• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.657-665
• /
• 2010

Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.143-150
• /
• 2003

The synthesis gas generated in waste pyrolysis melting process which consists of pyrolysis of waste and melting process of ash is known to be an alternative fuel. Since the compositopn of synthesis gas is much different from other synthesis gases, the fundamental combustion characteristics are analyzed in this study. The radiation heat heat flux is used to estimate the heat flux from flames made by many combinations of fuel and oxidant supply. The results show that the synthesis gas needs much more amount of oxidant for equivalent heat flux to methane flame and the inverse diffusion flame type for synthesis gas burner is suitable for better radiation heat transfer.

• 멤브레인
• /
• 제31권5호
• /
• pp.327-332
• /
• 2021

멤브레인 기반의 MBRWG (Membrane Bioreactor for Waste Gas) 처리기술은 폐가스 흐름에 대한 높은 선택성을 바탕으로 효과적인 생물학적 제거를 수행할 수 있다. MBRWG에는 몇 가지 잠재적 이점이 있는데, 이 중 가장 두드러진 점은 기상과 액상이 멤브레인 양쪽으로 명확히 분리되어 액상 내 생물막의 최적제어가 용이하고 이를 통해 효과적인 생분해와 생물막의 활성화를 도모할 수 있다는 것이다. MBRWG 처리기술은 특히 xylene 같은 소수성 독성 기체 성분 제거에 유리한데 이는 소수성 기체의 물질전달속도, 독성 및 제거율이 생물막 인근의 액상흐름 및 수분제어에 민감하게 변화하기 때문이다. MBRWG 처리에 쓰이는 다양한 멤브레인 중에서 PDMS-중공사막(hollow fiber)이 가장 높은 기체 물질 전달을 제공한다고 보고되었다. Capillary 형태도 중공사막형태에 비해 비표면적은 낮지만 비교적 활발한 연구가 진행되고 있다. 소수성 기체성분 제거 외에도 기존 생물학적 폐가스 처리 장치에서 배출된 잔류 기체 혼합물이나 먼지를 제거하기 위한 후단 공정에서 멤브레인 활용을 고려할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.355-360
• /
• 2003

Recently, a cement plays an important roll in the materials field. So, in this research we would like to study on the properties of waste gas reduction in the photocatalytic cement. The fundamental phenomena of waste gas reduction in the photocatalytic cement were observed by the NOx analyzer with reaction chamber, UV Lamp, MFC, and humidity control bath. As a result of this study, the photocatalytic cement used photocatalytic powder, admixture and other materials can obtain NOx gas reduction and its photocatalytic efficiency. Developing for the photocatalytic cement, we need a various study.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.618-629
• /
• 2019

Along with growing population and economic development, increasing waste generation rates in developing countries have become a major issue related to the negative impacts of waste management on the environment. Currently, the business-as-usual waste management practices in Myanmar are largely affecting the environment and public health. Therefore, this study developed an alternative approach to waste management for reducing the environmental impacts in Myanmar by highlighting the greenhouse gas (GHG) emissions from business-as-usual practices and three proposed scenarios during 2018-2025. The calculation methods of the Intergovernmental Panel on Climate Change and Institute for Global Environmental Strategies were used for estimating the GHG emissions from waste management. It was estimated that the current waste management sector generated approximately 2,000 gigagrams of CO₂-eq per year in 2018, trending around 3,350 Gg of CO₂-eq per year in 2025. It was also observed that out of the proposed scenarios, Scenario-2 significantly minimized the environmental impacts, with the lowest GHG emissions and highest waste resource recovery. Moreover, the GHG emissions from business-as-usual practices could be reduced by 50% by this scenario during 2018-2025. The target of the similar scenario could be achieved if the local government could efficiently implement waste management in the future.

• 한국연소학회지
• /
• 제7권2호
• /
• pp.42-48
• /
• 2002

Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.

