• Journal of Chitin and Chitosan
• /
• v.23 no.4
• /
• pp.285-292
• /
• 2018

In this study, for the purpose of decomposing food waste, the strain was screened from traditional fermented food and soils. The enzyme activity (protease, amylase, cellulase, lipase) experiment was carried out using the paper disc method in 212 strains isolated from 5% NaCl media. Among them, only the strains having enzyme activity of more than 2 (soil) or more than 4 (traditional fermented food) with the halozone of enzyme activity of 15 mm or more were selected first, and microorganism identification through 16S rRNA sequencing was performed. Finally, were identified such as Bacillus subtilis, Bacillus amyloliquefaciens, Bacillus siamensis, Bacillus licheniformis, Bacillus aquimaris, Bacillus megaterium, Bacillus koreensis, Bacillus stratoshericus, Bacillus aryabhattai, Bacillus safensis, Marinobacter hydrocarbonoclasticus. 11 species of mixed strains were confirmed that the culture time was 24 hours, the incubation temperature was $30^{\circ}C$ and the optimum pH was 7.0. In order to confirm the degree of decomposition of standard food wastes (100 g) by treating 11 kinds of mixed strains (25%), solid content of more than $2000{\mu}m$ was determined to be 103 g for the sterilized water group and 18 g for the mixed strains group. And the rest was decomposed to a size of less than $2000{\mu}m$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.171-176
• /
• 1975

The rate and extent of decomposition of rice straw and compost in an acid sulfate soil amended with urea and lime and incubated under aerobic and anaerobic(flooded) conditions were investigated in the laboratory. Results are summarized as follows: 1. The rate of compost(alone) decomposition in a flooded soil was more than twice as high as all other treatments, which included rice straw+urea, rice straw+lime, rice straw (alone), and compost+lime. Lime appeared to suppress the decomposition of compost in a flooded soil but actually enhanced its decomposition under aerobic conditions. 2. Compost decomposition in both anaerobic and aerobic environments was characterized by single maximum peak rates of $CO_2$ evolution that were reached soon after the start of incubation. 3. Both urea and lime greatly increased the rate and extent of rice straw decomposition in the soil when incubated aerobically, although urea had a greater effect than did liming. Decomposition rates were characterized by the appearance of two maximum peak rates, a greater primary peak and a smaller secondary peak. 4. The percent decomposition of rice straw in soil incubated aerobically was approximately half (10.8%) that of compost(23.1%). However, percent decomposition of these substrates in soil amended with lime was essentially the same; i.e., rice straw+lime (29.4%) and compost+lime(31.6%). 5. There is a need to investigate the possible interaction between the addition of lime (pH) and supplemental nitrogen applied to acid sulfate soils and how this interaction might affect the decomposition of organic wastes and residues.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.54-62
• /
• 2011

This study was undertaken to investigate the effects of bone waste on the conservation of nitrogen in aerobic composting process by inducing the struvite crystallization, which was known as a powerful method for conservation of nitrogen in composting reaction. Bone waste was dried at oven and crushed to less than 3 mm prior to use. It was found phosphorus content in bone waste was about 20.9% of the fixed solids from the leaching experiments using sulfuric acid. Addition of seed compost affected the progress of composting reaction substantially. In case seed compost was not used, the duration of initial low pH was greater than seed compost was added. This prolonged acidic pH may have a beneficial effect on the leaching of P from the bone waste and struvite crystallization. The struvite crystallization and resulting conservation of nitrogen by addition of bone waste was confirmed by both reduction in ammonia loss and increased ammonia content in compost. However the level of struvite crystallization observed with bone waste addition may be less than the cases water-soluble phosphate salts were used.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2021

Plastic wastes generated from household waste are separated by mixed discharge with foreign substances, and recycling is relatively low. In this study, the effect of the ratio and content of mixed plastic waste coarse aggregate(MPWCA)s and mixed plastic waste fine aggregate(MPWFA)s filled with blast furnace slag fine powder on the slump and compressive strength of concrete was evaluated experimentally. The MPWCAs were found to have a similar fineness modulus, but have a single particle size distribution with a smaller particle size compared to coarse aggregates. However, the MPWFAs were found to have a single particle size distribution with a larger fineness modulus and particle size compared to fine aggregates. Meanwhile, the effect of improving the density and filling pores by the blast furnace slag fine power was found to be greater in the MPWFA compared to the MPWCA. As the amount of the mixed plastic waste aggregate(MPWA)s increased, the slump and compressive strength of concrete decreased. In particular, the lower the slump and compressive strength of concrete was found to decrease the greater the amount of MPWFA than MPWCA when the amount of MPWA was the same. This is because of the entrapped air and voids formed under the angular- and ROD-shaped aggregates among the MPWFAs. On the other hand, the addition of the admixture and the increase in the unit amount of cement were found to be effective in improving the compressive strength of the concrete with MPWAs.

