• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.489-494
• /
• 2001

In this thesis, the microstructure and electrical properties of ZnO varistors were investigated according to ZnO varistors with various formulation. A∼E's ZnO varistor ceramics were exhibited good density, 95% of theory density and low porosity, 5%, wholly. The average grain size of A-E's ZnO varistor ceramics exhibited 11.89$\mu\textrm{m}$, 13.57$\mu\textrm{m}$, 15.44$\mu\textrm{m}$, 11.92$\mu\textrm{m}$, 12.47$\mu\textrm{m}$, respectively. Grain size of C's ZnO varistor is larger and grain size of A and D's are smaller than other varistors. In the microstructure, A∼E's ZnO varistor ceramics sintered at l130$^{\circ}C$ was consisted of ZnO grain(ZnO), spinel phase(Zn$\sub$2.33/Sb$\sub$0.67/O$_4$), Bi-rich Phase(Bi$_2$O$_3$) and inergranular phase, wholly. Reference voltage of A∼E's ZnO varistor sintered at 1130$^{\circ}C$ decreased in order D, E > A > B > C's ZnO varistors. Nonlinear exponent of varistors exhibited high characteristics, above 30, wholly. Consequently, C's ZnO varistor exhibited good nonlinear exponent, 68. Lightning impulse residual voltage of A, B, C and E's ZnO varistors suited standard characteristics, below 12kV at current of 5kA.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.284-289
• /
• 2014

The effects of additives (Nb, Bi and Cr) on the microstructure, varistor properties, and aging behavior of V/Mn/Co/ La/Dy co-doped zinc oxide ceramics were systematically investigated. An analysis of the microstructure showed that all of the ceramics that were modified with various additives were composed of zinc oxide grain as the main phase, and secondary phases such as $Zn_3(VO_4)_2$, $ZnV_2O_4$, and $DyVO_4$. The $Bi_2O_3$-modified samples exhibited the lowest density, the $Nb_2O_5$-modified sample exhibited the largest average grain size, and the $Cr_2O_3$-modified samples exhibited the highest breakdown field. All additives improved the non-ohmic coefficient (${\alpha}$) by either a small or a large margin, and in particular an $Nb_2O_5$ additive noticeably increased the non-ohmic coefficient to be as large as 36. The $Bi_2O_3$-modified samples exhibited the highest stability with variation rates for the breakdown field and for the non-ohmic coefficient (${\alpha}$) of -1.2% and -26.3%, respectively, after application of a DC accelerated aging stress of 0.85 EB/$85^{\circ}C$/24 h.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.875-879
• /
• 2010

In this study, we have characterized the roles of $Cr_2O_3$ on the sintering and electrical properties of ZnO. The densification and grain growth of Cr-doped ZnO (ZCr) system was mainly influenced by Cr contents. In the beginning of sintering, the densification of ZnO was retarded as reducing the Zni concentration in ZnO lattice with Cr doping. And the densification and grain growth of ZnO was more retarded due to a formation of spinel phase with increasing the Cr contents. ZCr system revealed varistor behavior with nonlinear coefficient $\alpha$ of 3~23 depending on the sintering temperature, implying double Schottky barrier formation on the grain boundary of ZnO. Especially the best varistor characteristics should be developed with 0.1~0.5 at% Cr contents and under $1100^{\circ}C$ in ZCr systems.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.659-667
• /
• 1997

The influence of SiO$_2$on the microstructure and electrical properties of zinc oxide varistor was investigated. Zn$_2$SiO$_4$third phase in the sintered body was found at grain boundaries, multiple grain junctions, and occasionally within ZnO grains. This phase acted as a grain growth inhibitor, which retard the grain growth of the ZnO matrix by impeding migration on the grain boundaries. As SiO$_2$ addition increases, average grain size decreased from 40.6${\mu}{\textrm}{m}$ to 26.9${\mu}{\textrm}{m}$ due to the pinning effect by Zn$_2$SiO$_4$ and drag effect by Si segregation at grain boundaries, the breakdown voltage consequently increased. When SiO$_2$ addition is increased, interface state density decreased, however, the barrier height increased by decrease of donor concentration, as a result, the nonlinear exponent increased and leakage current decreased. While, as SiO$_2$ addition increase, it was found that the apparent dielectric loss factor shows a tendency of decrease. Wholly, electrical properties of zinc oxide varistor can be said to be improved by SiO$_2$addition.

