• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.32-33
• /
• 2017

In order to improve the flow performance of high performance concrete, use of high performance water reducing agent and low viscosity type water reducing agent is a study of suitable range of use due to side effects. in this study, we aimed at reducing viscosity and yield value using high performance water reducing agent and low viscosity type water reducing agent, and this was evaluated using a rheometer. as a result of analysis of viscosity and yield value, it was found that the high performance water reducing agent has higher reduction effect than the low viscosity type water reducing agent. however, the larger the viscosity lowering effect is, the lower the usable range is, compared to general high performance water reducing agents, and it was found that sufficient consideration for this judgment of appropriate quantity is necessary.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.232-328
• /
• 2001

This paper investigates the influences of water content and viscosity agent on the bleeding of concrete. According to test results, fluidity shows decline tendency as water content decreases, and dosage of viscosity agent increases. PEO viscosity agent does not affect the air contents while, MC viscosity agent causes air loss. As for bleeding, bleeding decreases with decrease of water content. As dosage of viscosity agent increase, bleeding decreases, regardless of viscosity kinds. It is thought that viscosity agents have the favorable effect of reducing bleeding, if fluidity and air loss are improved.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.46-47
• /
• 2018

High performance concrete with low water-to-cement ratio has been widely used with increased demand of high rising buildings and huge scaled structures. Additionally, for high performance concrete, various SCMs are replaced to improve its performance from fresh state to hardened state. With the drawback of increased viscosity of the concrete mixture for high performance concrete, low-viscosity typed high range water reducer is the relatively new admixture. Therefore, as a goal of the research, under using various SCMs with wide range of content, the performance of low-viscosity typed high range water reducer was evaluated. Especially, in this research, the influence of low-viscosity typed high range water reducer on rheological properties including plastic viscosity and yield stress were assessed. As a result of the research, it is expected to provide a fundamental information of low -viscosity typed high ranged water reducer on high performance concrete with various conditions of SCMs.

• Journal of Nutrition and Health
• /
• v.29 no.6
• /
• pp.615-621
• /
• 1996

Experiments were carried out in humans to assess the relationship between viscosity and post-prandial glucose response of soluble fibers. Eight(3 male and 5 female) healthy individuals were tested for their glucose response after taking control meals or 3 test fiber meals of different viscosities. Meal viscosity of the test food was adjusted to be between 200 and 70, 000 cps. There was a significant increase in post-prandial glucose response(p=0.01) in control meals by solely increasing the volume of water. Fiber with the highest viscosity konjac mannan demonstrated the lowest relative glucose response(70.1$\pm$6.6), followed by medium viscosity xanthan (79.3$\pm$8.7)and low viscosity psyllium (86.3$\pm$10.5). The difference is significant at the level of p<0.05. However, no significant difference in relative glucose response of the same fiber was found when the 4 levels of water were added to make different meal viscosity of each fiber (p=0.476). This result suggested that hypoglycemic action of soluble dietary fibers is related to fiber viscosity rather than meal viscosity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.15-21
• /
• 1983

Preparing for treatment and management of the emulsified fuel oil which will be generalized henceforth, this paper is an attempt to examine the viscosity-temperature characteristics of emulsified heavy fuel oil which is mixed with water and emulsifier in various mixture ratio by mechanical mixer. The experimental results are summarized as follows: 1. The viscosity-temperature characteristics of the emulsified C & B grade heavy fuel oil mixed with water of same or less weight, is changed according to log.log(v+0.6)=b-3.8log T. 2. The emulsifier has to be added to the emulsified A grade heavy fuel oil mixed with water of same or less weight, because it is instable. Especially if the emulsifier is sodium stearate, it is added more than 0.3% of the weight of oil and water. 3. In the emulsified A grade heavy fuel oil mixed with water and emulsifier, the higher the ratio of water addition becomes, the higher the viscosity is and the more the viscosity-temperature slope decreases. But the higher the ratio of emulsifier addition is, the more the viscosity-temperature slope increases. In this case, the linearity of viscosity-temperature characteristic curve is poorer than that of B and C grade heavy fuel oil. 4. In the emulsified A grade heavy fuel oil mixed with emulsifier of 0.3% or less, the emulsion type is O/W type when water addition ratio is 40%, but it is W/O type when it is 10%, 20%, 30% and 50%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.171-172
• /
• 2017

