• 제목/요약/키워드: Vehicle Accident

검색결과 903건 처리시간 0.025초

차량 간 통신 기반 추월보조 서비스를 위한 시나리오 및 네트워크 성능 평가 (Scenario and Network Performance Evaluation for A Do Not Pass Warning Service Based on Vehicle-to-Vehicle Communications)

  • 서현수;정진수;이상선
    • 한국통신학회논문지
    • /
    • 제38C권3호
    • /
    • pp.227-232
    • /
    • 2013
  • ITS 기술의 발전으로 인해 교통 분야에 관련한 서비스들이 제시되고 있다. 그리고 IEEE WG802.11과 P1609에서 추진하고 있는 WAVE가 차량 간 통신 표준으로 제정되고 있다. WAVE는 빠른 연결과정을 가지며 이동성 측면에서 우수한 특성을 나타낸다. 또한 국제적으로 차량 간 통신을 이용한 국가 프로젝트 및 서비스가 제안되고 있으며, 특히 미국 도로교통안전국에서 진행 중인 VSC-A 프로젝트에 다수의 차량 제조사가 참여하고 있고 차량 간 통신을 이용한 안전 서비스 및 측위 기술들이 제안되고 있다. 이러한 안전 서비스에 대한 모델 및 성능을 위한 차량 간 통신 성능에 대한 규격을 분석하고 제시해야 할 필요성이 있다. 따라서, 본 논문에서는 차량 간 통신을 이용한 추월보조 안전 서비스에 대한 시나리오 및 모델을 제안한다. 이를 이용하여 WAVE 환경 하에서의 네트워크 시뮬레이션을 수행하여 통신 성능을 평가하였다. 향후 차량 간 통신을 이용한 추월보조 서비스의 실차 적용을 위해 고려해야 할 요소인 채널별 전송거리 및 지연시간에 대한 결과를 결론에서 제시하였다.

제4차 산업혁명 시대의 무인 이동체를 둘러싼 법적 문제점 연구 - 자율주행자동차와 드론을 중심으로 - (A Study on Legal Problems over Unmanned Vehicle of the Fourth Industrial Revolution - Focusing on the Autonomous Driving Vehicle and Drone -)

  • 계경문
    • 한국전자파학회논문지
    • /
    • 제28권7호
    • /
    • pp.519-527
    • /
    • 2017
  • 자율주행자동차의 안전성에 관한 신뢰의 문제는 관련 산업의 수요 창출과 관련하여 매우 중요한 문제이다. 신뢰 확보를 위해서는 우선 자율주행자동차의 사고발생시 법적 책임문제의 연구가 선행되어야 한다. 사고 발생 시의 문제로 가장 시급한 민 형사상의 책임귀속 문제에 있어서 민사상으로는 "제조물책임법" 하에서 자동차 제작자에게 책임을 물을 수 있을 것이나, 형사상으로는 행위자 책임을 근본으로 하는 현행 법체계에서는 사람에게 책임을 묻기가 어려운 문제이다. 이러한 문제들을 해결하기 위한 "자율주행자동차 특별법"의 제정을 제안하는 바이며, 또한 (완전) 자율주행자동차가 운행하는데 필요한 각종 시스템 또는 인프라의 구축과 그 운용에 따른 국가 또는 공적인 "인증" 등 제도의 구축도 필요하다. 드론의 경우, 그 비행의 특성상 영상 촬영장치를 장착하고 비행할 때, 개인의 정보 및 위치 정보까지 수집되는 법적인 문제점을 내포하고 있다.

차량내부정보와 외부센서를 사용한 블랙박스 구현 (A implement of blackbox with in vehicle network data and the external sensor data)

  • 김장주;장종욱
    • 한국정보통신학회논문지
    • /
    • 제14권11호
    • /
    • pp.2471-2477
    • /
    • 2010
  • 최근, 사용이 급증하고 있고 중요성이 높아지고 있는 차량용 블랙박스는 이제 보다 정확하고 다양한 정보를 요구하고 있다. 그 이유는 정확한 사고원인 분석에 도움을 주고 차량관련 범죄에 객관적인 증거자료로 사용될 수 있도록 하기 위함이다. 본 논문에서는 영상과 음정 정보에만 의존하던 기존의 블랙박스가 가지고 있는 한계를 극복하고자 다양한 센서들과 차량 내부정보를 사용하였다. 우선 차량내부 정보를 알 수 있는 OBD II 프로토콜을 사용하여 차량의 현재 상태를 저장하였으며, 또한 외부센서로는 방향각을 알 수 있는 Gyro 센서와 GPS를 사용하여 정확한 현재위치 및 차량의 방향정보를 저장하였으며 차량의 사고 전후의 이동경로 및 방향을 알 수 있으며, 정보들의 동기화를 위해서는 GPS의 시간 정보를 사용하였다. 또한 wifi망을 사용하여 정보를 백업하여 블랙박스 손상 시에도 정보를 확인할 수 있게 하였다.

