• 한국재료학회지
• /
• 제31권3호
• /
• pp.139-149
• /
• 2021

In this study, three kinds of bainitic steels are fabricated by controlling the contents of vanadium and boron. High vanadium steel has a lot of carbides and nitrides, and so, during the cooling process, acicular ferrite is well formed. Carbides and nitrides develop fine grains by inhibiting grain growth. As a result, the low temperature Charpy absorbed energy of high vanadium steel is higher than that of low vanadium steel. In boron added steel, boron segregates at the prior austenite grain boundary, so that acicular ferrite formation occurs well during the cooling process. However, the granular bainite packet size of the boron added steel is larger than that of high vanadium steel because boron cannot effectively suppress grain growth. Therefore, the low temperature Charpy absorbed energy of the boron added steel is lower than that of the low vanadium steel. HAZ (heat affected zone) microstructure formation affects not only vanadium and boron but also the prior austenite grain size. In the HAZ specimen having large prior austenite grain size, acicular ferrite is formed inside the austenite, and granular bainite, bainitic ferrite, and martensite are also formed in a complex, resulting in a mixed acicular ferrite region with a high volume fraction. On the other hand, in the HAZ specimen having small prior austenite grain size, the volume fraction of the mixed acicular ferrite region is low because granular bainite and bainitic ferrite are coarse due to the large number of prior austenite grain boundaries.

• 자원리싸이클링
• /
• 제30권4호
• /
• pp.54-63
• /
• 2021

SCR 탈질 폐촉매로부터 바나듐과 텅스텐은 소다배소-수침출 공정을 통해 얻은 침출액으로부터 분리/회수하여 얻을 수 있다. 본 연구에서는 강염기성 음이온교환수지인 Lewatit monoplus MP 600을 사용하여 연속식 이온교환칼럼에서 수용액에 용해되어 있는 바나듐과 텅스텐의 흡·탈착 거동을 알아보고, 바나듐/텅스텐 분리를 위한 연속식 이온교환칼럼 운전조건을 제시하고자 하였다. 수용액 pH 8.5에서 단일 성분 수용액으로 연속식 흡착실험을 수행한 결과, 흡착용량은 바나듐 44.75 mg/(g of resin)과 텅스텐 64.92 mg/(g of resin)으로 바나듐보다 텅스텐의 흡착용량이 크게 나타났으며 이는 이온교환수지에 흡착되는 이온의 전하수가 바나듐 보다는 텅스텐이 작기 때문이라고 사료된다. 텅스텐이 흡착된 이온교환수지에 바나듐 함유 수용액이 공급됨에 따라 이온교환수지에 흡착되었던 텅스텐이 바나듐과 교환되며 탈착되는 거동을 보였으며, 이로부터 MP 600에 대하여 바나듐이 텅스텐보다 친화도(affinity)가 높음을 알 수 있었다. SCR 탈질 폐촉매 침출액과 동일한 농도의 바나듐과 텅스텐 혼합용액으로 pH 8.5에서 연속식 실험을 수행한 결과 바나듐의 흡착 용량은 48.72 mg/(g or resin)으로 공급량의 80%가 흡착된 반면 텅스텐의 경우 이온교환수지에 흡착된 양이 거의 0에 근접하며 바나듐과 텅스텐의 분리가 효과적으로 이루어졌다. 바나듐이 흡착된 이온교환수지로부터 2M HCl를 15 mL/h로 공급하여 97.7%의 바나듐을 99%의 순도로 탈착시킬 수 있었다. 탈착용액으로부터 염화암모늄을 침전제로 사용하여 90℃에서 암모늄폴리바나데이트 형태로 93%의 바나듐을 회수하였다.

• Nuclear Engineering and Technology
• /
• 제2권4호
• /
• pp.279-287
• /
• 1970

An an element vanadium is most effective and next is noibium to strengthening the low carbon steels by small addition both on fine precipitation and five grain. The combination effect of vanadium plus niobium or vanadium plus molybdenum is much more effective than adding on element.

