• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.135-139
• /
• 2014

수소화기상증착에피탁시로 성장된 GaN 단결정의 표면 특성을 정밀하게 측정하기 위해, 용융 KOH/NaOH 습식화학에칭법을 적용하였다. KOH/NaOH 습식화학에칭법에 에칭속도는 기존의 황산, 인산과 같은 etchant에 비해 느린데, 이는 불용성 코팅층의 형성에 의한 것이다. 따라서 이 방법으로 etch pits density를 더 효율적으로 평가할 수 있었다. 성장된 GaN 단결정을 XRD(X-Ray Diffraction), XRC(X-ray rocking curve)로 결정성을 분석하였으며, 에칭 특성과 표면 형상은 주자전자현미경을 이용하여 관찰하였다. 에칭 실험 결과 격자결함들이 독립적으로 잘 분리되어 있고 그들의 형태가 명확하게 나타나는 최적 에칭 조건은 $410^{\circ}C$, 25분이었다. 이 조건에서 얻은 결함밀도 값은 $2.45{\times}10^6cm^{-2}$이었으며, 이는 상업적으로 이용 가능 한 정도의 재료임을 확인할 수 있었다.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.261-264
• /
• 2012

본 연구에서는 HVPE법으로 사파이어 기판(0001) 위에 성장시킨 GaN epilayer의 etching에 따른 표면변화 특성을 조사하였다. 주사전자 현미경(SEM) 관찰 결과, 3가지 형태를 갖는 육각형 모양의 etch pit(edge, screw, mixed) 들이 GaN epilayer의 두께 변화에 따라서 형성되었다. 이러한 관통전위들은(TDs) epilayer의 두께가 얇고, etch pit density가 높을수록 screw and mixed type TDs이 많이 관찰되었고, 두께가 증가할수록 etch pit density가 낮아지면서 edge and mixed type TDs들이 주로 존재하는 것을 관찰 할 수 있었다.

• 센서학회지
• /
• 제7권1호
• /
• pp.73-82
• /
• 1998

실리콘 표면 미세가공에 있어서, 새로 개발된 HF 기상식각 공정은 미소구조체들을 띄우는데 매우 효과적임을 입증하였다. 무수 불화수소와 메탄올을 이용한 기상식각 시스템에 대한 기능 및 특성을 기술하였고, 실리콘 미세구조체룰 띄우기 위한 회생층 산화막들의 선택적 식각특성이 고찰되었다. 구조체층으로는 인이 주입된 다결정실리콘이나 SOI 기판의 단결정실리콘을 사용하였다. 회생층으로는 TEOS 산화막, 열산화막, 저온산화막을 사용하였다. 기존 습식식각과 비교해 볼 때, 공정에 기인된 고착현강이나 잔류물질이 없는 미세구조체를 성공적으로 제작하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.48-48
• /
• 2011

We have developed a chemically-driven top-down approach using vapor phase HCl to form various GaN nanostructures and successfully demonstrated dislocation-free and strain-relaxed GaN nanostructures without etching damage formed by a selective dissociation method. Our approach overcomes many limitations encountered in previous approaches. There is no need to make a pattern, complicated process, and expensive equipment, but it produces a high-quality nanostructure over a large area at low cost. As far as we know, this is the first time that various types of high-quality GaN nanostructures, such as dot, cone, and rod, could be formed by a chemical method without the use of a mask or pattern, especially on the Ga-polar GaN. It is well known that the Ga-polar GaN is difficult to etch by the common chemical wet etching method because of the chemical stability of GaN. Our chemically driven GaN nanostructures show excellent structure and optical properties. The formed nanostructure had various facets depending on the etching conditions and showed a high crystal quality due to the removal of defects, such as dislocations. These structure properties derived excellent optical performance of the GaN nanostructure. The GaN nanostructure had increased internal and external quantum efficiency due to increased light extraction, reduced strain, and improved crystal quality. The chemically driven GaN nanostructure shows promise in applications such as efficient light-emitting diodes, field emitters, and sensors.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.298-305
• /
• 1995

Copper-indium diselenide, $CuInSe_2$, thin films have been fabricated by selenizing Cu/In stacked layers with different sputtered Cu/(Cu+ln) mole ratios at 450.deg. C for 1hr on alumina substrates. The selenium source was selenium vapor. Microstructure, crystallization, and composition of the selenized $CuInSe_2$ films were examined by using scanning electron microscope, X-ray diffraction, Auger electron spectroscopy, and secondary ion mass spectrometry. Electrical resistivity and hall effects were also measured to investigate the electrical properties. As the sputtered Cu/(Cu+In) mole ratio of In/Cu layer increased, the amounts of void and CuSe phase in the selenized films increased but the composition of $CuInSe_2$ phase was the same regardless of the sputtered mole ratio. Comparing the electrical properties of $CuInSe_2$ thin film before and after the chemical etching, it was seen that the electrical resistivity, carrier concentration, and carrier mobility of the selenized films were affected by the amount of CuSe phase which seemed to increase primarily the hole concentration of the selenized films.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.18-23
• /
• 1995

