DOI QR코드

DOI QR Code

Flexural Behavior of Polymer Mortar Permanent Forms Using Methyl Methacrylate Solution of Waste Expanded Polystyrene

  • Bhutta, M. Aamer Rafique (Research and Development Center, Takamura Holdings Co., Ltd.) ;
  • Tsuruta, Ken (Materras Oume Concrete Industry, Co., Ltd.) ;
  • Ohama, Yoshihiko (Research Center for Advanced Mineral Aggregate Composite Products Kangwon National University)
  • Published : 2008.06.30

Abstract

This experimental study examines the applicability of polymer mortar permanent forms using a methyl methacrylate (MMA) solution of waste expanded polystyrene (EPS) to develop effective recycling processes for the EPS, referring to the flexural behavior of a polymer-impregnated mortar permanent form with almost the same performance as commercial products. An MMA solution of EPS is prepared by dissolving EPS in MMA, and unreinforced and steel fiber-reinforced polymer mortars are mixed using the EPS-MMA-based solution as a liquid resin or binder. Polymer mortar permanent forms (PMPFs) using the EPS-MMA-based polymer mortars without and with steel fiber and crimped wire cloth reinforcements and steel fiber-reinforced polymer-impregnated mortar permanent form (PIMPF) are prepared on trial, and tested for flexural behavior under four-point (third-point) loading. The EPS-MMAbased PMPFs are more ductile than the PIMPF, and have a high load-bearing capacity. Consequently, they can replace PIMPF in practical applications.

Keywords

References

  1. Choi, N. W. and Ohama, Y., "Basic Properties of New Polymer Mortars Using Waste Expanded Polystyrene Solution-Based Binders," Journal of Polymer Engineering (Special Issue), Vol. 23, No. 5, 2003, 369 pp
  2. Choi, N. W., Moroka, A., and Ohama, Y., "Properties of Polymer Mortars Using Methyl Methacrylate Solutions of Waste Expanded Polystyrene," Proc. of the Fourth Asia Symposium on Polymers in Concrete, Kangwon National University, Chuncheon, Korea, 2003, 105 pp
  3. Choi, N. W. and Ohama, Y., "Development and Testing of Polystyrene Mortars Using Waste EPS Solution-Based Binders," Construction and Building Materials, Vol. 18, No. 4, 2004, 235 pp https://doi.org/10.1016/j.conbuildmat.2004.01.003
  4. Bhutta, M. A. R., Tsuruta, K., and Shindo, T., "Manufacturing and Applications of Polymer-Impregnated Concrete (PIC) Permanent Form in Japan: Current Status," Proc. of the 5th Asian Symposium on Polymers in Concrete, Structural Engineering Research Centre, Chennai, India, 2006, 559 pp
  5. Bhutta, M. A. R., Tsuruta, K., Takamura, S., and Shindo, T., "Sustainability of Polymer-Impregnated Concrete Panel as Permanent Form," Proc. of the International Conference on Concrete Repair, Rehabilitation and Retrofitting, Taylor & Francis, London, 2006, 86 pp

Cited by

  1. Effects of polymer–cement ratio and accelerated curing on flexural behavior of hardener-free epoxy-modified mortar panels vol.43, pp.3, 2010, https://doi.org/10.1617/s11527-009-9578-8