• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.91-99
• /
• 2011

Risk ranking must be determined for various hazards/food combinations to conduct microbial risk management effectively. Risk Ranger is a simple, easy-to-use calculation tool developed in Microsoft Excel and designed to rank the risk (low, medium, and high) for semi-quantitative microbial risk assessment. The user is required to answer 11 questions in Risk Ranger related to 1) severity of the hazard, 2) likelihood of a disease-causing dose of the hazard being present in the meal, and 3) the probability of exposure to the hazard in a defined time. This study determined the risk ranking for twenty three combinations of foodborne pathogens/potentially hazardous foods (PHFs) using a Risk Ranger. In this study, pathogenic E. coli in fresh cut produce salad was scored as 79, which was the highest rank among the 23 combinations of the foodborne pathogens and PHFs. On the other hand, zero risk was obtained with V parahaemolyticus in sushi, Salmonella in meat products and E. coli O157:H7 in hamburger patties. Although Risk Ranger is very simple method to rate the risk of foodborne pathogens and PHFs combination, the accuracy of result was mainly affected by the availability and accuracy of data in the literature. According to the result of literature review, the data are needed for contamination rate of raw materials, consumption amount/frequency of PHFs, and the effect of processing on pathogen. Risk ranking must be continuously revalidated with new data.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.77-81
• /
• 2005

To determine the appropriate method out of various available methods to measure build-up doses, the measurements and comparisons of depth doses of build-up region including the surface dose were executed using the Attix parallel-plate ionization chamber, the Markus chamber, a cylindrical ionization chamber, and a diode detector. Based on the measurements using the Attix chamber, discrepancies of the Markus chamber were within $2\%$ for the open field and increased up to $3.9\%$ in the case of photon beam containing the contaminant electrons. The measurements of an cylindrical ionization chamber and a diode detector accord with those of the Attix chamber within $1.5\%\;and\;1.0\%$ and after those detectors were completely immersed in the water phantom. The results suggest that the parallel-plate chamber is the best choice to measure depth doses in the build-up region containing the surface, however, using cylindrical ionization chamber or diode detector would be a reasonable choice if no special care is necessary for the exact surface dose.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.77-97
• /
• 1995

The protection of the marine environment is one of the main international legal problems in recent years. In parallel with the industrial development, a great quantity of chemical materials were used and in consequence, mass transportation of oil and other dangerous materials was required on the one hand, and discharge of industrial wasters drew also the attention on the other hand. Furthermore, oil tankers accidents, mass use of nuclear materials, sea-bed exploration and exploitation stimulated further deep human concern on the marine environment. The expansion of international concern to new and more dangerous sources of marine pollution regarded more strict and legal control on the Oil Tanker(DWT 95, 000tons, Cb=0.805) model. Calculation results are compared to the international, especially regional level. In particular, this study is concerned with the preservation of the Northeast Asian Seas surrounded by Japan, the Russian Far East, South Korea, North Korea, China and Taiwan. These adjacent countries must intensify cooperation regarding the prevention, reduction and control of the contamination of the sea. And this cooperation between the States concerned should, as much as possible, be aimed at maximizing the effectiveness of measures to prevent or abate transboundary environmental pollution. To achieve this purpose, States concerned should be imposed upon duties such as duty to assess the environmental impact, duty to inform, duty to consult and duty to assist on the basis of general principle of international law, international customary law and other various resolutions of international bodies. Depending on the nature and extent of actual or potential transboundary pollution with the use of a natural resource or the environment in general the establishment of some form of institutionalized cooperation between the States concerned may become useful or indispensable. The functions of this Organization are, inter alia, to keep the implementation of the Convention and the protocals under continuous observation, to make recommendations on regional or sub-regional rules and standards to be elaborated and on measures to be taken by the Contracting Parties, to be notified of any grave and imminent danger from pollution or threat of pollution by the Contracting Parties and to promote in close cooperation with appropriate governmental bodies additional measures to protect the marine environment of the Northeast Asian Seas, and so on. Above mentioned countries, first of all, are located within the Northeast Asian Seas geographically and, therefore, take responsibilities of preserving the clean sea against marine interferences regardless of any difference of the social, political and economic systems. They must be followed under the UNCLOS and other marine conventions. Under the present circumstances, Northeast Asian Seas will become dead seas in case that there is no instant and prompt action against pollution. Hence we have an absolute obligation to promote the development of the mandatory international environmental law, which in turn can faciliate more effective implementation of the regional cooperation by the neighbouring states within this area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.117-124
• /
• 2019

