• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.705-707
• /
• 2014

The vehicle network such as CAN, MOST, Ethernet has different protocols. In the case of Ethernet data, when data is transmitted from Ethernet to MOST150, it cannot be treated by Ethernet channel of MOST150, leading to data loss and transmission delays. Thus, this thesis proposes vehicle integration GATEWAY, which can form a network by organically connecting the Ethernet and MOST150 networks and minimize the delay and data losses caused by the differences in bandwidth.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.79-88
• /
• 2015

In this paper, we examine Ethernet based vehicle network which is recently emerging technology. Current MOST for entertainment will be soon replaced with the emerging Ethernet based vehicle network. Although legacy standard Ethernet has several advantages it is not suitable for vehicle backbone network without any modification. As a result, many researches are happening on extending and modification of the Ethernet function for realtime and reliability. Time-triggered Ethernet, one of many trials known as AS6802, is investigated on the architecture and functionalities. We design the traffic model on Time-triggered Ethernet and analyse the latency of the network. We also consider the QoS requirement and environment of operating configuration for vehicle network.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.401-407
• /
• 2007

This paper proposes the ethernet-based in-vehicle networking method for "body" and "multimedia" domains. The ethernet-based in-vehicle networking method should modify the topology and the layer 2 for traffic shaping. In this paper, we simulate the two ring networking systems, the Media Oriented Systems Transport (MOST) and the proposed system with the shaping by the network simulator 2 and evaluate each performance. In addition, we demonstrate the proposed networking system to exchange two kinds of traffic, i.e., QoS data and best-effort data, on the ring network constituting of three nodes. Finally this paper expects to substitute the ethernet-based in-vehicle network for the MOST in advance.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.313-318
• /
• 2014

Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.472-474
• /
• 2010

MOST Network는 차량내 멀티미디어 네트워크로 버퍼링없는 실시간 오디오 및 비디오를 전송할 수 있는 동기식 데이터 전송영역, 실시간을 요구하지 않는 패킷 데이터를 전송하는 비동기 영역, 그리고 MOST 디바이스를 제어하기 위한 control 채널이 존재한다. 본 논문에서는 차량용 멀티미디어 네트워크인 MOST Network에서 현재 널리 사용되고 있는 Ethernet과의 데이터 통신을 위한 Ethernet Frame 전송 방안을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.98-101
• /
• 2009

Recently, there is use of the vehicle network for vehicle diagnostic method and Increased use of the vehicle protocol such as (CAN(Controller Area Network), MOST, LIN, FlexRay), Distributed control and data about the vehicle are being sought methods for real-time observation and monitoring and trend tends to have gone into this. In this case of automotive diagnostic module in today, there is Primarily to use DLC(Data Link Connector)Connector called self-check terminal. Generally, vehicle Diagnoses to use DLC Connector such as OBD2(On Board Diagnostics) Through Diagnostic Module(scanner). But there limit diagnostic as engine and powertrain part, and not consider user's perspective In this paper, By designing Vehicle diagnostic monitoring system using Ethernet Port, transmit and Receives CAN protocol vehicle data, and implement Easily monitoring system that provide and Diagnoses to provide vehicle's state and information to use PC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.753-755
• /
• 2010

As demands increase for the Infotainment System, the Multimedia Networking technology for automobile, called MOST(Media Oriented Systems Transport), has been actively applied to the automobile industry, to meet the demands of the Infotainment System. The MOST25 network technology is being restrictively equipped with some of the car models but the problems withbandwidth and compatibility has arisen. In order to solve this, the MOST150 technology has been developed and further research is being carried out to applythe technology to the automobile industry. Thus, for the effective process of the Ethernet traffic in the realization of MOST150/Ethernet Gateway for automobile, we, in the research, shall analyse the Management Mapping method, including the MOST150's Isochronous channel, the MOST Ethernet Packet Channel, and etc. and study the efficient algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.3025-3047
• /
• 2021

This paper presents the latest Ethernet standardization of in-vehicle network and the future trends of automotive Ethernet technology. The proposed system provides design and optimization algorithms for automotive networking technology related to AVB (Audio Video Bridge) technology. We present a design of in-vehicle network system as well as the optimization of AVB for automotive. A proposal of Reduced Latency of Machine to Machine (RLMM) plays an outstanding role in reducing the latency among devices. RLMM's approach to real-world experimental cases indicates a reduction in latency of around 41.2%. The setup optimized for the automotive network environment is expected to significantly reduce the time in the development and design process. The results obtained in the study of image transmission latency are trustworthy because average values were collected over a long period of time. It is necessary to analyze a latency between multimedia devices within limited time which will be of considerable benefit to the industry. Furthermore, the proposed reliable camera and video streaming through optimized AVB device settings would provide a high level of support in the real-time comprehension and analysis of images with AI (Artificial Intelligence) algorithms in autonomous driving.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.389-394
• /
• 2018

Remotely operated vehicle(ROV) and autonomous underwater vehicle(AUV) have been used for underwater surveys, underwater exploration, resource harvesting, offshore plant maintenance and repair, and underwater construction. It is hard for people to work in the deep sea. Therefore, we need a vision control system of underwater submersible that can replace human eyes. However, many people have difficulty in developing a deep-sea image control system due to the deep sea special environment such as high pressure, brine, waterproofing and communication. In this paper, we will develop an Ethernet based remote image control system that can control the image mounted on ROV.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1027-1034
• /
• 2011

Electronic devices in railway vehicle perform various functions such as not only braking and propulsion but also monitoring of vehicle condition, on-line diagnosis, and passenger information service, etc. These devices, distributed in vehicle, should be efficiently connected so as to properly perform the functions. IEC (International Electro-Technical Commission) standardized train communication network (TCN) as IEC 61375-1, -2. TCN can reduce the interconnecting work load by reducing the number of wire-line, compared with existing hard-wire connection, and it brings the efficient control by enabling various devices to share the information. But existing TCN can not satisfy the increasing service demands like passenger internet access and CCTV surveillance, etc. In this paper, we investigate ECN (Ethernet Consist Network) and ETN (Ethernet Train Backbone) which are proposed to satisfy these demands and in the process of standardization by IEC TC9 WG43.