광도파로와 반도체 광증폭기를 직접하여 1.3$\mu$m 과장대에서 동작하는 2x2 InGaAsP/InP LD-gate형 광스위치를 제작하였다. 광스위치의 특성으로 광섬유 입출력간의 총삽입 손실이 6~10dB 이었고, 소광비가 40dB 이상으로서 세계적인 수준의 양호한 결과를 얻었다. 제작된 광스위치는 광도파로와 반도체 광증폭기 간의 높은 광 결합 효율을 얻기 위하여 RIE(Reactive Ion Etching) 에 의한 건식 식긱과 4회에 걸친 OMVPE(Organo Metallic Vapor Phase Epitaxy) 결정 성장을 이용하였으녀, 수동 도파로와 LD 사이의 광 결합 효율이 '90% 이상이 됨을 확인하였다. d;라힌 결과는 광집적화의 연구에 상당한 기에를 할 것으로 기대된다.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.88-94
• /
• 2014

The structural, optical and electrical properties of sputter-deposited CIGS films were directly influenced by the sputtering process parameters such as substrate temperature, working pressure, RF power and distance between target and substrate. CIGS thin films deposited by using a quaternary target revealed to be Se deficient due to Se low vapor pressure. This Se deficiency affected the overall stoichiometry of the films, causing the films to be Cu-rich. Current tends to pass through the Cu-Se channels which act as the shunting path increasing the film conductivity. The crystal structure of CIGS thin films depends on the substrate orientation due to the influence of surface morphology, grain size and stress of Mo substrate. The excess of Cu was removed from the CIGS films by KCN treatment, achieving a suitable Cu concentration (referred as Cu-poor) for the fabrication of solar cell. Due to high Cu concentrations on the CIGS film surface induced by Cu-Se phases after CIGS film deposition, KCN treatment proved to be necessary for the fabrication of high efficiency solar cells. Also during KCN treatment, dislocation density and lattice parameter decreased as excess Cu was removed, resulting in increase of bandgap and the decrease of conductivity of CIGS films. It was revealed that Cu-Se secondary phase could be removed by KCN wet etching of CIGS films, allowing the fabrication of high efficiency absorber layer.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.153-159
• /
• 1997

A thermally-driven polysilicon microactuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS(tetraethylorthosilicate) oxide as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And newly developed HF GPE(gas-phase etching) process was also employed to eliminate the troublesome stiction problem using anhydrous HF gas and CH$_{3}$OH vapor, and successfully fabricated the microactuators. The actuation is incurred by the thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon microactuator was experimentally conformed as large as 21 .mu. m at the input voltage level of 10V and 50Hz square wave. The actuating characteris- tics are also compared with the simulalted results considering heat transfer and thermal expansion in the polysilicon layer. This microactuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as microrelay, which requires large displacement or contact force but relatively slow response.

• 공업화학
• /
• 제10권3호
• /
• pp.343-348
• /
• 1999

저온 공정이 가능한 rf-plasma를 이용한 화학증착법으로 기판의 온도, 출력, $SiH_4$와 천음 함유한 유기화합불 진구체의 희석비 등을 변수로 각 실험 조건에 따라 iron silicide를 제조하였다. 일반적으로 iron silicide 막은 다단계 공정의 Ion Beam Synthesis (IBS)법으로 성장시키고 있으나, 플라즈마를 사용함으로써 단일공정에 의해 $Fe_aSi_bC_cH_d$로 결합된 iron silicide 및 ${\beta}$-상이 형성될 수 있음을 확인하였다. 철 전구체와 실란 (silane)의 희석비에 따라 막 내에 존재하는 탄소와 수소양의 차이로 인해 서로 다른 막의 특성을 나타내었다. 기관의 온도에 따른 광학에너지갭 ($E_b^{opt}$)은 박 표면에 존재하는 수소가 탈착되면서 제공할 수 있는 활성점이 한정되어 있기 때문에 큰 변화가 없었다. 240 watt 이하의 출력에서는 광학에너지갭이 감소하였고, 240 watt 이상의 높은 출력에서는 식각에 의해 미결합수가 증가하여 광학에너지갭은 높게 나타났다.

• 한국표면공학회지
• /
• 제42권5호
• /
• pp.216-219
• /
• 2009

A surface acoustic wave (SAW) filter structure was fabricated employing $4{\mu}m$ thick nanocrystalline diamond (NCD) and $2.2{\mu}m$ thick ZnO films on Si wafer. The NCD film was deposited in an $Ar/CH_4$ gas mixture by microwave plasma chemical vapor deposition method. The ZnO film was formed over the NCD film in an RF magnetron sputter using ZnO target and $Ar/O_2$ gas. On the top of the two layers, copper film was deposited by the RF sputter and inter digital transducer (IDT) electrode pattern (line/space : $1.5/1.5{\mu}m$) was defined by the photolithography including a lift-off etching process. The fabricated SAW filter exhibited the center frequency of 1.66 GHz and the phase velocity of 9,960 m/s, which demonstrated that a giga Hertz SAW filter can be realized by utilizing the nanocrystalline diamond thin film.