• 한국환경보건학회지
• /
• 제32권1호
• /
• pp.8-18
• /
• 2006

The aim of this study is to evaluate the emission characteristics of mercury, lead, arsenic, and selenium from medium size municipal solid waste incinerators(MSWIs) in Korea. The concentrations of mercury, lead, arsenic, and selenium emitted from medium size MSWI stack were $2.67\;{\mu}g/Sm^3,\;0.38\;mg/Sm^3,\;1.33\;{\mu}g/Sm^3,\;0.28\;{\mu}g/Sm^3$, respectively. The concentration levels of mercury, lead, arsenic in flue gas from medium size MSW incinerator stacks selected were nearly detected under the Korea criteria level. Removal efficiencies of mercury, lead, arsenic, and selenium in waste heat boiler(WHE) and cooling tower(CT) were $90.36\%,\;69.76\%,\;43.04\%,\;40.64\%$, respectively. In general, the removal efficiencies of mercury and lead in WHE were higher than those of arsenic and selenium in WHE. Emission gas temperature reduction from waste heat boiler(WHB) and cooling tower(CT) can control mercury and lead of medium size MSWIs. To evaluate the relationship between mercury, lead, arsenic, selenium of fly ash and those of flue gas, it was carried out to correlation analysis of each metal concentration in the fly ash and in the flue gas from medium size MSWIs. From the correlation analysis, the coefficients of mercury, lead, arsenic, and selenium were 0.61, -0.38, 0.87, 0.28, respectively. The results of correlation analysis revealed that it should be highly positive to the correlation coefficients of mercury and arsenic in the fly ash and those of the flue gas emitted from medium size MSWIs. As it were, the concentrations of mercury and arsenic of flue gas from medium size MSWIs are high unless mercury and arsenic in fly ash are properly controlled in dust collection step in medium size MSWIs. It was also concluded that mercury, lead, arsenic, and selenium from MSWIs stacks could be controlled by waste heat boiler(WHE) and dust collecting step in medium size MSWIs.

• 자원리싸이클링
• /
• 제9권1호
• /
• pp.27-35
• /
• 2000

본 연구에서는 150kg/batch(승용차용 타이어 기준) 규모의 건류가스화 장치를 이용하여 페타이어와 7종류의 폐합성수지에 대한 건류가스화 실험을 폐기물 종류별 건류가스화 특성을 파악하고, 건류시간 및 1차 공기량에 따른 건류가스의 발생량과 성분 조성 등의 변화 경향등을 분석하였다. 페타이어의 경우 반응기 내부에서 연소영역과 가스화 영역의 뚜렷한 구별이 확인되었고, 건류용 1차 공기량에 대해 1.05~1.35 배의 비율로 발생되는 생성가스는 비가연성성분 이외에 CO, $H_2$, $C_1$~$C_7$ 범위의 탄화수소로 구성되었으며, 정상상태에서는 1.500~300 kcal/N$\textrm{m}^3$. 종말처리 단계에서는 250~500kcal/N$\textrm{m}^3$의 발영량을 각각 나타냈다. 페합성 수지류는 생성가스의 온도변화가 심하고, $N_2$, $CO_2$, $O_2$의 구성비율이 85%이상인 건류생성가스는 원료폐기물이 가진 열량의 10~35%에 해당하는 300~2,900kcal/N$\textrm{m}^3$ kcal/Nm의 발열량을 보유하였다.

• 유기물자원화
• /
• 제9권1호
• /
• pp.109-118
• /
• 2001

사후관리단계에 있는 폐기물매립지에서는 매립쓰레기의 안정화 정도를 실측조사하여 파악하기 어려운데 굴착조사를 하면 최종복토층이 손상되기 때문이다. 이러한 문제를 해결하고자 본 연구에서는 침출수 및 매립가스를 이용하여 매립쓰레기의 분해정도를 평가하는 방법을 개발하고 난지도매립지를 대상으로 적용해 보았다. 그 결과 난지도매립지의 매립쓰레기는 2000년까지 분해가능폐기물 기준 54%, 이분해성물질 기준 70%가 분해되었으며, 대부분이 가스상태로 전환된 것으로 분석되었다. 본 연구에서는 이러한 결과는 생화학적 안정화지수로 활용하고, 매립지의 생물학적 분해조건이 변화되었을 때 반영하는 방법도 제시하였다.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.239-246
• /
• 2016

This study aims to analyze region-specific trends in changing greenhouse gas emissions in incineration plants of local government where waste heat generated during incineration are reused for the recent five years (2009 to 2013). The greenhouse gas generated from the incineration plants is largely $CO_2$ with a small amount of $CH_4$ and $N_2O$. Most of the incineration plants operated by local government produce steam with waste heat generated from incineration to produce electricity or reuse it for hot water/heating and resident convenience. And steam in some industrial complexes is supplied to companies who require it for obtaining resources for local government or incineration plants. All incineration plants, research targets of this study, are using LNG or diesel fuel as auxiliary fuel for incinerating wastes and some of the facilities are using LFG(Landfill Gas). The calculation of greenhouse gas generated during waste incineration was according to the Local Government's Greenhouse Emissions Calculation Guideline. As a result of calculation, the total amount of greenhouse gas released from all incineration plants for five years was about $3,174,000tCO_2eq$. To look at it by year, the biggest amount was about $877,000tCO_2eq$ in 2013. To look at it by region, Gyeonggido showed the biggest amount (about $163,000tCO_2eq$ annually) and the greenhouse gas emissions per capita was the highest in Ulsan Metropolitan City(about $154kCO_2eq$ annually). As a result of greenhouse gas emissions calculation, some incineration plants showed more emissions by heat recovery than by incineration, which rather reduced the total amount of greenhouse gas emissions. For more accurate calculation of greenhouse gas emissions in the future, input data management system needs to be improved.