• Clean Technology
• /
• v.27 no.3
• /
• pp.247-254
• /
• 2021

In this study, an eco-friendly combustion process of waste 2,4,6-trinitrotoluene (TNT: 2,4,6-trinitrotoluene) was developed, and fundamental data for the quantity of the organic matter in the final combustion residues is presented. Because complete combustion of TNT is not possible theoretically, the combustion process was optimized to reduce organic matter content in the combustion residue by performing measures such as heating time changes, addition of propellant material, and after treatment using a high-temp electrical furnace. From the results, it was confirmed that the organic matter content in the residue could be decreased to 7 ~ 10% with each method. The quantity of the organic matter could be minimized by optimizing the combustion conditions of the process. With only a combustion time increase, the amount of organic matter in the combustion residues was measured at about 9 wt%. The environmental friendliness of the final exhaust gas was also confirmed by real time gas component analyses. In addition, the organic contents could be reduced by a further 2 wt% by applying an additional heat treatment using an external electric furnace after the first incineration treatment. In the combustion process of propellant added waste TNT, it was found that various TNT wastes could be treated using the same eco-friendly protocols because the organic content in the residue decreased in accordance with the amount of propellant. The amount of the organic matter content produced by all these methods fulfilled the requirements under the Waste Management Act.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.451-459
• /
• 2021

The purpose of this study is to evaluate the performance of a solidifying agent for recycling the fine powder separated from the nuclear power plant decommissioned concrete as a solidifying agent(SA) for radioactive waste. In order to evaluate the performance of the solidifying agent, a powder simulating the fine powder of waste concrete separated from the dismantled concrete of a nuclear power plant was produced, and the main variables were the type of binder and the replacement ratio of zeolite. The solidifying agent was evaluated for fluidity performance, compressive strength, and leaching resistance to non-radioactive cesium. The compressive strength of SA increased as the zeolite replacement ratio increased, and the SA containing 5% or more of zeolite showed a compressive strength that was 1.4 to 1.7 times higher than the acceptance criteria. The cesium leaching index of all specimens was 6 or higher, satisfying the acceptance criteria, and the leaching index of SA was 1.47~1.63 times higher than that of OPC. In particular, the average leaching index after 28 days of the 5% zeolite-substituted solidifying agent was 9.15, which was improved by about 6.4% compared to OPC, and it was confirmed that the zeolite was effective in improving the leaching resistance to cesium ions by showing stable performance over the entire period.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.297-303
• /
• 2019

The nuclear medicine department of a domestic medical institution uses $^{99m}TcI$, a radionuclide, from $^{99}Mo/^{99m}TcI$ Generator, to inject radioactive drugs into patients. Among the expired generators, imported from foreign countries, the medical institution implements its own disposal. Each medical institution shall satisfy the permitted in-house disposal concentration of radioactive wastes. The guidelines for self-disposal presented in Korea suggested that self-disposal can be performed 80 days after the generator is used. The purpose of these guidelines is to analyze them by comparing them with the data measured directly with the generator and to study if they are feasible. As a result, the generator with a capacity of 1,000 mCi has the longest half-life, and when tested with a high-radiation Mo(molybdenum) column, the number of days that are below the permitted concentration of body disposal with radioactive waste was 72 days and 71 days that were derived from direct column measurement. The results of the direct study confirmed that the guidelines for in-house disposal in Korea were reasonable, as there were 8 to 9 days of storage compared to the number of in-house disposal days provided in the guidelines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.497-505
• /
• 2018

In a situation where the amount of bulky waste needs to be quantified, a three-dimensional model of the wastes can be constructed using drones. This study constructed a drone-based 3D model with a range of flight parameters and a GCPs survey, analyzed the relationship between the accuracy and time required, and derived a suitable drone application technique to estimate the amount of waste in a short time. Images of waste were photographed using the drone and auto-matching was performed to produce a model using 3D coordinates. The accuracy of the 3D model was evaluated by RMSE calculations. An analysis of the time required and the characteristics of the top 15 models with high accuracy showed that the time required for Model 1, which had the highest accuracy with an RMSE of 0.08, was 954.87 min. The RMSE of the 10th 3D model, which required the shortest time (98.27 min), was 0.15, which is not significantly different from that of the model with the highest accuracy. The most efficient flight parameters were a high overlapping ratio at a flight altitude of 150 m (60-70% overlap and 30-40% sidelap) and the minimum number of GCPs required for image matching was 10.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.539-546
• /
• 2019

Global warming has mentioned as one of the international problems and these researches have conducted. Carbon Capture, Utilization and Storage (CCUS) technology has improved due to increasing importance of reducing emission of carbon dioxide. Among of various CCUS technologies, mineral carbonation can converted $CO_2$ into high-cost materials with low energy. Existing researches has been used ions extracted solid wastes for mineral carbonation but the procedure is complicated. However, the procedure using seawater is simple because it contained high concentration of metal cation. This research is a basic study using seawater-based wastewater for mineral carbonation. 3 M Monoethanolamine (MEA) was used as $CO_2$ absorbent. Making various concentrations of seawater solution, simulated seawater powder was used. Precipitated metal carbonate salts were produced by mixing seawater solutions and $rich-CO_2$ absorbent solution. They were analyzed by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Thermogravimetric Analysis (TGA) and studied characteristic of producing precipitated metal carbonate and possibility of reusing absorbent.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.127-137
• /
• 2019

Zr electrorefining is demonstrated herein using Zirlo tubes in a chloride-fluoride mixed molten salt in the presence of $AlF_3$. Cyclic voltammetry reveals a monotonic shift in the onset of metal reduction kinetics towards positive potential and an increase in intensity of the additional peaks associated with Zr-Al alloy formation with increasing $AlF_3$ concentration. Unlike the galvanostatic deposition mode, a radial plate-type Zr growth is evident at the top surface of the salt during Zr electrorefining at a constant potential of -1.2 V. The diameter of the plate-type Zr deposit gradually increases with increasing $AlF_3$ concentration. Scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) analyses for the plate-type Zr deposit show that trace amount of Al is incorporated as Zr-Al alloys with different chemical compositions between the top and bottom surface of the deposit. Addition of $AlF_3$ is effective in lowering the residual salt content in the deposit and in improving the current efficiency for Zr recovery.