In order to meet the high performance of the concrete, the viscosity increases with water binder ratio and amount of powder. because of these problems, we use high performance water reducing agent and low viscosity water reducing agent, but side effects may occur when using large amount of water reducing agent. Therefore, in this research, in order to increase the viscosity, I would like to analyze the change in viscosity and flow characteristics of paste by utilizing fly ash and lung limestone which are generally thrown away without using high performance water reducing agent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.881-889
• /
• 1998

For the application of the commercially modified starch in frozen and retort foods, apparent viscosity and water loss were measured at each stages of heating, sterilization and freezing-thawing stages. Apparent viscosity showed the exponential increase with concentration and the slopes of apparent viscosity against concentration in the Firm-Tex(hydroxypropyl distarch phosphate), Hi-Flo(acetylated distarch adipate) and Colflo 67(acetylated distarch adipate) from waxy maize starch were higher than those of Amyloacetate M20(starch acetate) and X-amylo 250(distarch phosphare) from potato starch. In the presence of 1 or 2% NaCl, X-amylo 250 among modified starches showed the increase in water loss and the decrease in apparent viscosity, whereas Colflo 67, Hi-Flo and Firm-Tex were little affected by NaCl. In the presence of 1 or 2% sucrose, water loss and apparent viscosity of the modified starches were not affected. In the range of pH 4~8, water loss and apparent viscosity of the modified starches had no change but the differences were detected to some extent between each of heating, sterilization and freezing-thawing stages. In the apparent viscosity and water loss of the modified starches after 3 week storage from heating and sterilization, Hi-Flo, Amyloacetate M20 and X-amylo 250 were not changed at the storage period, and the overall acceptability of retort food containing the modified starches such as Firm-Tex and Amyloacetate M20 were favored more than others. In the apparent viscosity and water loss of the modified starches which have been frozen and thawed three times repeatedly, Colflo 67, Hi-Flo and Firm-Tex were not changed in freezingthawing, and the overall acceptability of frozen food containing Firm-Tex was most favored.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.6 s.249
• /
• pp.546-552
• /
• 2006

In this paper we report fluid flow characteristics of $Al_2O_3$ nanoparicles suspended in water. Especially, the effects of volume fraction with the range of 0.01% to 0.3% and tube diameter with $310{\mu}m$ to 1.735mm on the pressure drop and the effective viscosity of $Al_2O_3$ nanoparicles suspended in water are experimentally investigated. It is shown that the effective viscosity of water-based $Al_2O_3$ nanofluids with 0.1 Vol.% through a circular tube of 1.024mm diameter is increased to about 6%. The effective viscosity from experimental results is compared with that from Einstein model. With the comparison, we show that Einstein model for determining the effective viscosity of nanofluids is not applicable to water-based $Al_2O_3$ nanofluids.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.78-84
• /
• 2014

Viscosity agents were added to water to improve extinguishing performance of low pressure water mist suppression system on wood cribs fire, and a small scale wood cribs fire experiment was conducted to measure the extinguishing performance. CMC and agar were used for viscosity agent and as the amount of viscosity agent enlarges, it showed the increase of the viscosity of aqueous solution and the decrease of the fluidity. On wood cribs fire experiment, the extinguishing efficiency was improved with supplemental viscosity agent as it enhanced the adhesive time of aqueous solution on the wood, and therefore expanded the contact time of fire surface. The surface tension of aqueous solution was decreased with the addition of agar which to be assumed as an increase factor of extinguishing efficiency. By the extinguishing experimental result, the most effective extinguishing agent was CMC 0.6 wt.%, with the flame suppression time and the extinguishing time were reduced by 70s and 93s respectively at this concentration.

• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.93-102
• /
• 2016

This article presents an experimental study on the effect of temperature and solid volume fraction of nanoparticles on the dynamic viscosity for the CuO/EG-water nanofluid. Nanoparticles with diameter of 40 nm are used in the present study to prepare nanofluid by two-step method. A "Brookfield viscometer" has been used to measure the dynamic viscosity of nanofluid with solid volume fraction up to 2% at the temperature range between 20 to $60^{\circ}C$. The findings have shown that dynamic viscosity of nanofluid increases with increasing particle volume fraction and decreasing temperature. Nine different correlations are developed on experimental data point to predict the relative dynamic viscosity of nanofluid at different temperatures. To make sure of accuracy of the proposed correlations, margin of deviation is presented at the end of this study. The results show excellent agreement between experimental data and those obtained through the correlations.