• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.104-113
• /
• 2010

Domestic insurance claims were statistically investigated to analyze the elderly driver's accident patterns and injury types in side impact crashes. Medical treatment records and accident vehicle damage photos have been surveyed for 5,419 cases. The results of our statistical analysis showed that the thorax injury risk of the elderly drive group is 8.8 and 4.0 times higher than that of the young and middle age group respectively. Diagnosis showed that most thorax injuries were caused by rib fracture. The head injury risk of the elderly female driver group seemed to be higher than that of the younger female driver group, however, statistical test has not been conducted because of the lack of number of samples for elderly female accident.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.724-729
• /
• 2016

This case study carried out a rear-end collision accident analysis and physical simulation of an SUV and passenger car. The speed of the SUV by physical analysis is 71 ~ 87 km/h, while the speed of the passenger car is 6 ~ 22 km/h. Simulation results showed the optimal speed conditions for the SUV was 71 km/h, and 7 km/h for the passenger car. Simulations can be verified for the collision analysis. The findings of this study are expected to increase the reliability of accident reconstructions.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.27-32
• /
• 2012

Recently, in order to reduce traffic accident related fatalities, increasing number of studies are conducted regarding the vehicle safety enhancement devices. But very few studies about test procedures and requirements for vehicle safety systems are being carried out. Since BSD, as one of the most important safety features, is installed on a new vehicle, its performance test method has to be evaluated. Independent factors irrelevant to the device types including collision position, vehicle speed and closing speed are used to calculate test distance away from the current vehicle. Effect of roadway geometry as radius of curvature is introduced to propose possible misjudgement of following vehicle as adjacent one. The study results would be utilized to enhance the test procedure of BSD performance.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.54-62
• /
• 1983

This paper presents structural analyses performed on the white body of vehicle using the most competitive analyzer, Finite Element Method, and attempts to obtain design criteria of body. By applying the substructure and restart technique to structural model, computation time is reduced. The synthetic processing from modelling to graphic visualization is accomplished by several subprograms, viz., various pre-post processors. On the basis of home-made vehicle modeling, typical cases of accident and service load is analyzed and discussed. The results obtained will guide the designer to design the structure optimally.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2011

In order to reconstruct vehicle-pedestrian collision accidents, this paper presents a fuzzy tool to estimate accurately the impact velocity of the vehicle using parameters which could be easily collectable at the accident scene. The fuzzy rules and membership functions were set up using number of over 200 domestic and foreign data from accidents and empirical tests and 700 data from multibody simulation experiments. The developed fuzzy tool deduces the category of pedestrian trajectory and impact speed of the vehicle using 4 membership functions and 2 logic rules. The membership function of throw distance was differently set according to the deduced category of trajectories. The implemented fuzzy program was validated through comparing with the domestic and foreign empirical data. The output results agree very well in impact velocities of vehicle resulting the accuracy and usefulness of the developed tool in the reconstruction analysis of vehicle-pedestrian collision accidents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.255-263
• /
• 2014

Today, a number of CCTV on the highway is to observe the flow of traffics. There have been a number of studies where traffic data (e.g., the speed of vehicles and the amount of traffic on the road) are transferred back to the centralized server so that an appropriate action can be taken. This paper introduces a system that detects the changes of traffic flows caused by an accident or unexpected stopping (i.e., vehicle remains idle) by monitoring each lane separately. The traffic flows of each lane are level spacing curve that shows Wigner distribution for location vector. Applying calogero-moser system and Hamiltonian system, probability equation for each level-spacing curve is derived. The high level of modification of the signal means that the lane is in accident situation. This is different from previous studies in that it does more than looking for the signal from only one lane, now it is able to detect an accident in entire flow of traffic. In process of monitoring traffic flow of each lane, when camera recognizes a shadow of vehicle as a vehicle, it will affect the accident detecting capability. To prevent this from happening, the study introduces how to get rid of such shadow. The system using Basian network method is being compared for capability evaluation of the system of the study. As a result, the system of the study appeared to be better in performance in detecting the modification of traffic flow caused by idle vehicle.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.570-576
• /
• 2017

Trucks take up more portions than cars on highways. Due to this, road use relatively diminish and it serves locally as a threatening factor to nearby drivers. Baggage car accident has distinct characteristics so that it needs the application of different analysis opposed to ordinary accidents. Accident prediction model, one of accident analyses, is used to predict the numbers of accident in certain parts, establish traffic plans as well as accident prevention methods, and diagnose the danger of roads. Thus, this study aims to apply the accident rate of baggage car on highways and calculate the correction factor to be put in the accident prediction models. Accident data based on highway was collected and traffic amounts and accident documents between 2014 and 2016 were utilized. The author developed an accident prediction model based on numbers of annual accidents and set mean annual and daily traffic amounts. This study intends to identify the practical accident prediction model on highway and present an appropriate solution by comparing the prediction model in accords with the accident rate between baggage cars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.539-546
• /
• 2011

Traffic accident collision interpretation is composed of various shapes, and speed variations working to the vehicle during collision are utilized as a very important factor in evaluating collision degrees between vehicles and safety of passengers who got in the vehicle. So, methods of interpreting results on speed variations utilizing simulation programs on the collision interpretation become necessary. By the way, reliability evaluation on each program is being required because various collision interpretations simulations are spread widely. This study utilized collision interpretation programs such as EDSMAC and PC-CRASH adopting completely different physical approaches, and then carried out collision experiments of one-dimensional front and two-dimensional right angle while changing values of a lot of collision factors such as vehicle's weight, center of gravity, rolling resistance, stiffness coefficient, and braking forces among early input conditions. Also, the study recognized effects of collision factors to speed variations as output results during crashing. As a result of this research, two simulation programs showed same speed variations together on the vehicle's weight, center of gravity, and braking forces. Stiffness coefficient of the vehicle reacted to EDSMAC only, and rolling resistance coefficient did not affect any particular influences on speed variations. However, there appeared a bit comparative differences from the speed variation's values, and this is interpreted as responding outcomes by applying fixed properties values to each simulation program plainly. Therefore, reliability on analysis of traffic accident collisions shall be improved by doing speed analysis after taking the fixed value of simulation programs into consideration.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.132-145
• /
• 2022

This study was based on the black box images of traffic accidents on highways, cluster analysis and prediction model comparisons were carried out. As analysis data, vehicle driving behavior and road surface conditions that can grasp road and traffic conditions just before the accident were used as explanatory variables. Considering that traffic accident data is affected by many factors, cluster analysis reflecting data heterogeneity is used. Each cluster classified by cluster analysis was divided based on the ratio of the severity level of the accident, and then an accident prediction evaluation was performed. As a result of applying the Logit model, the accident prediction model showed excellent predictive ability when classifying groups by cluster analysis and predicting them rather than analyzing the entire data. It is judged that it is more effective to predict accidents by reflecting the characteristics of accidents by group and the severity of accidents. In addition, it was found that a collision accident during stopping such as a secondary accident and a side collision accident during lane change act as important driving behavior variables.