• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.647-653
• /
• 2016

In the paper, durability performance in FA (Fly Ash) blended concrete is evaluated considering replacement of FA with TDFA (Tire Derived Fuel Ash) from 3.0% to 12%. TDFA is a byproduct from combustion process in thermal power plant, where chopped rubber is mixed for boiling efficiency. This is the 1st study on application of TDFA to concrete as mineral admixture. For the work, concrete samples containing 0.5 of w/b (water to binder) ratio and 20% replacement ratio of FA are prepared. With replacing FA with TDFA to 12%, durability performance is evaluated regarding compressive strength, carbonation, chloride diffusion, and porosity. The results of compressive strength, carbonation, and porosity tests show reasonable improvement in durability performance to 12% replacement of TDFA. In particular, clear decreasing diffusion coefficient is observed with increasing TDFA replacement due to its packing effect. Concrete containing TDFA can be effective for durability improvement when workability is satisfied in mixing stage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.889-892
• /
• 2008

This study, having combined and displaced fly ash known as admixture material that delays hydration reaction with coarse particle cement("CC" hereinafter) collected in particle classification method during ordinary portland cement("OPC" hereinafter), reviewed the hydration heat characteristics affecting the concrete. To reduce hydration heat, the study plain-mixed which used 100% OPC for WB 50% level 1, displaced CC at level 3 of 25%, 50% and 75% for OPC, and by displacing FA with admixture material at level 5 of 0%, 10%, 20%, 30% and 40%, experimented totally 16 batches. As a result of experiment, in the case of flow, the more CC displacement rate increased, the more it tended to decrease, and the more FA displacement rate increased, the more it decreased. As for simple adiabatic temperature rise by the CC and FA displacement rates, it decreased as displacement rate increased, and particularly in the case of FA40, temperature rise amount, $5.8{\sim}7.4^{\circ}C$, was very low. Compressive strength decreased in proportion to displacement rate, however strength reduction increment was shown to decrease with age progress.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.433-436
• /
• 2017

SIESTA를 이용하여 GaSe 단일층에서 금속 원자(Ga)를 전이금속 원자(W)로 치환하였을 때($W_{Ga}$)의 구조 deformation, 에너지 안정성, 전자구조와 자성을 확인하였다. 그 결과, 구조가 바뀌면서 평면에 수직한 방향으로 구조 변형이 나타났고, $W_{Ga}$에서 W의 NN는 Se이 되었다. Clean surface만큼 $W_{Ga}$도 안정된 구조임을 알 수 있었다. $W_{Ga}$에서 W에 의한 defect states가 up, down 6개씩 split되어 나타났으며, ${\Gamma}$ point에서 degenerated 경향을 보였다. 또한 W에 의한 magnetic moment는 $1{\mu}_B$인 것을 확인하였다. Defect states는 degenerated $d_{yz}$, $d_{zx}$ orbital character, degenerated $d_{xy}$, $dx^2-y^2$ orbital character, defect states는 $d_z{^2}$ orbital character을 띠는 것으로 나뉘었고, 이에 따라 에너지가 함께 높아졌다.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.557-564
• /
• 2021

Sr_0.92Y_0.08Ti_1-xV_xO_3-δ (SYTV) with perovskite structure was investigated as an alternative anode to utilize H₂S containing fuels in solid oxide fuel cells. To improve the electrochemical performance of Sr_0.92Y_0.08TiO_3-δ (SYT), vanadium(V) was substituted to titanium(Ti) at the B-site of the SYT perovskites. The SYTV synthesized by the Pechini method was chemically compatible with the YSZ electrolyte without additional by-products formation under the cell fabricating conditions. As increasing V substitution amounts, the oxygen vacancies increased, resulting to increasing ionic conductivity of the anode. The cell performance in pure H₂ at 850 ℃ is 19.30 mW/cm² and 34.87 mW/cm² for a 1 mol.% and 7 mol.% of V substituted anodes, respectively. The cell performance using H₂ fuel containing 1000 ppm of H₂S at 850 ℃ was 23.37 mW/cm² and 73.11 mW/cm² for a 1 mol.% and 7 mol.% of V substituted anodes, respectively.

• Applied Biological Chemistry
• /
• v.36 no.5
• /
• pp.381-386
• /
• 1993

New twenty five Imazethapyr derivatives, [2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin -2-yl)-3-(N-methyl-N-X(sub.)-phenylaminooxoacetyl)-5-methylpyridine] were synthesized. and The quantitative structure activity relationships (QSARs) between their post-emergence herbicidal activity$(pI_{50})$ values in vivo against Barnyard grass (Echinochloa crus-galli) and physicochemical parameters of substituents(X) of 3-(N-methyl-N-X(sub.)-phenylaminooxoacetyl) group have been studied. From the basis on the findings, in case of post-emergence, the activities were dependent on the steric constant$(E_s<0)$ and electron donating $(\sigma<0)$ effect by subsitituents(X) of 3-(N-methyl-N-X(sub.)phenylaminooxoacetyl) group. Therefore, The most effective compound,15 (4-t-butyl group) and 20 (3,5-dimethyl group) were examined in this study. And the conditions on the compounds predicted to show higher herbicidal activity were also discussed.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.516-521
• /
• 1994

