• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.528-535
• /
• 1988

This paper presents a constructing theory of variable arithmetic operation systems for computing multiplications and multiplicative inverse in GF(2**m) based on a modulo operation of degree on elements in Galois fields. The proposed multiplier is composed of a zero element control part, input element conversion part, inversion circuit, and output element conversion part. These systems can reduce reasonable circuit areas due to the common use of input/output element converison parts, and the PLA and module structure provice a variable property capable of convertible uses as arithmetic operation systems over different finite fields. This type of designs gives simple, regular, expandable, and concurrent properties suitable for VLSI implementation. Expecially, the multiplicative inverse circuit proposed here is expected to offer a characteristics of the high operation speed than conventional method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.249-252
• /
• 1997

In this paper the sway-control problem of a container crane is investigated in the perspective of controlling an underactuated mechanical system. For fast loading/unloading of containers from the ship, quick suppression of the remaining swing motion of the container at the end of each trolley stroke is crucial. Known nonlinearities are fully incorporated by feedback linearization. Robustness is enhanced by variable structure control. Compared with the linear LQ control, much better performance can be obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.519-523
• /
• 1993

In this paper, the variable structure model following control scheme is proposed for the nonlinear robot manipulator system. The proposed control system guarantees that the system state is in the sliding mode for all time. Therefore, error transient can be prescribed in advance for all time. Furthermore, overall system is globally exponentially stable. Chattering problem is reduced by the introduction of a boundary layer. Simulation results are given to show the usefulness of the proposed control scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.419-422
• /
• 1996

In this paper, we consider variable structure controller design of a active magnetic bearing(AMB). In particular, we design a switching hyperplane, considering coupling characteristic among each magnet. This method is designed by applying decentralized control method. Controller design consist of two factors that is, one is linear control part to drive state variables to zero asymptotically and the other is a nonlinear controller part to maintain within neighborhood of switching hyperplane. Finally, A control method designed here is checked by simulation, which shows good results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.383-386
• /
• 1996

In this paper, we propose a design method and control law for plannar type two-link flexible manipulator. In designing flexible links, we use Rayleigh's principle. To control flexible manipulator, input distribution controller is used, which is primarily on the basis of nonlinear variable structure control(VSC). The simulation results are also shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.173.3-173
• /
• 2001

In this paper, attitude control of autonomous system using bike based on variable structure control is discussed. Variable structure control is more than a promising technique in the field of nonlinear control. It permits the realization of very robust and simple regulators, with appealing sliding mode characteristics especially if the considered dynamics requires a very short sampling time. We derive dynamic equation of it and demonstrate that the designed controller stabilizes attitude simultaneously regardless of wheel position by computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1066-1071
• /
• 1992

A new scheme of OFVSC(Output Feedvack Variable Structure Controller) is proposed for the servo control system. The main structure of proposed control scheme is composed of servo compensator and dynamic switiching function. By the use of dynamic switiching function the assumption of full state availability can be removed and the disturbances which does not satisfy the matching condition cna be rejected. And the servo compensator which is designed for each output variable the robustness for the all type of disturbances. And the performances of proposed control system are evaluated through simulation studies for a numerical example.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.267-270
• /
• 1995

In this paper, a variable structure control scheme with a terminal sliding mode is proposed for robot manipulators. The proposed control scheme guarantees that the output tracking error converges to zero in finite time, and the overall system shows robust property against parametric uncertainties and external disturbances all the time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.155-160
• /
• 1990

This paper presents the new VSMFC (variable structure model following control) algorithm of a system with parameter uncertainty. In contrast to the conventional approach, continuous control inputs am used instead of discontinous ones and modified reachability condition for sliding mode reduces a reaching phase and a newly proposed sliding surfaces are used for the robust control of uncertain system.