• 한국결정성장학회지
• /
• 제17권2호
• /
• pp.63-68
• /
• 2007

EMI filter와 같은 적층형 세라믹 제조 시 공정 상 많은 문제점이 야기된다. 특히 표면과 계면에서의 crack, camber, delamination 같은 결함이 없는 적층체를 얻기 위해 서로 다른 두 재료의 동시 소성에 의한 수축율 조절이 필수적이다. 본 연구에서는 ferrite의 분체 특성을 통해 varistor/ferrite의 동시소성 거동을 연구하였다. ferrite 분말을 각각 24시간, 48시간, 72시간 분쇄하여 varistor와 ferrite 각각의 슬러리를 제조하고 doctor blade법으로 green sheet를 제조하였다. 슬러리는 분말 55wt(%)에 binder solution 45wt(%)로 혼합하여 제조하였다. Varistor와 ferrite green sheet는 $80 kg/cm^2$로 적층하여 $900^{\circ}C$, $1000^{\circ}C$에서 3시간 소결 하였다. 그 결과 분쇄시간과 소결온도 조절로 결함이 없는 동시 소성된 ferrite/varistor 적층체를 제조 할 수 있었다.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.186-193
• /
• 2000

Effects of 1.0 mol% CoO addition on sintering and the electrical properties of ZnO-Bi2O3-Sb2O3(ZBS) varistor system with 3.0 mol% co-addition of Sb2O3 and Bi2O3 at various Sb/Bi ratio (0.5, 1.0, and 2.0) were investigated. Cobalt had little influence on the liquid-phase formation and the pyrochlore decomposition temepratures of ZBS, while densification was mainly dependent on Sb/Bi ratio: when Sb/Bi=0.5, excess Bi2O3 irrelevant to the formation of pyrochore(Zn2Sb3Bi3O14) forms eutectic liquid at ~75$0^{\circ}C$ which promotes densification and grain growth; with Sb/Bi=2.0, the second phase Zn7Sb2O12 formed by excess Sb2O3 irrelevant to the formation of the pyrochlore retards densification up to ~100$0^{\circ}C$. These phases caused the coarsening and uneven distribution of the second phase particles on the grain boundaries of ZnO above the pyrochlore decomposition temperature(~105$0^{\circ}C$), which led to broad size dist-ribution of ZnO; the specimen with Sb/Bi=1.0 showed homogeneous microstructure compared with the others, which enabled improved varistor characteristics. Doping of Co increased the nonlinearity and the potential barrier height of ZBS, which is thought to stem from improved sintering behavior such as homogenized microstructure due to size reduction and even distribution of the second phase and suppressed volatility of Bi2O3, as well as the improvement in the potential barrier structure via increased donor and interface electron trap densities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.955-958
• /
• 2001

The structure characteristics of varistor of Zn oxide to depend on the breakdown voltage has been investigated to annealing condition by additive material of Sb$_2$O$_3$ system. The breakdown voltage that has not doping Sb$_2$O$_3$ was 235[V]. ZnO varistors was shown ohmic properties when it's applied voltage was below critical voltage. It was shown non-ohmic properties over critical voltage, because current was increased with decreasing resistance. High voltage ZnO varistors had high breakdown voltage, but it had bad electrical stability with various surge. Sb$_2$O$_3$was increased non-linear coefficient in ZnO varistors grain boundary.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.504-509
• /
• 2018

The influence of yttrium doping on varistor properties of zinc-vanadium-based ceramics was comprehensively investigated. The average grain size varied slightly between 5.2 and $5.5{\mu}m$ as the yttrium content increased; and similarly, the sintered density varied slightly between 5.47 and $5.51g/cm^3$. The threshold field exhibited a maximum value (5387 V/cm) when the yttrium content was 0.1 mol%. The highest nonlinear exponent (67) was obtained when the yttrium content was 0.05 mol%. The donor concentration increased in the range of $(2.46-5.56){\times}10^{17}cm^{-3}$ as the yttrium content increased, and the maximum barrier height was obtained (1.24 eV) when the yttrium content reached 0.05 mol%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.336-337
• /
• 2005

ZnO varistor ceramics were fabricated as a function of the amount of $Y_2O_3$ addition and sintered at $1250^{\circ}C$ for 2 hour. The average grain size was decreased from 14.2 ${\mu}m$ to 8.3 ${\mu}m$ with the amount of $Y_2O_3$ addition, and varistor voltage was increased from 433 V to 563 V with $Y_2O_3$ addition. Nonlinear coefficient a of all specimens were increased with the amount of $Y_2O_3$ more than 67, in case of $Y_2O_3$ 0.01wt% addition showed the excellent results of 87. And leakage current was less than $1{\mu}A$ at 82% of varistor voltage. The clamping voltage ratio of the specimens added 0.01wt% $Y_2O_3$ was 1.41 at 25A [8/20${\mu}s$]. At the specimen 0.01wt% $Y_2O_3$ addition. endurance of surge current and deviation of varistor voltage were 5700A/$cm^2$ and $\Delta$-2.86%, respectively.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.357-362
• /
• 1999

ZnO varistors containing cobalt, praseodymium and calcium oxides were prepared. The current-voltage charcteristics and microstructures of the specimens were investigated with respect to calcium addition and sintering temperature. The potential barrier heights and the carrier densities were estimated from C-V relations. The compatibility of Ag-Pd as an internal electrode for multilayer chip varistor was also examined.