• 자원리싸이클링
• /
• 제18권1호
• /
• pp.58-67
• /
• 2009

국내 포토레지스트 스트리퍼의 연간 소요량은 약 1000억원 규모(50, 000톤)로 대부분 전량 수입에 의존하고 있으나, 폐스트리퍼에는 각종 불순물이 함유되어 있어, 소각 또는 낮은 수준으로 재활용되어 오는데 그치고 있다. 최근 경제적 측면과 효율성 측면에서 스트리퍼 폐액의 재활용 기술이 폭넓게 연구되고 있다. 본 논문에서는 스트리퍼 폐액의 재활용에 관한 특허 기술을 분석하였다. 분석범위는 2007 9월까지 미국, 유럽연합, 일본과 한국에서 출원 및 공개된 특허로 제한하였다. 특허들은 전체적으로 검색어를 사용하여 수집되었고, 기준 기술 이외의 것을 여과하였다. 특허기술의 경향은 년도와 국가별, 기업 및 관련기술 분야별로 분석되었다.

• 자원리싸이클링
• /
• 제15권4호
• /
• pp.60-63
• /
• 2006

국내 알루미늄 재생업체에서 알루미늄 용해시 발생되는 알루미늄 폐드로스를 사용하여 수처리응집제로 사용되는 황산알루미늄을 제조하였다. 알루미늄 폐드로스를 황산과 반응시켜 폐드로스 중에 잔류하는 금속알루미늄을 황산알루미늄용액으로 제조함으로써 수산화알루미늄을 원료로 사용하여 황산알루미늄을 제조하는 종래의 방법에 비해 제품의 원료비를 줄일 수 있고, 알루미늄 폐드로스를 재활용함으로써 매립 등으로 폐기시켜야 할 폐드로스의 양을 줄이는 효과가 있었다.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.216-221
• /
• 2007

The adsorption characteristics of malachite green on waste garnet have been investigated for its treatment from aqueous solution by employing waste garnet which is generated from the abrasive production process as an adsorbent. The influential factors examined were the initial concentration of malachite green in solution, reaction temperature, and the amount of adsorbent. Also, the effect of the modification of the surface of adsorbent on adsorption was examined. As the initial malachite green was increased with reaction temperature and the color removal of malachite green-containing solution was promoted with the amount of adsorbent. Finaly, increased adsorption of malachite green could be attained when the surface of glass was modified by hexamethyldisilazane.

• 환경영향평가
• /
• 제4권2호
• /
• pp.59-70
• /
• 1995

The solution-state of a reclaimed waste would be known to the method in using an analysis for seepage. But it is not the best method in the huge landfill reclaimed all kinds of the waste at random. Especially in case of the landfill called the Nan Gi-do located along the Han-river, it is difficult to judge the generative seepage to be flowed in to the Han-river. So to plan the effective stabilization on a landfill, it is very useful survey method using the Landsat TM image. Operating a heat-distribution analysis with the Landsat TM image, in case of a landfill not having definite data, we would assume the reclaimed sections of the waste to judge a solution-speed late comparatively such as a industry waste or a harmful waste through the heat change.

• 환경영향평가
• /
• 제22권6호
• /
• pp.713-724
• /
• 2013

In terms of waste load allocation, inequality of waste load discharge must be considered as well as economic aspects such as minimization of waste load abatement. The inequality of waste load discharge between areas was calculated with Gini coefficient and was included as one of the objective functions of the multi-objective waste load allocation. In the past, multi-objective functions were usually weighted and then transformed into a single objective optimization problem. Recently, however, due to the difficulties of applying weighting factors, multi-objective genetic algorithms (GA) that require only one execution for optimization is being developed. This study analyzes multi-objective waste load allocation using NSGA-II-aJG that applies Pareto-dominance theory and it's adaptation of jumping gene. A sensitivity analysis was conducted for the parameters that have significant influence on the solution of multi-objective GA such as population size, crossover probability, mutation probability, length of chromosome, jumping gene probability. Among the five aforementioned parameters, mutation probability turned out to be the most sensitive parameter towards the objective function of minimization of waste load abatement. Spacing and maximum spread are indexes that show the distribution and range of optimum solution, and these two values were the optimum or near optimal values for the selected parameter values to minimize waste load abatement.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.35-39
• /
• 2008

This experimental study examines the applicability of polymer mortar permanent forms using a methyl methacrylate (MMA) solution of waste expanded polystyrene (EPS) to develop effective recycling processes for the EPS, referring to the flexural behavior of a polymer-impregnated mortar permanent form with almost the same performance as commercial products. An MMA solution of EPS is prepared by dissolving EPS in MMA, and unreinforced and steel fiber-reinforced polymer mortars are mixed using the EPS-MMA-based solution as a liquid resin or binder. Polymer mortar permanent forms (PMPFs) using the EPS-MMA-based polymer mortars without and with steel fiber and crimped wire cloth reinforcements and steel fiber-reinforced polymer-impregnated mortar permanent form (PIMPF) are prepared on trial, and tested for flexural behavior under four-point (third-point) loading. The EPS-MMAbased PMPFs are more ductile than the PIMPF, and have a high load-bearing capacity. Consequently, they can replace PIMPF in practical applications.

