• Journal of Trauma and Injury
• /
• v.30 no.4
• /
• pp.126-130
• /
• 2017

Purpose: Preventable Trauma Death Rate (PTDR) using Trauma and Injury Severity Score (TRISS) has been most widely used as a quality indicator in South Korea. However, this method has a small number of deaths corresponding to the denominator. Therefore, it is difficult to check the change of quality improvement for annual mortality, and there is a disadvantage that variation is severe. Therefore, we attempted to improve the quality of the mortality evaluation by reducing the variation by applying the PARK Index (preventable major trauma death rate, PMTDR) which can increase the number of denominator significantly. And the Save score (S-score) was also examined as another quality indicator. Methods: In the PARK Index, the denominator is number of all patients who have survival probability (Ps) larger than 0.25. Numerator is the number of deaths among these. The PARK Index includes only patients with ISS >15. The S-score is calculated in the same way as the W-score, but the S-score includes only patients with ISS >15, which is a difference from the W-score. Results: PARK Index decreased annually and was 12.9 (37/287) in 2014, 9.6 (33/343) in 2015, and 7.3 (52/709) in 2016. S-score increased annually and was -0.29 in 2014, 4.21 in 2015, and 8.75 in 2016. Conclusions: PARK Index and S-score improved annually. This shows that both quality indicators are improving year by year. PARK Index (PMTDR) has 9.5-fold increase in denominator overall compared to PTDR by TRISS. The S-score used only ISS >15 patients as a denominator. Therefore, there is an advantage that the numerical value change is larger than the W-score. In addition, S-score is not affected by the ratio of major trauma patients to minor trauma patients.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.2
• /
• pp.126-137
• /
• 2003

The feasibility study of UV-disinfection system was performed for disinfection of effluent from wastewater treatment plant. Three low-pressure UV lamps of 17, 25, and 41 W were examined with various flow rates. Low-pressure UV lamps of 17W were examined with various turbidity, DOM (dissolved organic matter), and SS (suspended solid). The pilot plant was a flow-through type UV-disinfection system, and the range of exposure time varied from 5 to 40 seconds, turbidity from 0 to 40 NTU, DOM from 0 to 30 mg/L, and SS from 10 to 40 mg/L. The 41W lamp demonstrated complete disinfection showing no survival ratio in all the experimental conditions, and generally 17W and 25W lamps also showed high removal ratio over 97%. For the same UV dose (UV intensity times exposure time), high intensity-short exposure conditions showed better disinfection efficiency than low intensity-long exposure conditions. While the effects of turbidity and DOM were not apparent, the effects of SS was significant on the disinfection efficiency which indicates that SS control before UV-disinfection appears to be necessary to increase removal efficiency. Considering characteristics of effluent from existing wastewater treatment plants, cost-effectiveness, stable performance, and minimum maintenance, the flow-through type UV-disinfection system with high intensity and low-pressure lamps was thought to be a competitive disinfection system for wastewater reclamation.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.220-226
• /
• 1997

An optical intensity-type pressure sensor has been fabricated by coupling multimode optical fiber with 100 nm-Au/30 nm-NiCr/150 nm-$Si_3N_4/300 nm-SiO_2/150 nm-Si_3N_4$ optical reflection layer supported by micromachined frame-shape silicon substrate, and its characteristics was investigated. For the application of $Si_3N_4/SiO_2/Si_3N_4$ diaphragm to the optical reflection layer of the sensor, NiCr and Au films were deposited on the backside of the diaphragm by thermal evaporation , respectively, and thus optical low caused by transmission in the reflection layer could be decreased to a few percents. Dielectric diaphragms with uniform thickness were able to be also reproduced because top- and bottom-$Si_3N_4$ layer of the diaphragm could automatically stop silicon anisotropic etching. The respective pressure ranges in which the sensor showed linear optical output power-pressure characteristics were 0~126.64 kPa, 0~79. 98 kPa, and 0~46.66 kPa, and the respective pressure sensitivities of the sensor were about 20.69 nW/kPa, 26.70 nW/kPa, and 39.33 nW/kPa, for the diaphragm sizes of 3$\times$3 $\textrm{mm}^2$, 4$\times$4 $\textrm{mm}^2$, and 5$\times$5 $\textrm{mm}^2$, indicating that the sensitivity increases as diaphragm size increases.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.81-87
• /
• 2013

