• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.44-52
• /
• 2013

The SIFT algorithm is being actively researched for various image processing applications including video surveillance and autonomous vehicle navigation. The computation of sin/cos function is the most cost part needed in whole computational complexity and time for SIFT descriptor. In this paper, we implement a hardware to sin/cos function of descriptor on sift feature detection algorithm. The proposed Sin/Cosine processor is coded in Verilog and synthesized and simulated using Xilinx ISE 9.2i. The processor is mapped onto the device Spartan 2E (XC2S200E-PQ208-6). It consumes 149 slices, 233 LUTs and attains a maximum operation frequency of 60.01 MHz. As compared with the software realization, our FPGA circuit can achieve the speed improvement by 40 times in average.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.189-194
• /
• 2006

In this paper, design of MUSIC algorithm, which is one of high resolution DOA (direction of arrival) estimation techniques was studied. Generally the complex-valued correlation matrix of MUSIC algorithm is transformed to unitary matrix or matrix expansion for the real hardware implementation. Using the orthogonality between the noise subspace eigenvectors and the steering vectors corresponding to signal component, we estimate DOA with the real-valued computation between steering vectors and noise subspace eigenvectors. The DOA algorithm was designed with VHDL models with considerations of 2 elements and 1 incident wave and its simulation results are derived.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.93-98
• /
• 2004

Serial ATA interface Is inexpensive comparatively and performance is superior. So it is suitable technology in demand that now require data transmission and throughput of high speed. This paper describes a design and implementation of Serial ATA Link layer about error detection and 8b/10b encoder/decoder for DC balance in frequency 150MHz. The 8b/10b Encoder is partitioned into a 5b/6b plus a 3b/4b coder. The logical model of the block is described by using Verilog HDL at register transistor level and the verified HDL is synthesized using standard cell libraries. And it is fabricated with $0.35{\mu}m$ Standard CMOS Cell library and the chip size is about $1500{\mu}m\;*\;1500{\mu}m$. The function of this chip has been verified and tested using testboard with FPGA equipment and IDEC ATS2 test equipment. It is used to frequency of 100MHz in verification processes and supply voltage 3.3V. The result of testing is well on the system clock 100MHz. The designed and verified each blocks may be used IP in the field of high speed serial data communication.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.150-161
• /
• 2012

Eye detection is widely used in applications, such as face recognition, driver behavior analysis, and human-computer interaction. However, it is difficult to achieve real-time performance with software-based eye detection in an embedded environment. In this paper, we propose a parallel hardware architecture for real-time eye detection. We use the AdaBoost algorithm with modified census transform(MCT) to detect eyes on a face image. We parallelize part of the algorithm to speed up processing. Several downscaled pyramid images of the eye candidate region are generated in parallel using the input face image. We can detect the left and the right eye simultaneously using these downscaled images. The sequential data processing bottleneck caused by repetitive operation is removed by employing a pipelined parallel architecture. The proposed architecture is designed using Verilog HDL and implemented on a Virtex-5 FPGA for prototyping and evaluation. The proposed system can detect eyes within 0.15 ms in a VGA image.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1554-1563
• /
• 1999

This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.557-562
• /
• 2005

Low-density parity-check (LDPC) codes have recently emerged due to their excellent performance. However, the parity check (H) matrices of the previous works are not adequate for hardware implementation of encoders or decoders. This paper proposes a hybrid parity check matrix which is efficient in hardware implementation of both decoders and encoders. The hybrid H-matrices are constructed so that both the semi-random technique and the partly parallel structure can be applied to design encoders and decoders. Using the proposed methods, the implementation of encoders can become practical while keeping the hardware complexity of the partly parallel decoder structures. An encoder and a decoder are designed using Verilog-HDL and are synthesized using a $0.35 {\mu}m$ CMOS standard cell library.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.511-524
• /
• 2005

In this paper, we propose a novel hardware architecture for an intra-prediction, integer transform, quantization, inverse integer transform, inverse quantization, and mode decision module for the macroblock engine of a new video coding standard, H.264. To reduce the cycle of intra prediction, transform/quantization, and inverse quantization/inverse transform of H.264, a reduction method for cycle overhead in the case of I16MB mode is proposed. This method can process one macroblock for 927 cycles for all cases of macroblock type by processing $4{\times}4$ Hadamard transform and quantization during $16{\times}16$ prediction. This module was designed using Verilog Hardware Description Language (HDL) and operates with a 54 MHz clock using the Hynix $0.35 {\mu}m$ TLM (triple layer metal) library.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.18-20
• /
• 1998

본 논문에서는 RISC Microprocessor Core 설계에 대한 기반 기술을 확립하여, GPS(Global Positioning System) 같은 Embedded 시스템 등에서 주로 사용되어 지고 있는 ARM사의 ARM7 CPU와 이진 호환이 가능한 Microprocessor를 설계하고자 하였다. 이를 위하여 RISC Microprocessor의 기본적인 구조를 바탕으로 하여 ARM7 CPU와의 호환을 위하여 ARM7 CPU의 명령어들이 주어진 Clock안에 수행될 수 있도록 설계를 하였고, 여러 모듈을 원활히 공유할 수 있도록 내부에 공유 버스를 설계하였다. 설계를 위해서 Verilog-HDL(Hardware Description Language)을 사용하였으며, Microprocessor를 기술하는데 있어서 Behavioral 구조와 RTL(Register Transfer Level) 구조를 혼합하여 사용하였다. 설계된 Microprocessor의 동작은 면적과 타이밍의 최적화를 거친 후 Cwaves 툴을 사용하여 실질적인 ARM7의 명령어들을 수행하면서 검증하였다.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.356-361
• /
• 2014

This paper proposes hardware architecture of HEVC (high efficiency video coding) CABAC (context-based adaptive binary arithmetic coding) binarizer. The proposed binarizer was designed and implemented as an independent module that can be integrated into HEVC CABAC encoder. It generates each bin string of each syntax element in a single cycle. It consists of controller module, TU (truncated unary binarization) module, TR (truncated Rice binarization) module, FL (fixed length binarization) module, EGK (k-th order exp-Golomb coding) module, CALR (coeff_abs_level_remaining) module, QP Delta (cu_qp_delta_abs) module, Intra Pred (intra_chroma_pred_mode) module, Inter Pred (inter_pred_idc) module, and Part Mode (part_mode) module. The proposed binarizer was designed in Verilog HDL, and it was implemented in 45 nm technology. Its operating speed, gate count, and power consumption are 200 MHz, 1,678 gates, and 50 uW, respectively.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2645-2648
• /
• 2003

In this paper, real-time and reconfiguable hardware filter for face recognition is proposed and implemented on FPGA chip using verilog-HDL. In general, face recognition is considerably difficult because it is influenced by noises or the variation of illumination. Some of the commonly used filters such s histogram equalization filter, contrast stretching filter for image enhancement and illumination compensation filter are proposed for realizing more effective illumination compensation. The filter proposed in this paper was designed and verified by debugging and simulating on hardware. Experimental results show that the proposed filter system can generate selective set of real-time reconfiguable hardware filters suitable for face recognition in various situation.