• 한국환경농학회지
• /
• 제24권1호
• /
• pp.24-28
• /
• 2005

본 연구에서는 시설하우스 폐양액이 고추의 생육과 양분 흡수에 미치는 영향을 평가하고 폐양액 관주시 부가적으로 얻을 수 있는 관개 효과를 산출함으로써 폐양액의 토양 시비에 따른 농업적 가치를 평가하였다. 시설하우스 폐양액의 토양 관주시 Ca, Mg K 등 염류의 증가로 인하여 pH와 EC는 상승하였고, 총질소는 암모늄태 질소와 질산태 질소의 증가와 함께 처리 후 100 mg $kg^{-1}$ 이상 증가하였다. 고추 생육은 화학비료 70% 및 폐양액 30% 혼합처리구와 화학비료 50% 및 폐양액 50% 혼합처리구에서 양호하였으며 양분 흡수도 동일한 경향을 나타내었다. 고추 수확량은 화학비료 70% 및 폐양액 30% 혼합처리구에서 가장 높은 것으로 조사되었다. 1일 발생되는 폐양액(288 L 10 $a^{-1}\;day^{-1}$)을 토양에 시용하여 증발산되는 수분을 보충할 경우 최고 $409.86m^2$의 면적을 관개할 수 있는 것으로 산출되었다. 이상의 결과를 통해 폐양액의 토양처리는 화학비료 대체 효과와 폐양액의 정화 효과를 동시에 얻을 수 있으며 적정량 시용시 주변 환경에 미치는 영향을 최소화하면서 지속적인 처리가 가능할 것으로 판단되었다.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.43-49
• /
• 2000

A laboratory experiments were performed to investigate the effects of several factors on the phosphorus removal by waste oyster shells. The waste oyster shells used in this experiments were crushed particle, calcined particle and extracted solution. A higher efficiencies of phosphorus removal were observed, when a particle size of crushed and calcined particle were smaller. The effluent concentration of phosphorus was around 1.6mg/ι in continuous column experiment which packed with crushed particle of waste oyster shell at the influent concentration of PO4-P of 10 mg/ι. But the clogging of column occurred with increasing of throughput volume of influent. The efficiency of phosphorus removal increased with increasing of dosage amount of crushed, calcined particle and extracted solution. When the calcined particle which contained only about 1/10~1/100 of crushed particle was used, the efficiency of phosphorus removal was correspondingly equivalent to the removal efficiency obtained from crushed particle. The efficiency of phosphorus removal by calcined particle after 9 runs repeated use was decreased about 21.5% as that of the first run. The removal efficiency of 100% could have been achieved at the HRT of 18 hours during the continuous treatment of phosphorus by the solution extracted from calcined particle.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.34-40
• /
• 2005

무전해 Co-Cu-P 폐 도금액의 재사용에 대해 소정의 조건에서 조사하였다. 아연화처리한 후 코발트 촉매의 처리는 코발트 촉매 처리를 하지 않았을 때 보다 도금시간이 연장되었다. Batch type에서 새로 제조한 도금액에 폐 도금액을 $50\%$ 첨가하여도 무전해 Co-Cu-P폐 도금액의 재사용이 가능하였다. 새로 제조한 도금액에 소모된 도금액의 성분을 연속적으로 보충하여 도금하면(Continuous 쇼pe), 보충하지 않았을 경우(Batch type) 보다 도금시간이 7.5배 연장되었다. 새로 제조한 도금액에 폐 도금액 $50\%$를 첨가하여 소모된 도금액의 성분을 연속적으로 보충할 경우(Continuous type)의 도금시간은 보충하지 않았을 경우(Batch type)의 도금시간 보다 2.5배 연장되었다. 도금층의 불량과 급격한 도금속도의 감소는 도금층의 Co와 Cu의 성분 변화에 큰 영향을 미쳤다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.894-898
• /
• 2016

Solution plasma is a unique method which provides a direct discharge in solutions. It is one of the promising techniques for various applications including the synthesis of metallic/non-metallic nanomaterials, decomposition of organic compounds, and the removal of microorganism. In the context of nanomaterial syntheses, solution plasma has been utilized to produce carbon nanoparticles and metallic-carbon nanoparticle systems. The main purpose of this study was to synthesize nickel nanoparticles embedded in a matrix of carbon particles by solution plasma in one-step using waste vegetable oil as the carbon source. The experimental setup was done by simply connecting a bipolar pulsed power generator to nickel electrodes, which were submerged in the waste vegetable oil. Black powders of the nickel nanoparticles-embedded carbon (NiNPs/Carbon) particles were successfully obtained after discharging for 90 min. The morphology of the synthesized NiNPs/Carbon was investigated by a scanning electron microscope, which revealed a good dispersion of NiNPs in the carbon-particle matrix. The X-ray diffraction of NiNPs/Carbon clearly showed the co-existence of crystalline Ni nanostructures and amorphous carbon. The crystallite size of NiNPs (through the Ni (111) diffraction plane), as calculated by the Scherrer equation was found to be 64 nm. In addition, the catalytic activity of NiNPs/Carbon was evaluated by cyclic voltammetry in an acid solution. It was found that NiNPs/Carbon did not show a significant catalytic activity in the acid solution. Although this work might not be helpful in enhancing the activity of the fuel cell catalysts, it is expected to find application in other processes such as the CO conversion (by oxidation) and cyclization of organic compounds.