• 한국지반공학회논문집
• /
• 제36권4호
• /
• pp.5-15
• /
• 2020

본 논문은 점성토의 응력-변형률 관계를 모사하기 위해 한계 상태 이론을 기반으로 하여 수정한 Modified Cam-Clay 파괴면을 제안한다. 평균유효응력과 von Mises 응력의 공간에서 타원형상의 파괴면을 가지는 Modified Cam-Clay 모델의 경우, 강성 및 발달법칙 미적용시, 비배수 전단조건하에 한계상태 평균유효응력은 선행압밀 평균유효응력의 절반이 되며, 이는 실제 점성토의 거동과 차이가 있다. 본 연구에서는 선행압밀 평균유효응력은 점성토의 압밀이력으로 정량화되고, 한계상태 평균유효응력은 점성토의 현재 간극비로 산정되어, 이 둘간의 비율이 고정되지 않는 찌그러진 형태의 파괴면을 제안한다. 제안된 파괴면을 항복평면으로 가정하고, 비배수 삼축압축 거동을 모사한 결과, 실내 실험 결과와 유사한 결과를 얻을 수 있었다

• 한국지반공학회논문집
• /
• 제35권2호
• /
• pp.37-51
• /
• 2019

본 연구는 사질토 지반에서 수행되는 콘관입시험의 수치적 모사에 초점을 맞추고 있다. 지반은 한계상태 토질역학을 바탕으로 수정된 한계상태 Mohr Coulomb 소성 모델로 모사하였다. 한계상태 Mohr Coulomb 모델에서 팽창각은 상수가 아닌 현재상태와 한계상태 사이의 위상차의 함수로 표현된다. 수치적으로 콘관입시험은 대변위 해석을 요구하며, 이를 Lagrangian 유한요소법으로 해석하기 위해 관입 유도체 개념을 적용한 축대칭 조건 유한요소법을 이용하였다. 캘리브레이션 챔버에서 수행된 콘관입시험을 한계상태 Mohr Coulomb 모델을 이용하여 본 논문에서 제안된 유한 해석 기법을 적용한 결과, 실험 결과와 유사한 결과를 얻을 수 있었다.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.161-171
• /
• 2017

The underlying ground state of a railway plays a significant role in maintaining the integrity of the overlying concrete slab and ultimately supporting the train load. While effective nondestructive tests have been used to evaluate the rail track system, they can only be performed during non-operating time due to the stress wave generated by active sources. In this study, finite element numerical simulations are conducted to investigate the feasibility of detecting unfavorable substructure conditions by using a moving train load. First, a train load module is developed by converting the train load into time-variant equivalent forces. The moving forces based on the shape functions are applied at the nodes. A parametric study that takes into account the bonding state and the train class is then performed. All the synthetic signals obtained from numerical simulations are analyzed at the frequency domain using a Fast Fourier transform (FFT) and at the time-frequency domain using a Short-Time Fourier transform (STFT). The presence of a void condition amplifies the acceleration amplitude and the vibration response. This study confirms the feasibility of using a moving train load to systematically evaluate a rail track system.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.70-80
• /
• 1989

In this research program special triaxial compression tests and dehydration-swelling tests under the condition of freeze-thaw process were conducted to show the effects of freezethaw process on the physical properties of weathered granite soil, and their results as follows; 1.Consolidation settlement of weathered granite soil mass was increased due to freeze-thaw process, and the initial tangent coefficient of dense state was higher than that of loose state. 2.Compression behaviour of soil was increased according to the decrease of freezing temperature, and when the freezing temperature was reached under - 10$^{\circ}$C, the compression rate was not influenced by change of freezing temperature. 3.The experiments showed that the void ratio and permeability of soil were converged into their values of shrinkage limit, and the permeability was higher due to the freeze-thaw process and as the lower the freezing temperature. 4.The decrease of liquid limit was indicated as the lower the freezing temperature, and as more the freeze4haw cycles, the moisture content was shown the lower side. 5.It was shown that the shrinkage was decreased by freeze-thaw process and not influenced by way of freezing temperature, but dehydration rate was higher.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.600-605
• /
• 2002

The keyhole formed by high energy density laser-material interaction periodically collapses due to surface tension of the molten metal in partial penetration welds. The collapse sometimes traps a void at the bottom of the keyhole, and it remains as welding defects. This phenomenon is seen as one cause of the instability of the keyhole during laser beam welding. Thus, it seems likely that improving the stability of the keyhole can reduce voids and uniform the penetration depth. The goal of this work is to develop techniques for controlling laser weld keyhole dynamics to reduce weld defects such as voids and inconsistent penetration. Statistical analysis of the penetration depth signals in glycerin determined that keyhole dynamics are chaotic. The chaotic nature of keyhole fluctuations and the ability of laser power modulation to control them have been demonstrated by high-speed video images of laser welds in glycerin. Additionally, an incident leading beam angle is applied to enhance the stability of the keyhole. The quasi-sinusoidal laser beam power of 400Hz frequency and 15$^{\circ}$ incident leading beam angle were determined to be the optimum parameters for the reduction of voids. Finally, chaos analyses of uncontrolled signals and controlled signals were done to show the effectiveness of modulation on the keyhole dynamics. Three-dimensional phase plots for uncontrolled system and controlled system are produced to demonstrate that the chaotic keyhole dynamics is converted to regular periodic behavior by control methods: power modulation and incident leading beam angle.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.148-154
• /
• 2020

