• Title/Summary/Keyword: W Band

Search Result 1,130, Processing Time 0.035 seconds

Design of V-Band Differential Low Noise Amplifier Using 65-nm CMOS (65-nm CMOS 공정을 이용한 V-Band 차동 저잡음 증폭기 설계)

  • Kim, Dong-Wook;Seo, Hyun-Woo;Kim, Jun-Seong;Kim, Byung-Sung
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.10
    • /
    • pp.832-835
    • /
    • 2017
  • In this paper, V-band differential low noise amplifier(LNA) using 65-nm CMOS process for high speed wireless data communication is presented. The LNA is composed of 3-stage common-source differential amplifiers with neutralization of feedback capacitances using MOS capacitors and impedance matching utilizing transformers. The fabricated LNA has a peak gain of 23 dB at 63 GHz and 3 dB bandwidth of 6 GHz. The chip area of LNA is $0.3mm^2$ and the LNA consumes 32 mW DC power from 1.2 V supply voltage.

Development of UWB Sinuous Antenna with Dielectric Lens for 3~6 GHz Band Application (유전체 렌즈를 가진 3~6GHz대용 UWB 시뉴어스 안테나 개발)

  • Lee, Dong Real
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.15 no.6
    • /
    • pp.239-244
    • /
    • 2015
  • Recently, Impulse radars using UWB technologies are widely use for measuring distance, or for transmitting uncompressed high resolution videos. However, since the UWB band spans over octave bands, it is not easy to design such a system. Wide band impedance matching is required for antennas and other RF area. In this study, we designed and fabricated sinuous antenna for 3~6 GHz octave band application. We also designed and attached a dielectric lens to improved the directional gain of the antenna. The gain of the antenna was 6~10 dBi. The dielectric lens attached sinuous antenna was used to transmit HD video data. The maximum reach distance was 90 meter with 10mW power.

Analysis of Optimum Impedance for X-Band GaN HEMT using Load-Pull (로드-풀을 이용한 X-Band GaN HEMT의 최적 임피던스 분석)

  • Kim, Min-Soo;Rhee, Young-Chul
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.6 no.5
    • /
    • pp.621-627
    • /
    • 2011
  • In this paper, we analysed performance for on-wafer GaN HEMT using load-pull in X-band, and studied optimum impedance point based on analysis result. We suggested method of optimum performance device by analysis of optimum impedance for solid state device on-wafer condition before packaging. The measured device is gate length 0.25um, and gate width is 400um, 800um. device 400um is performed $P_{sat}$=33.16dBm, PAE=67.36%, Gain=15.16dBm, and device 800um is performed $P_{sat}$=35.91dBm, PAE=69.23%, Gain=14.87dBm.

Out-of-Band Emission Mask Analysis of Terrestrial Low Power DMB Repeater (지상파 DMB 소출력 중계기의 대역외발사강도 분석)

  • Her, Young-Tae;Kim, Kwang-Ui;Lee, Chun-Ho;Lee, Hee-Sung;Kwon, Won-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.8B
    • /
    • pp.1188-1196
    • /
    • 2010
  • In this paper, worldwide standards and regulations on in-band/out-of-band emission characteristics of DMB broadcasting equipments are reviewed, and emission mask requirements of terrestrial low power DMB repeater under 10mW/MHz are analyzed. Out-of-band emission mask drafts suitable for single/multiple block low power repeaters are proposed. Validity and usefulness of the proposed drafts is evaluated and verified in the several experiments. Using the proposed standard, small-sized and cost-effective DMB repeater can be easily implemented to broaden DMB broadcasting coverage by reducing weak signal areas.

Technical analysis of frequency reallocation to FM broadcasting link system for effective use in 900 MHz band (900MHz 대역의 효율적 이용을 위한 FM 방송 링크 시스템 주파수의 재배치에 대한 기술적 분석)

  • Suh, Kyoung-Whoan;Lee, Joo-Hwan
    • Journal of Broadcast Engineering
    • /
    • v.15 no.1
    • /
    • pp.89-98
    • /
    • 2010
  • In this paper, the technical analyzing methodology has been suggested to preserve the same transmission quality of a M/W system used for FM broadcasting link after the frequency reallocation. The simulation was also performed for the actual M/W system operating in each frequency band, and its results were evaluated in terms of an availability based upon a fade margin. It was confirmed that only if the relative fade margin of more than 2.6 dB at 1700 MHz is provided, the equivalent service quality may be obtained regardless of the frequency reallocation. The suggested method will be expected to be widely used for accessing service quality of the M/W system concerned with the frequency reallocation.