경로 최적화 알고리즘을 이용한 3차원 차량 충돌 시뮬레이션 (Vehicle Crash Simulation using Trajectory Optimization)

  • 성진욱;고승욱;권태수
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제21권5호
    • /
    • pp.11-19
    • /
    • 2015
  • 본 논문은 실제 블랙박스 영상을 통해 추적한 차량의 실제 경로 또는 사용자가 UI를 통해 그린 차량의 이동 경로를 이용하여 사실적인 3차원 차량 충돌 장면을 물리 시뮬레이션을 통해 생성하는 알고리즘을 제안한다. 시뮬레이션에 사용될 차량의 3차원 경로의 획득, 물리 기반 시뮬레이터 상에서 사용자가 원하는 경로대로 3차원 차량 모델을 적은 오차로 제어하는 경로 추적 알고리즘, 그리고 남아있는 오차를 보다 더 줄여주는 경로 최적화 알고리즘을 조합하여 사용자의 의도에 맞는 정확한 경로에서의 차량 충돌 장면을 재현하도록 도와준다. 또한 차량 충돌로 인한 차체의 변형을 차량 모델 골격의 세분화를 통하여 실시간으로 시뮬레이션 하여 실제 교통사고 시의 차량의 충돌 장면이 최대한 가상공간에서 사실적으로 재현되도록 한다.

시뮬레이션을 이용한 충돌 전후 차량 진행궤적 분석 (Analysis of vehicle progress before and after a collision using simulation)

  • 한창평
    • 한국산학기술학회논문지
    • /
    • 제22권1호
    • /
    • pp.402-408
    • /
    • 2021
  • 기계 설계를 기반으로 제작한 자동차에 의한 사고 발생 시 차량 공학적인 분석은 심도 있게 조사하지 않고 조사자의 주관적인 경험 지식을 토대로 분석하는 경우가 있다. 본 연구는 실제 발생한 중앙선 침범 사고 자료를 토대로 캐드(CAD) 프로그램을 이용하여 현장 상황을 도면화하고, 도면화 한 자료를 시뮬레이션 프로그램(PC-Crash)에 적용하여 250번의 충돌 상황을 반복적으로 수행하여 최종 정지 위치 및 최종 정지 자세와 부합하는 충돌 속도, 진행 자세, 조향 작동 여부 및 제동 여부 등의 상관 관계를 분석했다. 충돌 속도가 낮을수록 이탈각의 영향을 크게 받지 않고 속도가 높은 차량의 속도에 영향을 크게 받고 충돌 이후에는 유효 충돌 속도와 같이 속도가 낮은 차량은 높아지고, 속도가 높은 차량은 낮아진다. 본 연구의 시뮬레이션 결과는 마이티가 중앙선을 넘은 자세로 오르막 좌커브 구간을 진행하다가 마주오던 포터를 인지하고 자기 진행 차로로 복귀하는 과정과 포터의 전면 좌측면이 충돌하여 포터가 우대각선 방향으로 밀려나 전면이 약 11시 방향을 향해 최종 정지하는 것을 규명하였다.

방호울타리 안전성능에 관한 충돌해석 연구 (A Study on the Safety Performance of Roadside Barriers by Collision Analysis)

  • 이영호;송재준;이상윤
    • 한국산학기술학회논문지
    • /
    • 제13권11호
    • /
    • pp.5558-5565
    • /
    • 2012
  • 도로 방호울타리는 차량의 이탈을 방지하는 시설로, 도로의 형태나 제한속도 등을 기준으로 하여 7 종류의 방호울타리를 규정하고 있다. 하지만, 최근 차량의 성능이 향상되면서 과적, 과속의 위험이 있고, 국내외 방호울타리 관련 차량사고를 보면 추락사고가 빈번하게 발생하고 있어, 현재의 방호울타리 설계충격도가 다소 부족한 것으로 나타나고 있다. 본 연구에서는 고속도로에 주로 적용하는 SB5 강재 방호울타리와 SB6 콘크리트 방호울타리의 차량방호 성능을 검증하기 위하여 차량충돌해석을 수행하여, 방호울타리의 파괴 및 차량전도 조건을 산출하였다.

