• 디지털융복합연구
• /
• 제19권12호
• /
• pp.377-382
• /
• 2021

산림자원관리의 선진화를 위해서는 산림 관련 산업 종사자의 고령화와 인력 중심의 현장조사 체계 등의 문제해결이 필요하다. 이에 본 연구에서는 과학적인 산림자원관리를 위해 최신 기술이 적용된 해외 산림공간정보 구축 및 활용동향을 조사하여 국내 적용 방안을 파악하고자 하였다. 해외에서는 산림공간정보 구축 및 활용에 사진측량 및 LiDAR 기술이 활용되고 있었다. 사진측량의 경우 식생의 체적, 흉고직경, 수고 측정 등에 이용되었으며, LiDAR는 흉고직경 및 수고 측정에 적용된 사례가 있었다. 해외 사례에 대한 분석을 통해 사진측량 및 LiDAR를 활용한 산림공간정보 구축방안을 파악하였으며, LiDAR가 사진측량에 비해 높은 정확도를 나타냄을 알 수 있었다. 향후 다양한 LiDAR 센서를 이용한 산림공간정보의 구축을 수행하고, 정확도 및 작업 효율에 대한 분석이 이루어진다면 국내 산림공간정보 구축에 있어 새로운 기술의 활용 가능성을 제시할 수 있을 것이다.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.661-669
• /
• 2021

종래 우주용 전장품 개발과정에서는 발사진동환경에 대한 탑재 전자소자 솔더 접합부의 피로수명 보장을 위해 기판 상에 보강재를 적용하여 강성을 증가시킴으로써 기판의 동적거동을 최소화하였다. 그러나 종래의 설계는 전장품의 부피 및 무게의 증가를 야기하여 소형/경량화 설계에 한계를 갖는다. 선행 연구에서 제안된 점탄성 테이프 기반 고댐핑 적층형 전자기판은 굽힘변위 저감을 통한 소자의 피로수명 연장에 효과적임을 입증하였으나 고댐핑 부여를 위한 적층구조가 기판에 직접 장착되는 관계로 소자 실장 공간의 효율이 저하되는 한계를 지닌다. 본 연구에서는 전장품 소형/경량/고집적화 설계 구현을 위해 일반 금속 대비 높은 댐핑과 복원 특성을 갖는 초탄성 형상기억합금에 점탄성 테이프를 적용한 적층구조의 초탄성 형상기억합금 보강재 기반 고댐핑 전자기판을 제안하였다. 제안 기판의 기본특성 파악을 위해 정하중시험 및 자유진동시험을 수행하였으며, 랜덤진동시험을 통해 진동환경 하 고댐핑 특성 및 설계 유효성을 입증하였다.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.79-86
• /
• 2019

In order to measure the filtration characteristics of a cotton ball shape filter, the experiments of suspended solids(SS) surrogate material selection and filtration performance have been carried out in this study. Between the two materials of powdered activated carbon(PAC) and powdered red-clay, PAC is more suitable surrogate material in terms of experimental criteria and particle size distribution in the non-point source pollutants removal system. As a result of the filtration experiments with the cotton ball shape filter, the initial headloss was about 8 cm, and the headloss slightly increased over filtration time. The Kozeny-Carman equation was used to analyze the changes of pressure and porosity during the filtration. The initial porosity was calculated as 0.945 and it decreased to 0.936 at the end of design filtration time. As the filtration continued, the SS concentration of the filtered water gradually increased and the SS removal rate gradually decreased. When the SS target removal efficiency is assumed to be 80%, the cumulative SS removal capacity is expected as $28.8kg/m^2$. This means the volume loading rate of the cotton ball shape filter can be $115m^3/m^2$ when the typical SS concentration of non-point source water pollution is assumed as 250 mg/L.

