• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.205-210
• /
• 2001

Cubic equations of state with two temperature dependent parameters are suggested and optimized using ASHRAE data for methane, propane, carbon dioxide, R-32 and R-134a. Appropriate simple functional forms are assumed for the temperature dependent parameters. The equations tested are Martin, Fuller, Harmens-Knapp, Schmidt-Wenzel. Among them modified Schmidt-Wenzel equation of state appears to be the choice for calculation of saturation properties such as vapor pressures, saturated liquid volumes, and saturated vapor volumes with an average absolute deviation of about one percent over the entire region excluding; the near cirtical.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.271-278
• /
• 2020

The investigation into a full-scale 27 m high, by 6 m wide, thermosyphon loop. The simulation model is based on a one-dimensional axially-symmetrical control volume approach, where the loop is divided into a series of discreet control volumes. The three conservation equations, namely, mass, momentum and energy, were applied to these control volumes and solved with an explicit numerical method. The flow is assumed to be quasi-static, implying that the mass-flow rate changes over time. However, at any instant in time the mass-flow rate is constant around the loop. The boussinesq approximation was invoked, and a reasonable correlation between the experimental and theoretical results was obtained. Experimental results are presented and the flow regimes of the working fluid inside the loop identified. The results indicate that a series of such thermosyphon loops can be used as a cavity cooling system and that the one-dimensional theoretical model can predict the internal temperature and mass-flow rate of the thermosyphon loop.

• Journal of Biomedical Engineering Research
• /
• v.11 no.2
• /
• pp.195-202
• /
• 1990

The hypothesis of asymmetric resistance to explain the phenomenon of lung hyperinflation (LHI) during hlgh frequency ventilation (HFV) was quantitatively studied. LHI was predicted by modeling the ism-volume pressure-flow (IVPF) data from 5 human subjects using the empirical Rohrer's equation. Non-steadiness during HFV was compensated by em- ploying recently proposed volume-frequency diagram. Tidal volume and ventilation frequency were 100 ml and 20 Hz, respectively. Airflow pattern was a symmetric sinusoid. The predic- tion results of mean pressure drop across the airways were averaged for those 5 subjects, and compared with zero by one-sided student's t-test. A marginally significant (P<0.1) increase in mean pressure drop was observed during HFV at low lung volumes (below FRC) , which could increase mean lung volume up to one liter When the lung volume was above FRC, no significant LHI (P >0.25) was resulted. LHI seemed to be inversely related to the lung volume. These results recommend to clinically apply HFV only at lung volumes above FRC.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.183-190
• /
• 2017

PURPOSES : The objective of this study is to establish the traffic volume-based warrants of right-turn lanes at unsignalized intersections and to introduce a risk probability methodology based on the warrants. METHODS : In this study, a risk probability of a potential rear-end collision is applied between a right-turn vehicle and the immediately following through vehicle. Using the shifted negative exponential model and the compound probability theorem, the risk probability can be expressed as the function of directional volumes and the percentage of right-turns for a two-lane and four-lane highway, respectively. RESULTS : Based on the risk probablity, guidelines for installing right-turn lanes on two-lane and four-lane highways were developed. The risk probability also showed rationality by comparing with right-turn same-direction conflicts observed in-situ. CONCLUSIONS : The results of our study define the total approaching volumes to encourage a right-turn lane as a function of operating speed, percentage of right-turn, and number of lanes.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.80-92
• /
• 1998

A third-order simulation model of a Vuilleumier{VM) heat pump has been developed. This model takes into account the major losses such as the heat conduction losses through regenerators and displacers, the pumping losses and the wall-to-gas heat transfer losses in active volumes, in addition to the heat exchanger and regenerator losses. The working volume was divided into 12 control volumes and the conservation equations of mass and energy were applied to each control volume. Pressure drops were considered in regenerators only. Thermodynamic behavior of the working gas in a VM heat pump was investigated and effects of the major losses and operating conditions on the performance of a VM heat pump were shown.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.953-956
• /
• 2002

Excess molar volumes (Vm E ) of binary liquid mixtures: xC6H5CH3 + (1-x1)CH3CN or + (1-x1)C6H5NO2, or + (1-x1)C2H5NO2 have been determined as a function of mole fraction of C6H5CH3 (x) at a temperature of 303.15 K over a entire range of composition. The densities of the binary liquid mixtures were determined by pycnometrically. The VmE values of the mixtures have been found to be negative over the whole composition in order of C6H5CH3 + C6H5NO2, < C6H5CH3 + CH3CN, and < C6H5CH3 + C2H5NO2. The negative magnitude of VmE suggests the presence of intermolecular interaction in the three binary liquid mixtures.

• Journal of Biomedical Engineering Research
• /
• v.13 no.3
• /
• pp.209-216
• /
• 1992

A new experimental technique is proposed to localize the flow limiting segment(FLS) during forced expiration. The present technique is based on the pressure drip across FLS and a consequent change in airway resistance, which can provide an accurate and objective location of FLS. During forced expiratory maneuver artificially induced by a strong negative pressure (-100mmHg) applied at the trachea in an anesthetized open chest dog, airway resistance( R) was calculated from air flow and airway pres- sure signals at various airway locations and lung volumes, At the lung volumes above 10 % VC, FLS located in the trachea 6cm lower from the larynx. With the lung volume decreased below 8% VC, FLS jumped upstream to End-3rd generation of the airway. These results were similar with the previous reports from excised dog lungs, which demonstrated the validity of the present technique. Since the present technique provides a more objective measure of FLS location, it would be useful in future studies of expiratory flow limitation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.13-16
• /
• 2000

In fuzzy expert systems or database systems that have huge volumes of fuzzy data or large fuzzy rules, the inference time is much increased. Therefore, a high performance parallel fuzzy computing environment is needed. In this paper, we propose a parallel fuzzy inference mechanism in parallel computing environment. In this, fuzzy rules are distributed and executed simultaneously. The ONE_TO_ALL algorithm is used to broadcast the fuzzy input vector to the all nodes. The results of the MIN/MAX operations are transferred to the output processor by the ALL_TO_ONE algorithm. By parallel processing of fuzzy rules or data, the parallel fuzzy inference algorithm extracts effective parallel ism and achieves a good speed factor.

• Journal of the Chungcheong Mathematical Society
• /
• v.31 no.4
• /
• pp.369-379
• /
• 2018

Let ${\mathbb{H}}_3$ be the 3-dimensional Heisenberg group equipped with a left-invariant metric. In this paper we calculate the volumes of geodesic balls in ${\mathbb{H}}_3$. Let $B_e(R)$ be the geodesic ball with center e (the identity of ${\mathbb{H}}_3$) and radius R in ${\mathbb{H}}_3$. Then, the volume of $B_e(R)$ is given by $$Vol(B_e(R))={\frac{\pi}{6}}\{-16R+(R^2+6){\sin}\;R+(R^3+10R){\cos}\;R+(R^4+12R^2){\int\nolimits_0^R}\;{\frac{{\sin}\;t}{t}}dt\}$$.

• Journal of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.195-198
• /
• 1969

Determination of partial molal volumes of anilinium chloride isopropanol-water mixtures at 30.00$^{\circ}$showed a distinct minimum at 0.20 mole fraction isopropanol. This was interpreted as maximum in electrostriction effect and minimum in water structure. The depth in $\bar{V}^{\circ}$for alcohol-water mixtures was in the order MeOH > i-PrOH > EtOH, which indicated the importance of microscopic structure around ions.