• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.79-89
• /
• 1999

A quantitative fit test, condensation nuclei counting (Portacount 8025, TSI), was performed concurrently with a banana oil (isoamyl acetate: IAA) qualitative fit test (MSA) to evaluate reliability on IAA QLFT and correlation between two methods. One brands of quarter mask (3M model 7500 medium) was prepared for QLFT with HEPA filter and gas & vapor removing media, i.e., combination cartridge. 110 subjects (65 male, 45 female) were fit tested QNFT and QLFT each three times. For a wearer combination having a FF<10, as determined by CNC QNFT, the point es timate (${\beta}$-error) of the probability of that combination not being rejected by the banana oil QLFT was found to be 0.0 with 95% confidence that this statistic is not expected to exceed 0.15. For a wearer combination having a FF<100, as determined by CNC QNFT, the point estimate of the probability of that combination not being rejected by the banana oil QLFT was found to be 0.07 with 95% confidence that this statistic is not expected to exceed 0.13. The uncertainty associated with each estimate, however, is large due to the small number of study subjects with inadequately fitting respirators.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2003년도 하계학술대회 논문집
• /
• pp.143-143
• /
• 2003

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 추계학술대회
• /
• pp.332-334
• /
• 2012

본 연구는 우리나라 선박 및 항해와 관련된 항로표지 업무를 관장하기 위해 설치된 국가제도 등에 관한 기록들을 주요 역사서를 통해 살펴보고, 삼국시대부터 봉수(烽燧)와 봉화(烽火) 같은 횃불을 밝혀 선박의 안전항해를 돕기 시작하여 근대 이후에는 석유등, 아세틸렌가스등, 전기등, LED 광원을 등대광원으로 사용한 변천과정을 알아본다.

• 설비공학논문집
• /
• 제20권2호
• /
• pp.106-112
• /
• 2008

In this paper, the experimental results on evaporation heat transfer characteristics were reported for a micro-fin tube using $CO_2$. An experimental refrigerant loop had been established to measure the evaporation heat transfer coefficient and pressure drop of $CO_2$. Experiments were conducted for mass fluxes, heat fluxes, saturation temperatures and PAG oil concentrations. With increasing the heat flux and the saturation temperature, the evaporation heat transfer coefficient increased. At the higher mass flux, however, the exit vapor quality of the micro-fin tube was to be lower. The peak of the heat transfer coefficient was shifted toward low quality region. The evaporation pressure drop increased as the mass flux increased and the saturation temperature decreased. As PAG oil concentration increased, the evaporation heat transfer coefficient decreased and the dryout was delayed by oil addition.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.340-344
• /
• 2007

MCM-41 촉매를 이용하여 일본 낙엽송의 열분해 바이오 오일의 촉매 개질 반응을 수행하였다. MCM-41 촉매는 바이오 오일의 불안정성의 원인중 하나인 산소를 $H_2O$, CO, $CO_2$의 형태로 제거하여 개질 전의 오일보다 더 안정한 오일을 생성하였다. MCM-41 촉매는 무촉매 반응에 비해 경제적 가치가 높은 페놀류 화합물의 생성량을 증가시켰다. 특히 Si-MCM-41 촉매에 비해 산점의 양이 많은 Al-MCM-41의 경우 촉매 활성이 더 우수하였다. 또한 촉매와 일본 낙엽송을 직접 혼합한 것보다, 바이오 오일이 촉매층을 통과했을 때 더 나은 개질 결과를 얻을 수 있었다.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.583-589
• /
• 2016