Vibrio cholerae is a very important pathogenic bacterium that has to be monitored in seafood and ships' ballast water. Various methods have been developed to identify this bacterium, yet these methods are time-consuming and have limitations for their sensitivity to detect contamination. The purpose of the present study was to develop a robust and reliable method for identifying V. cholerae. Peptide nucleic acid (PNA) probes were developed to use for PNA-based asymmetrical real-time PCR techniques. The toxigenic Cholera enterotoxin subunit B (ctxB) gene was selected as a target for detecting V. cholerae and the gene was synthesized as a positive template for conventional and real-time PCR. Real-time PCR primers and PNA probes were designed and standard curves were produced for the quantitative analysis. The selected PNA probes reacted specifically to V. cholerae without any ambiguity, even among closely related species, and the detection limit was 0.1 cfu/100 mL. Taken together, the PNA probes and asymmetrical qPCR methods developed in this present study could contribute to the rapid, accurate monitoring of V. cholerae in marine environments, and as well as in seafood and ships' ballast waters.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.261-266
• /
• 1979

This experiment was carried out to evaluate the sanitary quality of cultured vegetables and to check the removing rate of bacteria by treating methods such as washing with tap water or commercial detergent, or blanching. Samples collected from farm land located at Busan suburbs and markets were Fragaria chiloensis var. ananasa, Lycopersicum esculentum, Capsium longum, Cucumis sativus, Lactuca scariola var. sativa leaf of Perilla frutescens var, japonica, Oananthe stolonifera and Allium odoium. Fecal coliform MPN was ra god from less than 30 to 430,000 per 100 grams of samples examined while plate count was $7.2\times10^3\;to\;2.2\times10^7$ per gram. Usually contamination rate of fecal coliform of leaf vegetal)les was much higher than that of fruit vegetables. Removing rate of bacterial density of vegetables by washing three times with tap water was about $70\%$ in fruit vegetables, about $20\%$ in leaf vegetables but it was about $80\%$ in leaf vegetables by washing with a commercial detergent. Sirvival rate of viable cell count of leaf vegetables was less than $0.1\%$ after blanching for one minutes in boiling tap water, Composition of coliform was $18\%$ Escherichia coli group, $22\%$ Citrobacter freundii group and $60\%$ Klebsiella aerogenes group, among Escherichia coli, type I being $16\%$ in total. The coliform detection from BGLB gas positive tubes being planted with various vegetables was about $80\%$ in the result of IMViC reaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1063-1068
• /
• 2010

This study compared UV and UV/$H_2O_2$ inactivation of E.coli, a possible indicator microorganism for fecal contamination of water, and $Q{\ss}$ phage, an indicator for pathogenic viruses. UV inactivation of $Q{\ss}$, T4 and lambda phages in actual secondary effluent was investigated, too. As a result, similar inactivation efficiency between $Q{\ss}$ phage and E.coli was observed during UV treatment, while $Q{\ss}$ phage showed higher resistance to UV/$H_2O_2$ than E.coli. $Q{\ss}$ phage resistance to UV or UV/$H_2O_2$ does not reflect those of all pathogenic viruses. However, the result tells that the use of E.coli inactivation efficiency in evaluating microbiological safety of water could not always ensure the sufficient safety from pathogenic viruses. Meanwhile, $Q{\ss}$ phage showed less resistance to UV than T4 and lambda phages, indicating that the use of $Q{\ss}$ phage as an indicator virus may bring insufficient disinfection effectiveness by causing the introduction of lower UV dose than required. Consequently, it can be thought that T4 or lambda phages would be more desirable indicators in ensuring the sufficient disinfection effectiveness for various pathogenic viruses.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.45-55
• /
• 1996

