this bridge piers, We calculate the local scour hole of depth , scour width, riprap construction , filter construction by formulas. We had experimental hydraulic model test for this bridge piers in order to take proof for the calculation of local scour. We knew that the vortex intensifies the local flow velocities and acts to erode sediment from the scour hole and transport it downstream. As the result of hydraulic model test, we could suggest three types method of protection local scour this bridges. We knew that FHWA HEC-18(Richardson et al. 2001: Modified CSU) Formula is useful to checking calculation as application of field. One is pier protection using the sheet piles and riprap, the others are pier protection using the riprap with filter and to make renew Wall-caisson. The best method of protection for the existing Busan City subway 3 Line bridge piers and Gupo large bridge piers is pier protection using the sheet piles and riprap.

• 한국관개배수논문집
• /
• 제18권2호
• /
• pp.43-53
• /
• 2011

In this study, the internal development of the Saemangeum basic concept of the changes being promoted as a lead construction and agricultural land works(54.2 km) has established a numerical model for the scenario. Inner dike to the construction site to reflect the following conditions to reproduce the numerical model by each areas during construction inner dike where scour expected to perform a numerical analysis for the hydraulic review by areas with possible future changes were to predict. Simulation results showed that numerical simulation results for scour expected frequency of 100 years in flood conditions is simulated with 0.02 m/s~l.27 m/s scour velocity for high-impact factor is considered to be stable. Each start point and end point work area of inner dike reviewed and flow rate of 100 years flood, the velocity distribution in the influx of a large flow rate of 0.02 m/s~1.68 m/s occur during construction inner dike are not being evaluated as a special issue does not occur will be considered according to the method and order of construction inner dike stability review suggests that the future need to be made.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.275-282
• /
• 2020

Hranfa's marl, a local natural mineral, is selected for the decontamination by adsorption of aqueous effluents in textile industry. Its physicochemical characterization is first performed. It is composed mainly of Calcite, Quartz, Ankerite and Muscovite. Its specific surface area is 40 ㎡ g^-1. Its adsorption performance is then tested in batch conditions using an industrial organic dye, Bemacid Red E-TL, as a model pollutant. The measured adsorption capacity of Hranfa's marl is 16 mg g^-1 which is comparable to that of other types of natural adsorbents. A hybrid process is tested coupling adsorption of the dye on marl in suspension and microfiltration. An adsorption reactor is inserted into the circulation loop of a microfiltration pilot using ceramic membranes. This makes possible a continuous extraction of the treated water provided that a periodic replacement of the saturated adsorbent is done. The breakthrough curve obtained by analyzing the dye concentration in the permeate is close to the ideal one considering that no dye will cross the membrane as long as the adsorbent load is not saturated. These first experimental data provide proof of concept for such a hybrid process.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1088-1101
• /
• 2011

The purpose of this study was to examine the outdoor sportswear purchase behavior, outdoorwear sportswear brand preference, functional fabric awareness, and benefits sought. The research was performed through in-depth interview during February to March 2011. Data were collected from 10 consumers who had purchased outdoor sportswear and experienced camping in 6 months. First, the results from study showed that functionality/comfortability, design, color, and brand name were important factors in selecting outdoor sportswear. Offline stores were the main place to purchase, however, internet shopping mall and portal online community were another shopping channel as well. Second, respondents preferred imported outdoor sportswear brand to national brand. According to the study, the respondents trusted the imported outdoor sportswear quality based on the brand name, value, and brand history more than national brand. Third, consumers who had low functional fabric awareness were more likely to evaluate apparel products based on the brand name. Knowledge levels for textile functions were high in elastic, UV protection, air permeable, and antibacterial properties. The essential features for camping were water absorbing and quick dry, water resistance, wind proof, UV protection, and fire retardant properties. Finally the results showed that there were two sportswear benefit soughts: functionality and status ostentation.

• 한국기후변화학회지
• /
• 제5권3호
• /
• pp.257-266
• /
• 2014

This study aims to understand abnormal climate caused by impacts of climate change and to suggest the direction of urban planning focusing on adaptation to climate change. The study consists of theory consideration and case study(Chicago, Philadelphia, Seattle). As a result, the main impacts of climate change faced by urban areas are heat wave, precipitation, and drought. To prevent these impacts, it is important to prepare methods of urban planning as followings: planning for land use, park and green considering the climate patterns, establishing and managing water resources systems similar to the nature, securing renewable energy resources, and transportation facilities and exterior space with proof against climate. It is especially necessary to introduce infrastructures related to storm water, green roof, shading tree planting, green space, and permeable pavement. Finally, in order to realize urban planning for adaptation to climate change, it is needed to make the detailed and specific goal and strategy for the climate change adaptation plan and to extend the scope from the goals to an action plan, a detailed plan, and a design guideline.