• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.958-979
• /
• 2023

Due to laws, regulations, privacy, etc., between 70-90 percent of providers do not share medical data, forming a "data island". It is essential to collaborate across multiple institutions without sharing patient data. Most existing methods adopt distributed learning and centralized federal architecture to solve this problem, but there are problems of resource heterogeneity and data heterogeneity in the practical application process. This paper proposes a collaborative deep learning modelling method based on the blockchain network. The training process uses encryption parameters to replace the original remote source data transmission to protect privacy. Hyperledger Fabric blockchain is adopted to realize that the parties are not restricted by the third-party authoritative verification end. To a certain extent, the distrust and single point of failure caused by the centralized system are avoided. The aggregation algorithm uses the FedProx algorithm to solve the problem of device heterogeneity and data heterogeneity. The experiments show that the maximum improvement of segmentation accuracy in the collaborative training mode proposed in this paper is 11.179% compared to local training. In the sequential training mode, the average accuracy improvement is greater than 7%. In the parallel training mode, the average accuracy improvement is greater than 8%. The experimental results show that the model proposed in this paper can solve the current problem of centralized modelling of multicenter data. In particular, it provides ideas to solve privacy protection and break "data silos", and protects all data.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.736-742
• /
• 2014

If an accident occurs at work places that handle 'the accident preparedness substances', it causes more property damage and casualties than accidents of normal chemical substances. Even though various systems and regulations have been operated in order to prevent accidents, techniques for reducing and removing human error, which is one of the main reasons of accidents, are still inadequate. In this paper, hazardous work digitization, potential hazard verification, and work evaluation based on domestic technical guidelines have been performed through a case study of the accident of hydrofluoric acid leakage in Gumi in September 2012, and development of a new risk mapping method has been studied to supplement existing systems.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.4
• /
• pp.11-22
• /
• 1999

In this study, the validity of the currently used seismic regulations for seismic isolated building structures is investigated, and a new formula for vertical distribution of seismic load is proposed. The distribution formula in UBC-91 did not provide sufficient safety, and thus revised in 1994. However it is pointed out that the revised formula overestimates the seismic load because of its similarity to that of the fixed-base structure. Therefore, in the proposed approach, it is intended to satisfy safety, economy, and applicability by combining the mode shapes of the seismic isolated structure idealized as two degrees of freedom system and those of fixed-base structure. For verification of the proposed formula, both a moment resisting frame and a shear wall system are analyzed. The results obtained from the proposed method turn out to be close to the results from a dynamic analysis.

• Journal of Technologic Dentistry
• /
• v.43 no.1
• /
• pp.29-33
• /
• 2021

Purpose: This study was conducted on dental technicians to examine the problems of the dental laboratory registration system and devise a plan to improve it. Methods: For data collection, an online survey was conducted on 14,015 dental technicians registered in the Korea Dental Technologist Association as of October 2020. Among the collected 405 questionnaires, 391 data were used for analysis. Results: We found that dental technicians felt that the dental laboratory opening registration system was unfair. There were problems including the problem of the verification method of job performance, not acknowledging the difference in the job field, and the lack of understanding of the structure of work cooperation between dentistry and dental laboratories. Furthermore, it was recognized that the system was improved by reflecting the change in job area according to the change of the times. Conclusion: There is an urgent need to reorganize the legal system so that the dental technicians can have their professionalism and autonomy recognized while remaining faithful to the public interest of protecting the national oral health by revising the related regulations, thereby ensuring smooth work activities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.185-194
• /
• 2018

This study investigates the limitations of blockchain technology and the ways to improve it by using Delphi technique. Limit factors and improvement measures are classified into technology, service, and legal system. First, from a technical point of view, lack of standardization of the technology, insufficiency of integration, lack of scalability, unclear cancellation or correction policy, excessive cost of transaction verification, insufficient personal information protection and not enough to respond to hacking defense were the limiting factors. In order to improve these, the followings; ensuring standardization, securing integration and scalability, establishing cancellation of each applicable data, establishment of correction policy, efficiency of verification cost, the protection of personal information and countermeasure against hacking are provided. The related technology development and countermeasures must be established to effectively introduce the blockchain technology to the market. Second, in the early stage of blockchain service, it showed lack of utilization of the blockchain, security threat, shortage of skilled workers, and lack of legal liability. As a solution to these problems, it is necessary to suggest various applications, against security threat, training professional manpower, and securing legal responsibility. It should also provide a foundation for providing institutionally stable services. Third, from as legal system point of view, inadequate legal compliance, lack of relevant regulation, and uncertainty in the regulation were the limiting factors. Therefore establishing a legal system, which is the most important area for activating the service, should be accompanied by the provision of legal countermeasures, clearness of regulations and measures to be taken by relevant governmental authorities. This study will contribute as a reference for a research, related to the blockchain.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.317-325
• /
• 2020