Agri-food garlic has been recognized as healthful because of its antibacterial, anticancer and antioxidant effects. As such, its consumption is steadily increasing. This study was conducted to amplify the healthful ingredient of garlic, allicin, using light irradiation. The following conclusions were drawn from the investigation of peeled garlic under various conditions like fluorescent lighting, color (green, yellow, blue and red) and ultraviolet light (UV-A, UV-B and UV-C). The allicin content increased most with the 15-second $0.129W/m^2$ (40 W) UV-B treatment of the garlic at a 700 mm distance from the light source. At the treatment of the garlic with 126 lx (40W) red light for 24 hours at a 700 mm distance from the light source, its allicin content increased from $15.15{\pm}0.25mg/g$ to $15.15{\pm}0.34mg/g$, for a 10-percent amplification effect. Therefore, it is believed that the healthfulness of garlic can be amplified through irradiation processing of its healthful ingredient, allicin, and the development of its processing unit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.123-126
• /
• 2003

Recently, there is a growing concern on the photovoltaic effects using organic materials. This is a phenomena which converts the solar energy into the electrical one. We have fabricated a device structure of $ITO/PEDOT:PSS/CuPc/C_{60}/BCP/AI$. The PEDOT:PSS layer is made by spin coating, and the other organic layers are made by thermal vapor deposition. By measuring the current-voltage characteristics with an illumination of light, we have obtained value of Voc=0.38V, Jsc=$0.5mA/cm^{2}$. And a fill factor and efficiency are about 0.314 and 0.083%, respectively. A 500W xenon lamp(ORIEL) is used for a light source, and the light intensity illuminated into the device was about 10mW.

• Journal of Marine Bioscience and Biotechnology
• /
• v.10 no.2
• /
• pp.73-82
• /
• 2018

Chlorella are source of valuable compounds as lipids, proteins, carbohydrates, bioactive compounds. To continuous obtain the high-value materials of Chlorella protothecoides, we performed continuous cultivation after applying milking techniques to C. protothecoides grown with culture for 7 days in optical panel bioreactor (OPBR) system. Fatty acid and lutein in extracts from pre- and post-milking of C. protothecoides were analyzed using gas chromatography and high performance liquid chromatography, respectively. C. protothecoides were rich in unsaturated fatty acids with a high content of oleic acid(C18:1), which is suitable as a biofuel feedstock. The fatty acid content in pre- and post-milking of C. protothecoides was decreased from 126.424mg/g d.w. to 119.341mg/g d.w, and the lutein content decreased from 0.258mg/g d.w. to 0.178mg/g d.w. The results of this study demonstrate the feasibility of milking C. protothecoides for production of lipids for biofuels production. It was confirmed that microalgae can continuously obtain lutein present in a trace amount through a continuous culture from milking.

• 한국약용작물학회:학술대회논문집
• /
• 2007.05a
• /
• pp.125-126
• /
• 2007

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.123-126
• /
• 2000

본 논문에서는 음성 신호 처리 IC를 제어하는 임베디드 시스템을 Micro-controller를 이용하여 설계하고 제어 프로그램을 구성/제작하여 기능을 분석한다. 선택한 음성처리용 IC 중에서 ISD2560은 내장된 EEPROM에, T6668은 외부에 D-RAM을 연결하여 음성 메시지를 저장하고 있다. PIC16F84는 음성데이터의 입출력과 저장과 재생, 초기화를 위한 회로의 동작과 순서 제어, 시작과 종료하는 메모리 번지의 생성과 같은 제어 프로그램을 수행한다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2005.10a
• /
• pp.123-126
• /
• 2005

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2007.05a
• /
• pp.123-126
• /
• 2007