• 한국정보기술학회논문지
• /
• 제16권12호
• /
• pp.1-11
• /
• 2018

최근 온라인 쇼핑 유통시장의 규모는 지속적이고 빠르게 성장하고 있기 때문에 고객 행동평가분석을 통한 맞춤형 쇼핑서비스가 매우 중요해지고 있다. 하지만 기존의 분석 방식은 소비자의 프로파일 및 행동에 대한 분석 데이터만을 제공하고, 디스크기반 마이닝 탐사로 인해 실시간 분석의 한계가 존재했다. 그러므로 실시간 처리 및 분석이 필요한 웹 서비스와 같은 분야에 기존 방식을 적용하기에는 정확성의 문제와 시스템 성능 문제가 존재한다. 본 연구에서는 실시간으로 발생되는 웹 클릭 로그 스트림을 분석하고 특정 상품에 대한 집중도를 분석하여 상품 구매 의지가 있는 관심고객을 찾아내며, 이를 바탕으로 전체 고객 대상이 아닌 관심고객 중심의 상품 프로모션을 진행할 수 있는 시스템을 구현하고 이들의 효율성과 정확성을 검증한다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.179-188
• /
• 2018

Recently, blockchain technology has been recognized as one of the most important issues for the 4th Industrial Revolution which can be represented by Artificial Intelligence and Internet of Things. Cryptocurrency, named Bitcoin, was the first successful implementation of blockchain, and it triggered the emergence of various cryptocurrencies. In addition, blockchain technology has been applied to various applications such as finance, healthcare, manufacturing, logistics as well as public services. Distributed consensus algorithm is an essential component in blockchain, and it enables all nodes belonging to blockchain network to make an agreement, which means all nodes have the same information. For example, Bitcoin uses a consensus algorithm called Proof-of-Work (PoW) that gives possession of block generation based on the computational volume committed by nodes. However, energy consumption for block generation in PoW has drastically increased due to the growth of computational performance to prove the possession of block. Although many other distributed consensus algorithms including Proof-of-Stake are suggested, they have their own advantages and limitations, and new research works should be proposed to overcome these limitations. For doing this, above all things, we need to establish an evaluation method existing distributed consensus algorithms. Based on this motivation, in this work, we suggest and analyze assessment items by classifying them as efficiency and safety perspectives for investigating existing distributed consensus algorithms. Furthermore, we suggest new assessment criteria and their implementation methods, which can be used for a baseline for improving performance of existing distributed consensus algorithms and designing new consensus algorithm in future.

• Structural Engineering and Mechanics
• /
• 제69권4호
• /
• pp.439-455
• /
• 2019

This research deals with thermo-electro-mechanical buckling analysis of the sandwich nano-beams with face-sheets made of functionally graded carbon nano-tubes reinforcement composite (FG-CNTRC) based on the nonlocal strain gradient elasticity theory (NSGET) considering various higher-order shear deformation beam theories (HSDBT). The sandwich nano-beam with FG-CNTRC face-sheets is subjected to thermal and electrical loads while is resting on Pasternak's foundation. It is assumed that the material properties of the face-sheets change continuously along the thickness direction according to different patterns for CNTs distribution. In order to include coupling of strain and electrical field in equation of motion, the nonlocal non-classical nano-beam model contains piezoelectric effect. The governing equations of motion are derived using Hamilton principle based on HSDBTs and NSGET. The differential quadrature method (DQM) is used to calculate the mechanical buckling loads of sandwich nano-beam as well as critical voltage and temperature rising. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various HSDBTs, length scale parameter (strain gradient parameter), the nonlocal parameter, the CNTs volume fraction, Pasternak's foundation coefficients, various boundary conditions, the CNTs efficiency parameter and geometric dimensions on the buckling behaviors of FG sandwich nano-beam. The numerical results indicate that, the amounts of the mechanical critical load calculated by PSDBT and TSDBT approximately have same values as well as ESDBT and ASDBT. Also, it is worthy noted that buckling load calculated by aforementioned theories is nearly smaller than buckling load estimated by FSDBT. Also, similar aforementioned structure is used to building the nano/micro oscillators.

• 한국식생활문화학회지
• /
• 제34권2호
• /
• pp.233-239
• /
• 2019

This paper presents a literature review on the active technologies to regulate the levels of carbon dioxide and oxygen in Kimchi packaging. In this study, laser-etched pouches and $O_2$ scavengers were used for Kimchi packaging, and the efficiency of each packaging technique to regulate the $CO_2$ and $O_2$ levels inside Kimchi packages was investigated. When Kimchi was packaged with a laser-etched pouch, the $CO_2$ concentration in the sample with a high gas transmission rate was less than that in other pouches (p<0.05), and a low $CO_2$ level had little effect on the expansion of the package volume. Kimchi treated with an $O_2$ absorber exhibited a significantly lower (p<0.05) $O_2$ concentration inside the packages relative to the control. A low $O_2$ concentration inside the Kimchi package effectively inhibited the growth of total aerobic bacteria and lactic acid bacteria, as well as yeasts and molds on Kimchi. These results suggest that $O_2$ absorbers have a positive effect on the microbial quality of Kimchi. Therefore, packaging in a laser-etched pouch and the use of an $O_2$ scavenger could provide a novel packaging material for regulating the $CO_2$ and $O_2$ levels during Kimchi packaging.