UAV (Unmanned Aerial Vehicle) photogrammetry has recently emerged as a means of obtaining highly precise and rapid spatial information due to its cost-effectiveness and high efficiency. However, current procedures or regulations for quantitative quality verification methods and certification processes for UAV-images are insufficient. In addition, the current verification method for image quality is not evaluated by an MTF (Modulation Transfer Function) analysis or edge response analysis, which can analyze the degree of contrast including image resolution, and only relies on the GSD (Ground Sample Distance) analysis. Therefore, in this study, the edge response analysis using a Slanted edge target was performed along with GSD analysis to confirm the necessity of analyzing edge response analysis in UAV-images quality analysis. Furthermore, a Matlab GUI-based software tool was developed to help streamline the edge response analysis. As a result, we confirmed the need for edge response analysis since the outputs of the edge response analysis from the same GSD had significantly different outcomes. Additionally, we found that the quality of the edge response analysis of UAV-images is proportional to the performance of the camera mounted on the UAV.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.217-226
• /
• 2022

In the view of the application of high-precision spatial information production, UAV (Umanned Aerial Vehicle)-Photogrammetry has a problem in that it lacks specific procedures and detailed regulations for quantitative quality verification methods or certification of captured images. In addition, test tools for UAV image quality assessment use only the GSD (Ground Sample Distance), not MTF (Modulation Transfer Function), which reflects image resolution and contrast at the same time. This fact makes often the quality of UAV image inferior to that of manned aerial image. We performed MTF and GSD analysis simultaneously using a siemens star to confirm the necessity of MTF analysis in UAV image quality assessment. The analyzing results of UAV images taken with different payload and sensors show that there is a big difference in σ_MTF values, representing image resolution and the degree of contrast, but slightly different in GSD. It concluded that the MTF analysis is a more objective and reliable analysis method than just the GSD analysis method, and high-quality drone images can only be obtained when the operator make images after judging the proper selection the sensor performance, image overlaps, and payload type. However, the results of this study are derived from analyzing only images acquired by limited sensors and imaging conditions. It is therefore expected that more objective and reliable results will be obtained if continuous research is conducted by accumulating various experimental data in related fields in the future.

• Journal of Korea Trade
• /
• v.27 no.2
• /
• pp.115-129
• /
• 2023

Purpose - This study empirically analyzes the consumer value of risk management associated with illegal, unreported, and unregulated (IUU) fishing of fishery products imported to Korea. The global regulatory paradigm for IUU fishing has shifted from production-centered to market-centered. As a result, changes in the international fisheries trade environment emphasizing "transparency" and "legality" of the production process are accelerating. Therefore, changes in the management systems of fishery products entering the country are also needed. Accordingly, this study estimated the consumer value for risk management of IUU fishing, targeting major fish species imported to Korea, and derived the feasibility of introducing related policies. Design/methodology - This study used the choice experiment as an analysis model to estimate consumers' willingness to pay for the "possibility to check for IUU fishing." The choice experiment assumes that the value of a good or service is composed of separable attributes and that the sum of the part-worth of these individual attributes becomes the total value. In this study, respondents were presented with profiles comprising three attributes (country of origin, price, and possibility of checking IUU fishing) and the levels of frozen poulp squid, the subject of the analysis. The participants were asked to select their preferred profile. The marginal willingness to pay for each attribute was derived from the results of the respondents' choices using conditional logit model estimates. Findings - There is a marked difference in utility based on the preference of the country of origin of fishery products among consumers. In addition, the utility of fishery products that have undergone IUU fishing verification was observed to be higher, with the utility marked to be higher for lower prices. Originality/value - Estimating the policy value of the risk management in IUU fishing of imported fisheries products in this study is a novel attempt that has never been conducted before. Several studies have been conducted to assess the risk of IUU fishing associated with the import of fishery products internationally. However, such studies are yet to be conducted in Korea. Instead, policies and studies have focused on issues related to complying with trading partners' legal and transparent standards for exporting fishery products. This study should be the beginning of more in-depth empirical and theoretical explorations to establish order in the domestic seafood market and respond to changes in international regulations on IUU fishing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.97-111
• /
• 2012

This study aims to find a proper construction cost calculation method by comparing unit prices of cost estimate in landscape construction among other public ordering construction projects. There were 7 out of 12 items from the actual work cost in the first half of 2011 were compared. The 12 items were classified as landscape Architectural construction and the 7 items were the approximate standard. As applied construction types, the comparable 35 items out of the 80 actual work cost items applied to 5 sites were compared to the unit price of the standard quantity per unit in March 2011, which was the approximate standard. Actual construction rate of the 7 items in the category of landscape sector was 104.86% for each item and 92.09% as a total construction cost. The high actual construction rate was caused by the high rate of seed spray depending on the status of applying rocks. However, there were more fundamental reasons for the cost generated from aslope treatment for grass and seed spray. So, it requires more detailed regulations on the modification factors for each soil type, the standard and needs to improve theillogical standard quantity per unit system. Actual construction rate of the 35 items in the applied sectors of civil engineering and architecture was 78.65% for each item and 71.31% (70.17%) as a total construction cost. This shows that actual unit cost cannot reflect actual cost structurally and standard quantity per unit system lacks practicality in terms of construction due to thelabor force. 85.1~91.2 % actual construction rate announced by the Ministry of Land and Maritime Affairs referred to the newly switched items. So the result was estimated as actual construction rate. This requires supplementation after verification in order to make the actual work cost produce at a proper rate. Also, standard quantity per unit system needs complementation with these actual data and so on.