The radiation induced segregation of Cr at grain boundaries (GBs) in Ferritic/Martensitic steels was modeled assuming vacancy and interstitialcy diffusion mechanisms. In particular, the dependence of segregation on temperature and grain boundary misorientation angle was analyzed. It is found that Cr enriches at grain boundaries at low temperatures primarily through the interstitialcy mechanism while depletes at high temperatures predominantly through the vacancy mechanism. There is a crossover from Cr enrichment to depletion at an intermediate temperature where the Cr:Fe vacancy and interstitialcy diffusion coefficient ratios intersect. The bell-shape Cr enrichment response is attributed to the decreasing void sinks inside the grains as temperature rises. It is also shown that low angle grain boundaries (LAGBs) and special Σ coincidence-site lattice (CSL) grain boundaries exhibit suppressed radiation induced segregation (RIS) response while high angle grain boundaries (HAGBs) have high RIS segregation. This different behavior is attributed to the variations in dislocation density at different grain boundaries.

• Journal of Photoscience
• /
• 제6권3호
• /
• pp.91-96
• /
• 1999

Zeolites and microporouos materials continue to attract attention as novel hosts for photochemical reactions. Zeolities are attractive because of their ability to selectivity exchange and incorporate species within the void spaces and interconnecting channels, providing a spatial arrangement of molecules. Our research has primarily focused on intrazeolitic electron transfer from excited Ru(bpy)32+ in supercages of zeolite Y to a series of bipyridinium ions. In the Ru(bpy)32+ viologen-zeolite Y samples, the slowing of the back electron transfer from the bipyridinium radical cation to Ru(bpy)32+ allows for charge propagation via self exchange between diquat molecules. This provides an opportunity for permanent charge separation. When the migrating charge on the diquat radical within the zeolite reaches the surface, it can be transferred to a neutral viologen (PVS) in solution, resulting in permanent charge separation. The advantage of long-lived charge separation can be exploited for useful chemistry if suitable catablysts can be assembled on the zeolities. We have studied Ru(bpy)2 as water oxdiation catalysts. We have demonstrated that synthesis of RuO2 fibers on a zeolite via thermal decomposition of Ru3(CO)12 leads to the most active water decomposition catalyst reported to date. Because of the extensive interest of photochemical water reduction to H2, much is known about catalytic systems usin gone electron catalyst, and even more importantly, that no reaction of viologen occurred with H2 over this catalyst. The present challenge is to incorporate all these elements of the system into an architecture and we are examining zeolite membranes for this purpose.

• 한국지진공학회논문집
• /
• 제28권4호
• /
• pp.223-231
• /
• 2024

For the OPR1000, a standard power plant in Korea, an analytical model of the containment building considering voids and deterioration was built with multilayer shell elements. Voids were placed in the vulnerable parts of the analysis model, and the deterioration effects of concrete and rebar were reflected in the material model. To check the impact of voids and deterioration on the seismic performance of the containment building, iterative push-over analysis was performed on four cases of the analytical model with and without voids and deterioration. It was found that the effect of voids with a volume ratio of 0.6% on the seismic performance of the containment building was insignificant. The effect of strength reduction and cross-sectional area loss of reinforcement due to deterioration and the impact of strength increase of concrete due to long-term hardening offset each other, resulting in a slight increase in the lateral resistance of the containment building. To determine the limit state that adequately represents the seismic performance of the containment building considering voids and deterioration, the Ogaki shear strength equation, ASCE 43-05 low shear wall allowable lateral displacement ratio, and JEAC 4601 shear strain limit were compared and examined with the analytically derived failure point (ultimate point) in this study.

• 한국지진공학회논문집
• /
• 제12권1호
• /
• pp.29-42
• /
• 2008

이번 연구의 목적은 시험기의 단부가 압밀중인 시료의 유효응력에 미치는 영향을 연구함에 있다. 압밀중에 시험기 단부와 시료사이의 마찰은 공진주 시험기 시료의 반경 및 접선방향의 유효응력을 감소시킨다. 하지만, 시료의 유효응력을 측정하는 것은 실용적이지 않다. 압밀중 시험기 시료 유효응력 상태를 평가하기 위해 두 가지 접근이 이루어졌다. 첫째, 응력상태를 추측하기 위해 신중하게 조절된 간극비와 응력이력을 가진 시료의 최대 전단 탄성계수가 측정되었다. 둘째, 여러 가지 시료 정수가 압밀중 시험기 시료의 응력상태에 미치는 영향을 분석하기 위해 유한요소법이 수행되었다. 이러한 실험 결과와 분석적 기법결과를 종합해서 압밀중 공진주 시험시료에서의 평균주응력을 예측하는 해석적 예제를 수행하였다.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.117-124
• /
• 2020

본 연구는 온도에 따른 점성토의 전단 변형의 특성의 모사에 초점을 맞춘다. 일반적으로 온도가 상승할수록 정규압밀선은 간극비와 평균유효응력의 평면에서 하향 이동한다. 하지만 한계상태선은 온도변화에 따라 정규압밀선만큼 이동하지는 않는다. 따라서, 온도가 증가할수록, 한계상태 평균유효응력과 선행압밀 평균유효응력의 차이는 감소한다. 이를 반영하기 위해, 본 연구에서는 한계상태 평균유효응력을 기준으로 두 부분으로 나뉘어진 경계면을 적용하였다. 또한 Bangkok 점성토에 대해서 경계면을 구축하고, 비배수 삼축압축시험에 대해서 요소해석을 실시하였다. 요소해석 결과, 제안된 모델은 복잡한 강성 혹은 발달 법칙 없이 실험 데이터와 유사한 점성토의 온도에 따른 역학적 거동을 잘 모사하였다.