Comparison the Variability of SMOS L-band and AMSR2 C-band Soil Moisture Data (SMOS L-band와 AMSR2 C-band 토양수분 자료의 변화특성 비교)

  • Kim, Myojeong;Kim, Gwangseob
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.513-513
    • /
    • 2015
  • 정확한 유역 토양수분 정보는 홍수 예측의 정도를 크게 향상시키므로 공간 토양수분 정보를 획득하기 위하여 선진국에서는 위성 영상을 활용하여 토양수분을 관측하고 있다. 본 연구에서는 유럽우주기구 ESA(European Space Agency)에서 운영하는 SMOS(Soil Moisture and Ocean Salinity) L-band 토양수분 관측치와 일본 우주항공 연구개발 기구 JAXA(Japan Aerospace Exploration Agency)에서 운영하는 GCOM-W1 위성의 AMSR2(Advanced Microwave Scanning Radiometer 2) C-band 토양수분 자료를 비교 분석하였다. SMOS 토양수분, AMSR2 토양수분을 기상청 농업관측관서의 지상 관측 토양수분 자료와 비교한 그래프는 다음과 같다(Fig. 1). 상대적으로 깊은 관측심으로 인한 장점을 가짐에도 불구하고 RFI로 인한 L-band 토양수분 자료의 시공간 관측율이 C-band 토양수분자료에 비하여 낮아 활용성이 낮다. AMSR2 자료는 여름철을 제외한 모든 계절에 과소 추정하는 단점을 보이며 실제적 활용을 위해 지상자료와의 편이보정 과정이 필수적이라 판단된다.

  • PDF

Low Conversion Loss and High Isolation 94 GHz MHEMT Mixer Using Micro-machined Ring Coupler (마이크로 머시닝 링 커플러를 사용한 낮은 변환 손실 및 높은 격리 특성의 94 GHz MHEMT 믹서)

  • An Dan;Kim Sung-Chan;Park Jung-Dong;Lee Mun-Kyo;Lee Bok-Hyung;Park Hyun-Chang;Shin Dong-Hoong;Rhee Jin-Koo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.6 s.348
    • /
    • pp.46-52
    • /
    • 2006
  • We report on a high performance 94 GHz MMIC resistive mixer using 70-nm metamorphic high electron mobility transistor (MHEMT) and micro-machined W-band ring coupler. A novel 3-dimensional structure of resistive mixer was proposed in this work, and the ring coupler with the surface micro-machined dielectric-supported air-gap microstrip line (DAMLs) structure was used for high LO-RF isolation. The fabricated mixer showed an excellent LO-RF isolation of -29.3 dB and a low conversion loss of 8.9 dB at 94 GHz. To our knowledge, compared to previously reported W-band mixers, the proposed MHEMT-based resistive mixer using micro-machined ring coupler has shown superior LO-RF isolation as well as similar conversion loss.

Design of the Broadband PIFA with Multi-Band for SAR Reduction (다중대역을 가지는 SAR 저감용 광대역 PIFA 설계)

  • Choi Donggeun;Shin Hosub;Kim Nam;Kim Yongki
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.1 s.92
    • /
    • pp.66-77
    • /
    • 2005
  • This paper proposed a novel broadband PIFA(Planar Inverted-F Antenna) for IMT-2000/WLAN/DMB terminal. Two branch lines for meander line were utilized in order to improve the characteristics of PIFA which usually has a narrow band. The shorting strip between the ground plane and meander-type radiation elements were used in order to minimize the size of the antenna. The -10 dB return loss bandwidth of a realized antenna was $38.2{\%}$(1.84~2.71 GHz), which contains the broadband bandwidth with triple band. And the simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the triple band PIFA mounted on folder-type handsets were analyzed and discussed. As a result, the measured 1 g and 10 g averaged peak SARs of PIFA were similar with the simulated values and were lower than the 1.6 W/kg and 2 W/kg of 1 g and 10 g averaged peak SAR limits.

Design and Fabrication of X-Band GaN TRM for a Radar (레이더용 X대역 GaN 반도체 송수신기 설계 및 제작)

  • Lim, Jae-Hwan;Jin, Hyung-Suk;Ryu, Seong-Hyun;Park, Jong-Sun;Kim, Tae-Hun;Lim, Duck-Hee
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.25 no.2
    • /
    • pp.172-182
    • /
    • 2014
  • In this paper, is is presented the result of design and fabrication for X band T/R module using in active array radar. The high power RF circuit was fabricated using GaN element, so that high power and high efficiency was fulfilled comparing with the previous T/R module that have under 50 W output power for X band. Designed X band T/R module demonstrated 200 W(53 dBm) peak power, 20 us pulse width with 0.4 dB pulse droop and 20 % duty cycle. And it has characteristics of 26 dB receive gain and 4.5 dB noise figure. The structure was applied to prevent serious damage of receive path and GaN HPA by transmitting power during trasmit time of a pulse radar.

A Design of Wideband Monopulse Comparator for W-Band mm-Wave Seeker Applications (W-대역 밀리미터파 탐색기용 광대역 모노펄스 비교기 설계)

  • Kim, Dong-Yeon;Lim, Youngjoon;Jung, Chae-Hyun;Park, Chang-Hyun;Nam, Sangwook
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.2
    • /
    • pp.224-227
    • /
    • 2016
  • This paper proposes a design of W-band mm-wave wideband monopulse comparator using waveguide structure for applications. The main idea of proposed design is to combine a self-compensating phase shifter on $90^{\circ}$ hybrid for wideband $180^{\circ}$ hybrid. Using multiple conventional phase shifters, because of their narrow-band characteristics, tends to restrict working bandwidth of system including antennas. Proposed comparator could relieve the problem since it applies the self-compensating phase shifter. The comparator has waveguide structure so it shows excellent characteristic in loss. It also show wideband characteristic in amplitude and phase response between ports.