• ETRI Journal
• /
• 제34권4호
• /
• pp.511-517
• /
• 2012

The best linear unbiased estimator (BLUE) is most suitable for practical application and can be determined with knowledge of only the first and second moments of the probability density function. Although the BLUE is an existing algorithm, it is still largely unexplored and has not yet been applied to channel estimation in amplify and forward (AF)-based wireless relay networks (WRNs). In this paper, a BLUE-based algorithm is proposed to estimate the overall channel impulse response between the source and destination of AF strategy-based WRNs. Theoretical mean square error (MSE) performance for the BLUE is derived to show the accuracy of the proposed channel estimation algorithm. In addition, the Cram$\acute{e}$r-Rao lower bound (CRLB) is derived to validate the MSE performance. The proposed BLUE channel estimation algorithm approaches the CRLB as the length of the training sequence and number of relays increases. Further, the BLUE performs better than the linear minimum MSE estimator due to the minimum variance characteristic exhibited by the BLUE, which happens to be a function of signal-to-noise ratio.

• 천문학논총
• /
• 제18권1호
• /
• pp.75-79
• /
• 2003

The characteristics of the BOES (Bohyunsan Observatory Echelle Spectrograph) CCD camera is presented. In order to get optimum gain and readout noise of the CCD, we examine the variation of the gain and readout noise by changing the value of output drain voltage of the CCD and measuring the gain using transfer curve, which is defined as the plot of variance versus mean exposure level of a homogeneous light onto the CCD surface. The gain and readout noises are optimised to be 0.5e$^-$/ADU and 3e$^-$, which is good for highest signal-to-noise ratio and contrast for the low light level characteristics of the BOES. We also measure the dark count of the CCD by getting five dark images with 3600 seconds exposure time. The mean dark count from median stacked dark images is essentially zero. A table of positions of defected pixels is also presented.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.1-5
• /
• 2009

This investigation is applied Taguchi method and the analysis of variance(ANOVA) to the reactive ion etching(RIE) characteristics of $SiO_2$ film coated on a wafer with Experimental Analysis and Optimization of $CF_4/O_2$ Plasma Etching Process mixture. Plans of experiments via nine experimental runs are based on the orthogonal arrays. A $L_9$ orthogonal array was selected with factors and three levels. The three factors included etching time, RF power, gas mixture ratio. The etching rate of the film were measured as a function of those factors. In this study, the etching thickness mean and uniformity of thickness of the RIE are adopted as the quality targets of the RIE etching process. The partial factorial design of the Taguchi method provides an economical and systematic method for determining the applicable process parameters. The RIE are found to be the most significant factors in both the thickness mean and the uniformity of thickness for a RIE etching process.

• 대한간호학회지
• /
• 제39권1호
• /
• pp.95-106
• /
• 2009

Purpose: The purposes of this study were to explore the functional status of elderly residents and to analyze time use, and finally identify factors to predict nursing care needs in relation to functional status and health related variables. Methods: In this study a descriptive-correlational design was used. Functional status of participants was obtained through interviews, and nursing care time was examined using a 1 min time-motion study with a standardized instrument developed by Korea Long-Term Care Planning Committee (2005). Results: The mean total functional score was 65 (range 28-125) and mean total nursing care time was 144.15 min per day. There were significant positive relationships between total nursing care time, marital status, back pain, dementia, and vision impairment. Multiple regression analyses showed that a liner combination of number of illnesses, types of primary disease, ADL, IADL, cognitive function, nursing demand, and rehabilitation demand explained 42.8% of variance of total nursing time. ADL (${\beta}$=-.533) was the most significant predictor of nursing service need. Conclusion: Identifying factors that result in variations of service need has implications for adequate nursing service, estimation of optimum nurse to patient ratio, quality of care and patient safety.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 추계학술대회
• /
• pp.167-170
• /
• 2010

