• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.74-80
• /
• 2023

Gallium oxide (Ga₂O₃) thin films were grown on c-, a-, m-, r-plane sapphire substrates using a mist chemical vapor deposition system. Various growth temperature range of 400~600℃ was applied for Ga₂O₃ thin film deposition. Then, several structural properties were characterized such as film thickness, crystal phase, lattice orientation, surface roughness, and optical bandgap. Under the certain growth temperature of 500℃, all grown Ga₂O₃ featured rhombohedral crystal structures and well-aligned preferred orientation to sapphire substrate. The films grown on c-and r-plane sapphire substrates, showed low surface roughness and large optical bandgap compared to those on a-and m-plane substrates. Therefore, various sapphire orientation can be potentially applicable for future Ga₂O₃-based electronics applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2007

The structural and morphological properties of planar, nonpolar (11-20) a-plane GaN layers grown by hydride vapor phase epitaxy on (1-102) r-plan sapphire substrates are characterized. We report on the effect of low temperature ($500/550/600/660^{\circ}C$) AIN buffer layers on the structural properties of HVPE grown a-GaN kayers. and for the comparison, low temperature GaN and InGaN buffer layers are also tried for the growth of a-plane GaN layers. The structural geometry of a-GaN layers is severely affected on the growth condition of low temperature buffer layers. The most planar a-GaN could be obtained with $GaCl_3$ pretreatment at the growth temperature of $820^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2009

In this study, we performed growth of InGaN/GaN multi quantum well (MQW) structures on semi-polar (1-10]) GaN facet on 8-degree off oriented stripe patterned (100) Si substratcs by MOVPE. The structural and optical properties of the InGaN/GaN multi quantum well (MQW) structures grown on (1-101) GaN stripe depend on $NH_3$ flow rate, TMI flow rate and growth temperature are characterized by cathodoluminescence (CL) and scanning electron microscopy (SEM). With the decrease of $NH_3$ flow rate, the threading dislocation of (1-101) GaN is considerably reduced. We could control the transition wavelength of InGaN/GaN MQW structures from 391.5 nm to 541.2 nm depend on the growth conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.162-165
• /
• 2006

The selective growth of InCaN/AlGaN light emitting diodes was performed by mixed-source hydride vapor phase epitaxy (HVPE). In order to grow the InGaN/AlGaN heterosturcture consecutively, a special designed multi-sliding boat was employed in our mixed-source HVPE system. Room temperature electroluminescence spectum of the SAG-InGaN/AlGaN LED shows an emission peak wavelength of 425 nm at injection current 20 mA. We suggest that the mixed-source HVPE method with multi-sliding boat system is possible to be one of the growth methods of III-nitrides LEDs.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.820-832
• /
• 1986

In contrast to conventional liquid phase epitaxy of GaAs, surface kinetics limited growth is predominant in selective liquid phase epitaxy. For the stripe openings in the high-index crystal-lographic directions, the well-known facet formations and the decompositions into the low index planes or smooth circular surfaces are observed depending on the growth kinetics. For the low index direction stripe, surface kinetics limited growth is evident. By a numerical calcualtion we show that these phenomena are due to the enhanced masstransport by two dimensional diffusion and growth rate anisotropy which is found to be very stdrong with cusped minima for some singular planes in the solution growth as well as in vapor phase epitaxy. Morphological stability is briefly treated in terms of diffusion and its implications on device application are stated. Tese phenomena may be common to III-V compound semiconductors as well as GaAs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.799-802
• /
• 2011

In this study, SiC single-crystal ingots were prepared on two seed crystals with different doping level by using the physical vapor transport (PVT) technique; then, SiC crystal wafers sliced from the grown SiC ingot were systematically investigated to find the effect of seed doping level on the doping concentration and crystal quality of the SiC. To exclude extra effects induced by adjustment of the process parameters, we simultaneously grew the SiC crystals on two seed crystals with different level, which were fabricated from previous two SiC crystal ingots.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.101-104
• /
• 2008

GaN films were grown on the vertical and horizontal reactors by the hydride vapour phase epitaxy (HVPE). The structural and optical characteristics of the GaN films were investigated depending on the reactor-type. GaN epilayers were characterized by double crystal X-ray diffraction (DC-XRD), transmission electron microscopy (TEM) and photoluminescence (PL). Surface defects of two kinds of the GaN films were revealed by the wet chemical etching method, using $H_3PO_4$ acid at $200^{\circ}C$ for 8 minutes. Hexagonal etch pits were analyzed by optical microscopy and SEM. Etch pit densities were calculated to be approximately $1.4{\times}10^7$ and $1.2{\times}10^6\;cm^{-2}$ for GaN layers grown on horizontal and vertical reactors, respectively. Those results show GaN grown in the vertical reactor having a better quality of optical properties and crystallinity than that in the horizontal reactor.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.20-22
• /
• 1999

The effect of dopant and stoichiometry on the physical and optical properties of $LiNbO_{3}$ were studied. We prepared three samples, undoped, MgO doped $LiNbO_{3}$ with congruent composition and near-stoichiometric $LiNbO_{3}$. Dielectric constant and transmittance in UV/VIS/IR light range were measured. The results showed that the features for high [Li]/[Nb] were similar to those for low [Li]/[Nb] but with high [Mg].

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.4
• /
• pp.159-167
• /
• 2022

In the past few decade years, laboratory-grown diamonds, also known as synthetic diamonds usually, have become more and more prosperous in the global diamond market. There are two main crystal growth processes of the gem-quality laboratory-grown diamond, the high pressure and high temperature (HPHT) and chemical vapor deposition (CVD). Synthetic gem diamonds grown by the HPHT press have been commercially available since the mid-1990s. Today, significant amounts of gem-quality colorless HPHT laboratory-grown diamonds have been producing for the jewelry industry. In the last several years, the CVD laboratory-grown diamonds have been gaining popularity in the market. In 2021, the CVD production rose and there are expectations that the trend would move upward continuously. This article presents information about the current status of laboratory-grown diamonds, lower cost compared to natural diamonds, market share, color distribution, spectroscopic properties of laboratory-grown diamonds, and so on.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.45-50
• /
• 2015

Compositionally graded AlGaN epilayer was grown by HVPE (hydride vapor phase epitaxy) on (0001) c-plane sapphire substrate. During the growth of graded AlGaN epilayer, the temperatures of source and the growth zone were set at $950^{\circ}C$ and $1145^{\circ}C$, respectively. The growth rate of graded AlGaN epilayer was about 100 nm/hour. The changing of Al contentes was investigated by field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDS). From the result of atomic force microscope (AFM), the average of roughness in 2 inch substrate of graded AlGaN epilayer was a few nanometers scale. X-ray diffraction (XRD) with the result that the AlGaN (002) peak ($Al_{0.74}Ga_{0.26}N$) and AlN (002) peak were appeared. It seems that the graded AlGaN epilayer was successfully grown by the HVPE method. From these results, we expect to use of the graded AlGaN epilayer grown by HVPE for the application of electron and optical devices.