• 한국화재소방학회논문지
• /
• 제33권4호
• /
• pp.1-8
• /
• 2019

천장이나 배관에 설치된 보온재의 연소로 인해 화재가 확산되는 사례가 발생함에 따라 수계소화설비의 배관보온재는 난연재료 성능 이상의 것을 사용하고 있다. 배관보온재의 일부분을 시편으로 가공하여 난연성능을 평가하고 있지만 설치환경을 고려한 실규모시험을 통한 평가는 이루어지지 않고 있다. 본 연구에서는 국내에서 널리 사용되고 있는 발포폴리에틸렌폼 및 고무발포보온재를 실규모 시험기준인 ISO 20632에 따라 시험하고 유럽의 난연성능 분류 기준과 비교하였다. 배관보온재 재료별로 상이한 난연성능을 보였으며, 특히 발포폴리에틸렌폼보온재의 경우 시공방법에 따라 화재성장율 및 열방출율이 달라졌다. 화재발생 시 배관보온재로 인한 연소확산을 지연시키기 위해서는 설치하는 대상공간의 특성을 고려한 난연성능 적용이 필요하며, 시공 시 사용하는 접착제와 테이프 등 부자재의 난연성 또한 고려해야 함을 확인할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.54-63
• /
• 2014

일반적으로 현장 플랜트는 모든 장치를 인력으로 직접 검사할 수 없을 정도로 매우 크다. 따라서 장치장의 사고를 사전에 방지하기 위한 자동화된 시스템은 필수적이다. 그러나 기존의 감시 시스템에서는 시각화 및 센서 값을 관찰하기 위한 모듈을 각 상황에 맞게 프로그래머가 따로 개발해야하는 단점이 있다. 이러한 문제점을 해결하기 위해 우리는 구성할 시스템을 메타 기술파일로 서술할 수 있는 규칙기반 언어를 정의하고, 이 메타 기술파일로부터 감시시스템이 자동으로 생성되는 새로운 시스템 생성도구를 개발하였다. 이를 통해 관리자는 메타 기술파일을 이용하여 각 현장에 맞는 감시 시스템을 빠르고 즉각적으로 생성할 수 있다. 개발한 생성 도구를 유수탱크 플랜트 설비에 적용해서 다양한 형식의 모니터링 시스템을 생성할 수 있음을 실험에서 보였다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.836-842
• /
• 2016

When an accident occurs in the nuclear power plant, the faulted information might mislead to the high possibility of aggravating the accident. At the Fukushima accident, the operators misunderstood that there was no core exposure despite in the processing of core damage, because the instrument information of the reactor water level was provided to the operators optimistically other than the actual situation. Thus, this misunderstanding actually caused to much confusions on the rapid countermeasure on the accident, and then resulted in multiplying the accident propagation. It is necessary to be equipped with the function that informs operators the status of instrument integrity in real time. If plant operators verify that the instruments are working properly during accident conditions, they are able to make a decision more safely. In this study, we have performed various tests for the fault detection sensitivity of an data-driven empirical model to review the usability of the model in the accident conditions. The test was performed by using simulation data from the compact nuclear simulator that is numerically simulated to PWR type nuclear power plant. As a result of the test, the proposed model has shown good performance for detecting the specified instrument faults during normal plant conditions. Although the instrument fault detection sensitivity during plant accident conditions is lower than that during normal condition, the data-drive empirical model can be detected an instrument fault during early stage of plant accidents.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.48-55
• /
• 2010

The many vessels are built with FRP(Fiber-Reinforced Plastic) material for small boats and medium vessels. However, FRP is impossible to be used for recyclable material owing to environmental problems and causes large proportion of collision accidents because radar reflection wave is so weak that large vessels could not detect FRP ships during the sailing. Hence, Al alloy comes into the spotlight to solve these kinds of problems as a new-material for next generation instead of FRP. Al alloy ships are getting widely introduced for fish and leisure boats to save fuel consumption due to lightweight. In this study, it was selected 6061-T6 Al alloy which are mainly used for Al-ships and carried out various electrochemical experiment such as potential, anodic/cathodic polarization, Tafel analysis, potentiostatic experiment and surface morphologies observation after potentiostatic experiment for 1200 sec by using the SEM equipment to evaluate optimum corrosion protection potential in sea water. It is concluded that the optimum corrosion protection potential range is -1.4 V ~ -0.7 V(Ag/AgCl) for 6061-T6 Al alloy, in the case of application of ICCP(Impressed current cathodic protection), which was shown the lowest current density at the electrochemical experiment and good specimen surface morphologies after potentiostatic experiment for Al-Mg-Si(6061-T6) Al alloy in seawater environment.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.57-65
• /
• 1996