비황분계 부취제를 혼합한 LPG 연료의 차량 배출가스 특성에 관한 연구 (A Study on the Exhaust Emissions Characteristics of LPG Vehicle using LPG Fuel with Sulfur Free Odorant)

  • 김재곤;이호길;임의순;정충섭
    • 한국대기환경학회지
    • /
    • 제30권6호
    • /
    • pp.545-554
    • /
    • 2014
  • In general, odorant was added to fuel gases, such as LPG, LNG and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. This study describes a study on the exhaust emissions characteristics and fuel economy of liquefied petroleum gas (LPG) vehicle using LPG fuel with new sulfur free odorant. New sulfur free odorant was added to LPG to reduce sulfur content of the LPG. Its performance and exhaust emission were compared to those of LPG with sulfur containing odorant (EM, ethyl mercaptan). Engine performance using LPG with sulfur free odorant was similar to that with sulfur-containing odorant. Exhaust emissions from the LPG vehicle with LPG including sulfur free odorant were also similar to those with LPG including sulfur containing odorant in the FTP 75 and NEDC mode. There experimental results suggest that the sulfur free odorant may substitute for the sulfur containing odorant in LPG fuel.

차량 주행 상태에서 허브 베어링 이상을 진단할 수 있는 장치 개발 (Development of Diagnosis System for Hub Bearing Fault in Driving Vehicle)

  • 임종순;박지헌;김진용;윤한수;조용범
    • 한국자동차공학회논문집
    • /
    • 제19권2호
    • /
    • pp.72-77
    • /
    • 2011
  • In this paper, we propose effective diagnosis algorithm for hub bearing fault in driving vehicle using acceleration signal and wheel speed signal measured in hub bearing unit or knuckle. This algorithm consists of differential, envelope and power spectrum method. We developed diagnosis system for realizing proposed algorithm. This system consists of input device including acceleration sensor and wheel speed sensor, calculation device using Digital Signal Processor (DSP) and display device using Personal Digital Assistant (PDA). Using this diagnosis system, a driver can see hub bearing fault(flaking) from the vibration in driving vehicle. With early repairing, he can keep good ride feeling and prevent accident of vehicle resulting from hub bearing fault.

Trajectory-prediction based relay scheme for time-sensitive data communication in VANETs

  • Jin, Zilong;Xu, Yuxin;Zhang, Xiaorui;Wang, Jin;Zhang, Lejun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권8호
    • /
    • pp.3399-3419
    • /
    • 2020
  • In the Vehicular Ad-hoc Network (VANET), the data transmission of time-sensitive applications requires low latency, such as accident warnings, driving guidance, etc. However, frequent changes of topology in VANET will result in data transmission failures. In order to improve the efficiency of VANETs data transmission and increase the timeliness of data, this paper proposes a relay scheme based on Recurrent Neural Network (RNN) trajectory prediction, which can be used to select the optimal relay vehicle to transmit data. The proposed scheme learns vehicle trajectory in a distributed manner and calculates the predicted trajectory, and then the optimal vehicle can be selected to complete the data transmission, which ensures the timeliness of the data. Finally, we carry out a set of simulations to demonstrate the performance of the algorithm. Simulation results show that the proposed scheme enhances the timeliness of the data and the accuracy of the predicted driving trajectory.

소방대의 현장접근성 강화를 위한 설비의 개선방안 (The Way for improvement of facility to strengthen accessibility of the site for fire department)

  • 오택흠;성재만;박찬석
    • 대한안전경영과학회지
    • /
    • 제14권3호
    • /
    • pp.67-75
    • /
    • 2012
  • Because recently(July 14, 2011) fire occurred in the engine room of a moving taxi under Namsan Tunnel 1, 51 vehicles' driver and more than 250 passengers in the road tunnel were urgently evacuated with abandoned vehicles. Vehicle fires in Namsan Tunnel that day, Sufferers struggled to escape quickly difficult to escape the two-way by abandoned vehicles on the road and to fear many casualties by using vehicle fuel and combustible interior and the driver who is ignorant of vehicle accident continuous entered in the road tunnel had accessibility the site of fire department was more difficult. In this study, It is to investigate structure and basic materials, such as fire extinguish equipment and facilities for damage prevention and to analyze the problems and to plan improvement method of fire extinguish equipment, facilities for damage prevention and transportation facilities(Large traffic signs, Breaker, etc.) on the Namsan Tunnel that in the long-term plan is prepared to strengthen for accessibility of the site of fire department in case of Vehicle's fire.