잡음 분산 값은 SNR(signal-to-noise ratio) 추정이나 MMSE(minimum mean square error) 계산, 채널 임펄스 응답의 추정 등에 사용되는 중요한 파라미터이다. 채널이 시간에 따라 변하는 무선 통신 환경에서, 신호와 섞여 있는 잡음과 간섭 신호의 정확한 추정에는 그 한계가 있으며 이로 인해 발생하는 추정 오차는 수신기의 데이터 검출 성능을 저하시킨다. 훈련열을 이용하여 채널을 추정하였을 경우 추정된 채널 임펄스 응답 신호 중 다중 경로 신호는 소수에 불과하고 나머지 대부분의 계수는 잡음 성분만을 포함하는 신호이다. 이러한 특징을 이용하여 채널의 추정 계수로 잡음 분산을 추정하는 방법이 기존에 제시되어 있다. 여기서 제안하는 알고리즘은 기존 알고리즘인 PSA(partial sample average)와 비교해 연산량에서 차이가 거의 없이 구현되며, 3GPP TDD[1]에서의 모의 실험을 통하여 기존 알고리즘보다 더 정확한 분산 값을 찾아냄을 확인하였다.

• Communications for Statistical Applications and Methods
• /
• 제22권6호
• /
• pp.639-646
• /
• 2015

We propose simultaneous tests for mean and variance under the normality assumption. After formulating the null hypothesis and its alternative, we construct test statistics based on the individual p-values for the partial tests with combining functions and derive the null distributions for the combining functions. We then illustrate our procedure with industrial data and compare the efficiency among the combining functions with individual partial ones by obtaining empirical powers through a simulation study. A discussion then follows on the intersection-union test with a combining function and simultaneous confidence region as a simultaneous inference; in addition, we discuss weighted functions and applications to the statistical quality control. Finally we comment on nonparametric simultaneous tests.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.198-206
• /
• 1999

An automobile outside rear view mirror system has been analyzed and designed to reduce vibration with a finite element model. model analysis is conducted for the calculation of natural frequencies. harmonic analysis is utilized to estimate the displacements of the glass surface under dynamic loads. The model is verified with the vibration experiment of the parts and the assembled body. The structure of the mirror system is optimized for the robustness defined by the Taguchi concept. At first, many potential design variables are defined. Final design variables are selected based on the amount of contribution on the objective function. That is, sensitive variables are chose. The SN ratio in the Taguchi method is replaced by an objective function with the mean and the standard deviation of the quality characteristic. The defined objective function is appropriate in the structural design in that the vibration displacements are minimized while the robustness is improved.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.749-764
• /
• 2003

In this paper we explain that normal theory likelihood-ratio tests(z, t, $x^2$. F) for mean(s) or variance(s) can be geometrically related to volume of difference of two joint pdf's. One is an estimated joint pdf under null parameter space $\omega$ and the other is an estimated joint pdf under full parameter space $\Omega$. For explanations, ‘distance between two distributions’ is defined. We study properties of it, and derive some results on the distance between two multivariate normal distributions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1362-1365
• /
• 2003

On this study. we improved the efficiency applying algorithm that is repeatedly using orthogonal array in discrete design space and filling a defect of gradient method in continuous design space. we showed optimal ply angle that maximized buckling strength of CFRP laminated composite plate without a hole and with a hole by each aspect ratio. In the case of CFRP laminated composite plate without a hole, we confirmed the reliance and efficiency of algorithm in comparison with the result optimization achievement repeatedly using statistical orthogonal array of experimental design.

• Journal of applied mathematics & informatics
• /
• 제30권1_2호
• /
• pp.135-145
• /
• 2012

Traditionally, ERM (Equivalent Random Method) is used to determine number of circuits in an overflow circuit group with rough traffic which has vmr(variance to mean ratio) greater than one. Recently, IPP(Interrupted Poisson Process) approximate method which represents the collective feature of the overflow has been introduced. The negative binomial loss formula can be applied to determine the required number of circuits in the overflow circuit group. In this paper, we deal with the negative binomial loss formula and determination method of number of circuits. We also analyze and compare these three loss formulas.