Although the Dongjin Au-Ag-Cu mine had been abandoned since about forty years ago, the results of this study on the dispersion patterns and contamination level of heavy metals in the hydrologic system flowing via the waste rump show that the environmental impacts from the mine wastes are still significant. The stream water in the vicinity of the waste rump is severely acidified (pH 3.8 to 4.4) and highly enriched in various dissolved heavy metals. The heavy metal contents of the stream water and stream sediments are systematically attenuated with increasing distance from the mine area. However, it is worth to note that continuous attenuation of heavy metal contents in both media were reenriched in downstream area more than 800 m apart from the mine because it can be acted as a secondary source of heavy metal pollution. The heavy metals, especially Cd, Cu and Zn of polluted downstream sediments mainly occur in Fe-Mn oxides and organic materials, which indicates that these elements are the main pollutants from the waste rump of the Dongjin mine. The heavy metal contents of crops, such as sesame, perilla, red Pepper and brown rice, collected from the polluted farm land in the downstream area are lower than those of land plants from stream sides, but significantly higher in Cd, Cr, Cu and Zn than those from the unpolluted farm land. Especially, almost all of the crops in polluted farm land have been severly contaminated by Cd (>0.4 ppm). On the other hand, the heavy metal contents of the crops collected from refreshed farm land by means of a soil addition method shows significantly lowered level comparing with those of polluted area, which indicates that a soil addition method was effective for the refreshment of polluted farm land by toxic metallic pollutants. Wormwoods from this area showed very high contents in a11 the heavy metals even in unpolluted area (Cd > 1 ppm, Cr > 1 ppm, Cu > 11 ppm, Pb> 4 ppm, Zn > 55 ppm), indicating that a special caution must be payed when one takes ingest them.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.10a
• /
• pp.1-11
• /
• 2003

The objectives of this paper are to overview present status of soil pollution in Korea, to review the current policies and management strategies for soil pollution prevention and remediation of contaminated sites, and to suggest some recommendations to be considered toward more efficient policies. Soils in Korea are contaminated mainly by industrial facilities, landfills, underground storage tanks, abandoned/inactive mines, military camps, and other sources. Concentrations of most of soil pollutants were similar to the background levels, except for a few heavily contaminated sites such as industrial sites or abandoned/inactive mines. The Soil Environment Conservation Act (SECA), which was effective from 1995, provides a comprehensive legal framework for both preventing soil pollution and remedying contaminated sites in Korea. The Act includes various management policies such as the designation of standards and soil pollution policy area, soil monitoring networks, management of suspected contamination sources, and extended 'polluter-pays' principle. To make current policies more efficient and reasonable, some policies or strategies such as the establishment of national priority list, more detailed standards, risk-based cleanup goal, fund raise, soil erosion problem, and finally, integrity between soil and groundwater management frameworks may need to be pursued in the long term.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.12-27
• /
• 2004

The contamination pattern of indoor air was simulated when groundwater dissolving benzene was used for household activities. Indoor exposure scenario consisted of inhalation, ingestion, and dermal absorption. Physiologically based pharmacokinetic (PBPK) model was used to analyze how benzene exposed to human body was distributed in internal organs. Main exposure pathways contributing total internal dose were inhalation and ingestion while the contribution of dermal absorption was very small. Man showed higher exposure rate than woman due to his higher breath rate. For a short-term exposure, benzene concentration in venous blood of SPT, RPT and liver changed rapidly while slowly did in venous blood of adipose tissue at a low concentration. For a long-term exposure, woman accumulated about 2.1 times higher than man. Most of benzene exposed to human body was removed by exhalation and metabolism at lung and liver, respectively. For inhalation and ingestion, the benzene removals by exhalation were 69.8 and 48.4%, respectively. Relative importance of removal mechanism was different according to the inflow displacement of benzene. The results obtained from this study would help understand exposure, distribution, and removal phenomena and make plans for the reduction of the health risk associated with the contaminated groundwater by various organic compounds.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.128-135
• /
• 1995

Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.