• Tribology and Lubricants
• /
• 제37권5호
• /
• pp.172-178
• /
• 2021

An injector is a mechanical device present inside the engine. Its main function is to supply an appropriate volume of fuel into the combustion chamber, which is directly related to the overall engine efficiency of a car. During the operation of an injector, a magnetic force lifts the parts of the injector from closed position to open position which generates a horizontal force on the needle. The horizontal force acts on a different position from that of the center of mass of the needle. Therefore, this causes eccentricity in the needle and the generation of a tilting motion during the lifting operation which can result in wear. However, appropriate selection of clearances for these parts can prevent wear. In this study, lubrication analysis is conducted to determine the optimum clearance of parts with sliding motion inside the injector. The height functions are derived considering the dynamic behavior and relative velocity of the parts. Using the derived height function, the pressure profiles are calculated for the lubricated surfaces from the Reynolds' equation. Subsequently, the fluid reaction forces are calculated. The equations of motions are applied to the fluid reaction forces and external forces are solved to calculate the minimum film thickness between each part with variation in the clearances. Finally, the optimum clearances are determined. The effect of the clearances on the behavior of the moving parts is presented and discussed.

• 한국전자통신학회논문지
• /
• 제16권5호
• /
• pp.799-806
• /
• 2021

사물인터넷 환경에서는 센서로부터의 이벤트 데이터가 시간의 흐름에 따라 지속적으로 보고된다. 이러한 추세로 입수되는 이벤트 데이터는 무한정 쌓이게 되므로 데이터의 효율적인 분석과 관리를 위한 방안이 필요하다. 본 연구에서는 지속적으로 보고되어 유입되는 센서로부터의 이벤트 데이터에 대하여 효과적인 선택과 활용을 뒷받침 할 수 있도록 하는 데이터 스트림 분할 방안을 제안하였다. 분석 처리를 시작할 지점을 식별하기 위한 식별자를 선정하도록 하였다. 이러한 식별자의 역할을 존치시킴으로써 분석할 대상을 명확하게 할 수 있으며 데이터 처리량을 감소시킬 수 있다. 본 연구에서 제안하는 스트림 분할을 위한 식별자는 각 스트림의 이벤트 발생을 기준으로 하기에 의미 중심의 데이터 스트림 분할 방안이라고 할 수 있다. 스트림 처리에서의 식별자의 존재는 대용량의 지속적인 데이터 유입환경에서 효율성을 제공하고 비용을 저감하는 측면에서 유용하다고 할 수 있다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제25권2호
• /
• pp.97-109
• /
• 2021

Neonatal hypoxia/ischemia (H/I), injures white matter, results in neuronal loss, disturbs myelin formation, and neural network development. Neuroinflammation and oxidative stress have been reported in neonatal hypoxic brain injuries. We investigated whether Paeoniflorin treatment reduced H/I-induced inflammation and oxidative stress and improved white matter integrity in a neonatal rodent model. Seven-day old Sprague-Dawley pups were exposed to H/I. Paeoniflorin (6.25, 12.5, or 25 mg/kg body weight) was administered every day via oral gavage from postpartum day 3 (P3) to P14, and an hour before induction of H/I. Pups were sacrificed 24 h (P8) and 72 h (P10) following H/I. Paeoniflorin reduced the apoptosis of neurons and attenuated cerebral infarct volume. Elevated expression of cleaved caspase-3 and Bad were regulated. Paeoniflorin decreased oxidative stress by lowering levels of malondialdehyde and reactive oxygen species generation and while, and it enhanced glutathione content. Microglial activation and the TLR4/NF-κB signaling were significantly down-regulated. The degree of inflammatory mediators (interleukin 1β and tumor necrosis factor-α) were reduced. Paeoniflorin markedly prevented white matter injury via improving expression of myelin binding protein and increasing O1-positive olidgodendrocyte and O4-positive oligodendrocyte counts. The present investigation demonstrates the potent protective efficiency of paeoniflorin supplementation against H/I-induced brain injury by effectually preventing neuronal loss, microglial activation, and white matter injury via reducing oxidative stress and inflammatory pathways.