New seventeen imazapyr derivatives, 2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-3-(N-methyl-N-X(sub.)-phenylaminooxoacetyl)pyridine, 6 were synthesized and their pre-emergence herbicidal activity$(pI_{50})$ in vivo against Corn (Zea mays L.) and Pigweed (Amaranthus viridis L.) were studied by the pot test under paddly conditions. Quantitative structure activity relationships (QSARs) were analyzed using the physicochemical parameters of substituent(X) on the phenyl ring of 3-(N-methyl-N-X(sub.)-phenylaminooxoacetyl) group and regression analysis. The herbicidal activities were related to the steric effect of X-substituent. The effect was rationalized by paraholic function of MR and $L_1$, where the optimal values were MR=5.56 (Zea mays L.) and $L_1=3.34\;{{\AA}}$ (Amaranthus viridis L.). Among them, 2,5-difluoro substituted compound, 6i showed good herbicidal activity against Pigweed with excellent tolerance to Corn.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.553-556
• /
• 2008

This study analyzed is to investigate the effect of the combined use of fly ash and coarse particle cement(RCC) collected in particle classification method during ordinary portland cement(OPC) on the fundamental properties of concrete. Totally 16 batches of the concrete was fabricated vary the contends of FA and RCC. As results of experiment, in the case of flow, the more the contents of RCC, the larger the flow. And the more the contents of FA displacement rate increased, the less the flow. As for simple adiabatic temperature rise due to the RCC and FA contents, it decreased with the increase of them. And particularly in the case of RCC 30% + FA 30%, temperature rise amount, was very low. Compressive strength decreased in proportion to increase of the contents of FA and RCC. And strength ratio of the concrete incorporating FA and RCC for plain concrete at 28 days was 88%${\sim}$98%, which was relatively good results.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.357-365
• /
• 1989

The positional parameters of framework atoms, cations, and water molecules in hydrated and dehydrated $Mg_4Na_4-A$, $Ca_6-A$, $Zn_5Na_2-A$ and $Co_4Na_4-A$ were determined by the optimization technique using some potential energy functions and VAIOA optimization program. Upon dehydration, cations in hydrated states move toward the framework oxygens of 6 rings. Frameworks of fully dehydrated zeolite A are more stable than those of fully dehydrated divalent cation exchanged Zeolite A. There are three different kinds of water molecules in divalent cation exchanged Zeolite A; W(III) (water molecules having hydrogen bonds), W(II) (water molecules associated with $Na^+$ ions), and W(I) (water molecules associated with divalent cations). Three different DTA endothermic peaks were observed corresponding to the dehydration of three different kinds of water molecules in divalent cation exchanged Zeolite A.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.36-42
• /
• 2018

GGBFS(Ground Granulated Blast Furnace Slag)-replacement is very effective for improving resistance to chloride attack and this can induce a long service life for RC(Reinforced Concrete) structures exposed to chlorides. In the work, the design parameters such as cover depth, surface chloride content, critical chloride content, and replacement ratio of GGBFS are considered, and optimum replacement ratio of GGBFS are derived with intended service life. The changes of surface chloride content and cover depth show 3.16~3.38 and 3.02~3.34 times of service life variation, which are most influencing parameters. Critical chloride content shows 1.53~1.57 times of service life variation regardless of w/b(Water to Binder) ratios. In the case of surface chloride content $18.0kg/m^3$, the most severe condition, cover depth over 70 mm and GGBFS replacement ratio over 42% are required with concrete containing w/b ratio under 0.42 for 100 years of intended service life. The condition of $13.0kg/m^3$, GGBFS replacement over 35% is required. For reasonable durability design, quantitative exterior condition and critical chloride content should be determined, and the criteria in Domestic Specification is evaluated to be conservative.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.253-258
• /
• 1997

The characteristics of crystal structure and phase transition with dopants ($Nb_2O_5$= 0.1~0.4 mol% and $Y_2O_3$ : 0.2~0.4 mol%) on the PTCR $BaTiO_3$ system were investigated. In the case of $Nb_2O_5$ additive, the lattice parameter of PTCR $BaTiO_3$ was changed linearly with the increasement of $Nb_2O_5$ which substituted B-site of BaTiO$_3$ and the lattice parameter of c-axis decreased abruptly at 0.3 mol%. These phenonmena were assumed to originate from the distortion of octahedron and we could confirm that the change of lattice parameter accorded with the characteristics of the phase transition temperature. $Y^{3+}$ ions substituted both of A- and B-site until the 0.3 mol% addition, but $Y^{3+}$ substitution preferred A- to B-site above 0.3 mol%. This was affirmed by the variation ,of lattice parameter and the characteristics of phase transition. It also was found that $Y^{3+}$ions in the A-site substituted both of $Ba^{2＋}$ and $Ca^{2＋}$ ions with equal ratio by Rietveld method.