• 약학회지
• /
• 제46권6호
• /
• pp.441-447
• /
• 2002

It has been well known that vanadium shows various physiological and pharmacological properties such as an insulin-mimetic effect. In view of the reported toxic effects there is the problems that the safety margin is narrow because of its strong toxicity, Vanadate was tested for its ability to cause blood aggregation. Although vanadate or $H_2O$$_2$ alone had little effect on platelet aggregation, treatment of vanadate and $H_2O$$_2$ together induced platelet aggregation indicated that it was occurred by pervandate or hydroxyl radical produced from the reaction of vanadate and $H_2O$$_2$. It was dependent on extracellular $Ca^{2+}$ion. Platelet aggregation caused by vanadate and $H_2O$$_2$ was inhibited by ascorbic acid, tocopherol, catalase, mannitol, and Tiron. In contrast to vanadate, vanadium yeast prepared by uptaking vanadate in yeast cells did not induce platelet aggregation in the presence of $H_2O$$_2$.>.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.207-207
• /
• 2003

Uncooled infrared(IR) detectors that use a microbolometer with a large focal-plane array(FPA) have been developed with surface micromachining technology. There are many materials for microbolometers, such as metals, vanadium oxide, semiconductors and superconductors. Among theses, vanadium oxide is a promising material for uncooled microbolometers due to it high temperature coefficient of resistance(TCR) at room temperature. It is, however, is very difficult to deposit vanadium oxide thin films having a high TCR and low resistance because of the process limits in microbolometer fabrication. In general, vanadium oxides have been applied to microbolometer in mixed phases formed by ion beam deposition methods at low temperature with TCR in the range from -1.5 to -2.0%K.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.43-47
• /
• 2013

The extraction of metallic pure vanadium powder from raw oxide has been tried by Mg-reduction. In first stage, $V_2O_5$ powders as initial raw material was reduced by hydrogen gas into $V_2O_3$ phase. $V_2O_3$ powder was reduced in next stage by magnesium gas at 1,073K for 24 hours. After reduction reaction, the MgO component mixed with reduced vanadium powder were dissolved and removed fully in 10% HCl solution for 5 hours at room temperature. The oxygen content and particle size of finally produced vanadium powders were 0.84 wt% and 1 ${\mu}m$, respectively

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.68-68
• /
• 2018

Nanoporous or nanotubular metal oxide can be fabricated by anodization of metal substrate in fluoride contained electrolytes. The approach allows various transition metals such as Zr, Hf, Nb, Ta to form highly ordered oxide nanostructures. These oxide nanostructures have various advantages such as high surface area, fast electron transport rate and slow recombination in semiconductive materials. Recently, vanadium oxide nanostructures have been drawn attentions due to their superior electronic, catalytic and ion insertion properties. However, anodization of vanadium metal to form oxide layers is relatively difficult due to ease formation of highly soluble complex in water contained electrolyte during anodization. Yang et al. reported $[TiF_6]^{2-}$ or $[BF_4]^-$ in electrolyte helps to formation of stable oxide layer [1, 2]. However, the reported approaches are very sensitive in other parameters. In this presentation, we deal with the other important key parameters to form ordered anodic vanadium oxide such as pH, temperatures and applied potential.

• 분석과학
• /
• 제7권4호
• /
• pp.461-469
• /
• 1994

매달린 수은전극에서 N-Benzoylphenylhydroxylamine을 리간드로 사용하여 흡착벗김 전압전류법으로 PIPES 완충용액에서 극미량의 바나듐을 정량하였다. 이 때 흡착전위 +0.15V, 흡착시간 10초에서 바나듐의 검정곡선은 $10{\sim}70{\mu}g/L$ 범위에서 직선성을 나타내었다. 그리고 다른 금속 이온의 영향은 없었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.448-451
• /
• 2004

Vanadium oxides have been widely used in a variety of technological applications such electrochromic devices as infrared detectors and are expected as a material suitable for gas sensing applications. Thin films of Vanadium oxide (VOx) have been deposited by r.f magnetron sputtering under different oxygen partial pressure ratios and substrate temperatures. Humidity-sensitive properties of resistive sensors having interdigitated electrode structure are characterized. Our sensors show good response to humidity over 20%RH to 80%RH. Vanadium oxide films deposited with 0% $O_2$ partial pressure at foot exhibit greater sensitivity to humidity change than others.

• Bulletin of the Korean Chemical Society
• /
• 제9권6호
• /
• pp.362-364
• /
• 1988

Reaction of Keggin- or Dawson-type heteropolyanions containing two adjacent vanadium atoms with acetic anhydride in the presence of acid produced acylated anions. Heteropolyanions with one or no vanadium atom do not react under the same conditions, indicating that the acyl group is attached to the bridging oxygen atom between the two vanadium atoms. A characteristic infrared band at 1760 $cm^{-1}$ was observed for the acylated anions. The 8-line EPR spectrum shows that one of the vanadium atoms is reduced to V(IV ). The acylated heteropolyanions are easily hydrolyzed, and its acyl group can also be transferred to aniline.