• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.231-238
• /
• 2019

In this paper, we have studied how to improve the amplifiers efficiency by minimizing the combining loss when several unit power amplifiers are combined to obtain high output power. Specifically, we have developed Ka-band Spatial Combining Amplifier. The fabricated Spatial Combining Amplifier is a Ka-band 20W class SSPA, which uses a 5W class unit amplifier module 8EA designed using a GaN bare die. We also combined The unit amplifier module using 8-way spatial divider and combiner with a hybrid radial structure. The output combining loss of the fabricated spatial coupler is about 0.334dB, which is about 92.6% efficiency. In this paper, we developed a Spatial Combining Amplifier with a maximum saturation output of 10W and a power addition efficiency of over 15%. As a result, we achieved the maximum saturation output of 30W and the power addition efficiency of 19%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.658-666
• /
• 2003

In this paper, we analyzed standard and characteristic of portable microwave digital FPU(Field Pick Up) transmission system in AWGN channel environment as basis step of research about share way of M/W broadcasting relay frequency. And we analyzed system performance through simulator design. Domestic case, digitize progress about broadcasting relay is propeled. Therefore, we wish to utilize to basis data about interference evaluation and domestic broadcasting relay standardization for reassignment of M/W band broadcasting relay frequency.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.546-549
• /
• 2013

A Ka-band 6-W high power microwave monolithic integrated circuit amplifier for use in a very small aperture terminal system requiring high linearity is designed and fabricated using commercial 0.15-${\mu}m$ GaAs pHEMT technology. This three-stage amplifier, with a chip size of 22.1 $mm^2$ can achieve a saturated output power of 6 W with a 21% power-added efficiency and 15-dB small signal gain over a frequency range of 28.5 GHz to 30.5 GHz. To obtain high linearity, the amplifier employs a class-A bias and demonstrates an output third-order intercept point of greater than 43.5 dBm over the above-mentioned frequency range.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.482-485
• /
• 2007

The S-Band SSPA is front-end equipment to transmit both LRIT and HRIT to COMS. To provide the required EIRP, S-Band SSPA is designed to generate maximum 1kW power at its 1dB gain compression point (P1dB). Due to the operation for 24 hours per seven days, the verification on the performance of S-Band SSPA was performed thoroughly. This paper presents that major requirements such as maximum 1kW power, maximum -26dBc of IMD characteristic at 500W output and around -57dBc of coupling factor were verified through proposed test configuration.

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.111-115
• /
• 2010

In this paper, the electromagnetic (EM) wave absorbers using TiO2 as a dielectric material with chlorinated polyethylene (CPE) were investigated in W-band radio frequencies. We compared the relative permittivity with reflectionless curve and the absorption properties of samples containing 40 wt.%, 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% TiO2. It is possible to realize a complex relative permittivity satisfying the reflectionless condition by choosing composition ratio of TiO2. The optimized composition ratio of TiO2 for the maximum absorption property is about 70 wt.%. As a result, we have confirmed the realization of an EM wave absorber with a high absorption property in W-band radio frequencies.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.408-411
• /
• 2021

This paper presents a new reflectarray antenna capable with 1-bit switchable capability for W-band beamforming network. The proposed antenna has been optimized using two unit-cells with sizes of 1.0 mm and 1.3 mm to form a total number of 193 radiating elements on a square aperture surface of length 30 mm. These radiating elements are spaced 0.5 wavelengths apart and fed by a 15 dBi pyramidal horn antenna as the feed antenna placed 53 mm away from the aperture center. The proposed reflectarray achieves a realized peak gain of 22.52 dBi, a half-power beamwidth of 5.1° in both E- and H-planes at the test frequency of 80 GHz and operates over a wide bandwidth from 74 GHz to 90 GHz.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.556-561
• /
• 2016

This paper describes implementation of a 13.56 MHz, 5 kW RF high power generator for ISM band applications. This RF generator consists of four LDMOS modules of 1.25kW class-AB push-pull power amplifier with drive amplifier and its outputs are combined by using Wilkinson type transmission-line transformers. Its generator has a high efficiency and output power better than linearity. In order to discharge power transistor heats, we used on water cooled copper plate. Also, these have a composite circuit of combiner and low-pass filter and safety circuit to detector over and reflected power. The RF generator has achieved a efficiency of 79 % at 5.33 kW of saturated power level experimentally.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1107-1113
• /
• 2009

In this paper, the design and implementation of K-Band frequency dividers using 130 nm CMOS process are presented. A Miller frequency divider is presented, which realizes a division range from 20 to 25 GHz with 7.2 mW power consumption from 1.2 V supply. The layout size of the core circuit is about $315{\times}246\;um^2$. In addition, a CML frequency divider which divides the output signal of the Miller frequency divider is also presented, which realizes a division range from 8.5 to 13 GHz with 5.7 mW power consumption. The layout size of the CML core is about $91{\times}98\;um^2$. Cascading the Miller and CML frequency dividers, we confirmed the divide-by-4 operation for the input signal from 20 to 25 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.22-29
• /
• 2009

In this paper, we developed the 200-Watts SSPA(Solid State Power Amplifier) for the X-band pulse compression solid state radar. The developed X-band SSPA is consists of 3-stage CSA(Corporate Structured Amplifier) modules in pre-amplifier stage, driver-amplifier stage and main-power amplifier stage. The main-power amplifier stage of SSPA designed by balanced type using GaN HEMT with enough power and gain to generate power more than 200-Watts in X-band. The developed SSPA has performance with more than total gain 59dB and output power 200-Watts in condition of frequency range 9.2-9.6GHz, pulse period 1msec, pulse width 100usec and duty cycle 10%. The developed SSPA in this paper can apply to high quality solid state radar system with pulse compression technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.861-868
• /
• 2017

Near band infrared imaging technique has adopted for imaging EL2 and shallow level distributions in undoped semi-insulating LEC GaAs. This technique, which relies on the mapping of near bandgap infrared transmission, is both rapid and non-destructive. Until now no quantitative analysis has been reported for near band edge region which gives the reverse contrast on EL2 absorption images. This paper presents the spectral, spatial and temperature dependence of photoquenching forward and inverse mechanism in the band edge domain for cells and walls and for direct and inverted contrast conditions during transitory regimes. The difference in the threshold for the EL2w and EL2b defects could be attributed to the contribution of a different electrical assistance due to a different species of impurities. Quantitative analysis results show an increased density of EL2w and a small reduction of EL2b in the region of the walls where there is a high density of dislocations.