VOCs(Volatile Organic Compounds)의 대부분은 유해물질로 대기 오염뿐만 아니라 지구 온난화의 원인물질로 작용하고 있다. 이로 인해 VOCs는 국가마다 배출을 줄이기 위해 정책적으로 관리되고 있다. 특히, 주유소에서 발생하는 유증기는 발암물질인 벤젠 등 인체에 유해하며 환경부에서 연료 주유 시 발생하는 휘발성 유기화합물을 회수할 수 있도록 유증기 회수장치 설치를 의무화하고 있다. 최근에는 기존의 유증기 처리 방식을 발전시켜 폭발이나 화재 등을 방지하기 위하여 유증기를 냉각시켜 현장에서 바로 회수하도록 하고 있다. 본 논문에서는 이러한 위험성이 존재하는 액화기의 상태를 실시간으로 모니터링 할 수 있도록 유증기 액화장치에 센서를 부착하여 액화기 측정 정보를 모니터링 할 수 있는 모니터링 서버 및 안드로이드 기반의 모니터링 앱 어플리케이션을 개발하여 원격관리 서비스 모델을 제시하고자 한다.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.78-84
• /
• 2001

This study deals with the heat-treatment technique of SM45C steel with respect to less of deformation in control. The whole process for the production of landing gear must go through with uniformally controlled heat treatment, where as most deformation usually occur in nonuniform cooling environment. When a heated metal is submerged into a certain quenchant, the rate of cooling rapidity can be measured rather slow during the early stage of the procedure due to an Occurrence of a vapor blanked. As the additional course of cooling action is applied and the vapor from a vapor blanked is destroyed simultaneously, the speed of cooling promptness can be considered rather swift. The object of this study is to control the certain deformations as in the procedure of a heat treatment for landing gear by analyzing and improving the conditions of different substance of quenching liquids. Several noticeable curves indicating the temperature variation on the ap-plied metals during the cooling procedures, along with detectable rates of water verses oil and that of different polymer solutions are illustrated.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.13-21
• /
• 2014

The object of this research is to perform the basic research for the development of selectively permeable membrane fabrics which is suitable for korean military in sense of embattlement. As a key factor of selectively permeable membrane fabrics which is suitable for korean military, this study selected the best PVA thickness and membrane selection for DMMP protection, pre-treatment method for conformational stability of face fabric and water/oil repellent process condition. Especially as the PVA coating thickness of the fabrics increase, peneration of DMMP decrease including water vapor permeation is lower. This study shows how physical features and permeability of chemical agents can be influenced by pre-treatment methods, the selection of selectively permeable membrane, the thickness of PVA etc. Results showed that outer shell / PVA / e-PTFE materials possessed performance with superior water vapor permeation (Over $3,000g/m^2/day$) and protective capability against DMMP vapor ($0.6{\mu}g/cm^2{\cdot}16hr$).

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.65-69
• /
• 2002

Unsteady vaporization of a droplet quiescent in a high pressure environment are studied with emphasis placed oil the modeling of equilibrium at vapor-liquid interface. Complete set of conservation equations for liquid and gas phases is numerically time integrated. Vapor-liquid interfacial thermodynamics are solved by f]ash equilibrium calculation method. The model was proper]y validated with experiment and the improvement in the solution accuracy was made. Vaporization of n-pentane fuel droplet in nitrogen background gas is examined. Effects of ambient gas solubility, property variation, transient diffusion, and multicomponent transport on the droplet vaporization are investigated systematically. High-pressure effects on the droplet vaporization is examined and discussed.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.453-465
• /
• 2014

본 논문에서는 바이오매스로부터 급속열분해를 통해 난방용, 발전용 및 수송용 연료로 사용하기 위해 바이오오일을 생산하는 기술개발 현황을 나타내었다. 바이오매스를 작은 규모의 액체연료로 전환하기 위해 가장 효율적인 방법 중 하나는 급속열분해이다. 급속열분해를 통한 바이오오일은 $450^{\circ}C{\sim}600^{\circ}C$ 온도에서 바이오매스가 신속히 열분해 되어 증기 급냉를 위해 외부 산소가 없는 조건에서 생산된다. 이 바이오오일은 최초 건조 바이오매스 기준 최대 75 무게%까지 생산할 수 있지만, 일반적으로 60-75 무게% 수준이 적합하다. 본 연구에서는 바이오매스의 원료특성, 바이오오일 생산원리, 바이오오일의 특성 및 활용분야에 대한 최근의 개발현황을 살펴보았다.