The latest date, No. 1 YouII was grounded and sunk into the sea at MAMHYUNGJEDO ( South brother Island) in Sep. 21. 1995, and M.V. Sea Prince of V.L.C.C also made a big oil poullution accident owing to Typhoon "Paei" at front sea of Yeu Choun on Jul. 25. 1995. The large or small scall scale of oil poullution accident frequently was occurred about 300-350 cases per ine(1) year. The countries advanced in marine relations like as, nited Kingdom and Japan, have perfect system The country of expert education, training and oil recovery equipments in oil poullution accidents. The large quantity oil skimming ship's basic condition need general skimming ship which was high speed and large quantity skimming ability , and hve to store the recovered oil into tanks This oil skimming shop are composit the skimmer whuch move up and down according to the wace movements, storage tank which storage the recovered oil in after side, transfer pump which transformed from flooding tank to separating tank and separating tank which separated the oil mixtures, Also there are cylindrical floated which keep the auto positing, gate which keep the auto positing, gate which protect and guide the recovering oil from sea and balance weight for skimmer balance. Also there are cylindrical floated which keep the auto positing, gate which protect and guide the recovering oil from sea and balance weight for skimmer balance. The important arrangement is twin arm which moved by two hinge and move te skimming unit by wave movement. In gate of inside, made long wear in the gate bellow position, there are also connected the flexible hose for oil mixtures drop. The separating tank composited with multi-divided bulkhead for ffective oil and sea water separating by settling and flotation principle. As use the above natural princile and equipment, we can remove the large quantity oil by developed oil skimming ship.ming ship.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.871-894
• /
• 2013

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), for transient and accident simulations of advanced pressurized water reactors (PWRs). Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This $2^{nd}$ ATLAS DSP (DSP-02) exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data.

• 보건교육건강증진학회지
• /
• 제31권5호
• /
• pp.159-166
• /
• 2014

Purpose: In spite of many Healthy Cities projects in Korea, there are few research about healthy urban planning. So we tried to use available recent models to a Healthy Cities project in a medium sized city in Gyeongnam province. Methods: Using mainly European Healthy Urban Planning Model and opinion leader survey, SWOT analysis, forum and discussion have been done to a city. Secondary city health indicator obtained from Ministry of Statistics. Results: There are strong need to develop health industry, green traffic and healthy living from survey using Healthy Cities policy direction of Korean Health Promotion Fund. Among the Healthy Urban Planning objectives, improvements of physical environments, prevention of accidents and crime, improvements of healthy esthetics rated highly. Although environmental pollution was problem local government push forward to the pilot healthy urban project as active healthy water-front development. Considering secondary healthy city indicators, change of external forces and internal capacity final task for healthy urban planning for Yangsan city were development of riverside physical education park and active living and anti-ageing environments etc. Conclusions: Comprehensive assessment and plan was possible through MAPP Model using European Healthy Urban Planning objectives to draw the direction of future urban planning for Healthy Cities Projects. Further research and formal introduction would be needed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.30-31
• /
• 2009

본 연구의 목적은 쾌속여객선과 수중부유물과의 실선 충돌응답해석을 통하여 선체와 승객의 내충격 안전성 평가를 수행하는 것이다. 그동안 수중부유물과의 충돌사고로부터 발생하였던 선체와 승객들의 손상자료들을 면밀히 검토하고 평가하여 쾌속여객선 수중익 시스템의 수중부유물과의 충돌에 의한 손상구조를 철저히 파악함으로써 내충격 안전성 평가를 위한 다양한 충돌 시나리오를 작성할 수 있었다. 주변 유체를 고려하는 LS-DYNA 코드의 유체-구조 연성 해석기법과 국부 zooming 해석기법을 사용하여 쾌속여객선의 수중부유물과의 충돌응답해석을 수행하여 선체와 승객의 내충격 안전성 평가를 수행하였다.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• 공업화학
• /
• 제25권1호
• /
• pp.27-33
• /
• 2014

석유누출 사고로 인해 토양과 지하수 오염이 점차 증가되면서, 토양환경에 대한 중요성이 늘고 있다. 토양오염은 다른 환경오염에 비해 많은 정화비용과 긴 정화기간이 요구된다. 이런 이유로 토양오염이 발생되면, 어떤 오염물질에 의해 토양이 오염되었으며, 토양정화의 책임이 있는 오염자가 누구인지 법적 분쟁이 많이 발생되고 있다. 본 연구에서는 토양오염을 발생시킬 수 있는 항공유에 대한 물성 분석과 함께 항공유 내의 특정 첨가제를 분석함으로써 등유와 항공유의 구분법을 찾아내었다. 특히 발색제에 의해 등유 내 화학적 식별제만 발색되었으며, GC-MS 분석결과 항공유에서만 산화방지제와 금속불활성제가 분석되었다. 이는 추후 항공유에 의한 토양오염 야기 시, 어떤 석유제품에 의한 오염인지 쉽게 판단이 가능할 것이다.