• 한국진공학회지
• /
• 제18권3호
• /
• pp.197-202
• /
• 2009

사중극 질량분석기(Quadrupole Mass Spectrometer, QMS) 이온전류의 안정성은 진공공정 가스를 모니터링 하는데 중요한 요소 중 하나이다. 진공챔버에 질소가스를 주입하여 압력을 일정하게 유지하면서 시간에 따른 이온전류의 변화를 모니터링 하였다. 진공챔버는 측정하기 전에 잡음신호를 줄이기 위해 ${\sim}3{\times}10^{-9}\;Torr$ 까지 배기하였고, 두개의 이온소스를 측정했다; 하나는 오염된 것으로 갈색 또는 검은색을 띄고 있고 다른 하나는 새 것이다. 질소 압력 $1{\times}10^{-5}\;Torr$에서, 오염된 이온소스의 이온 전류는 시간이 지남에 따라 더 빨리 감소했다. 대략 5.5 시간이 지난 후, 감소율은 새 것이 ${\sim}46%$이고 오염된 것은 ${\sim}84%$였다. 필라멘트 재질이 이온 전류감소에 미치는 영향을 관찰하기 위해서 텅스텐 선의 반을 산화이트륨($Y_2O_3$)으로 코팅하여 필라멘트를 제작하였다. 유사한 이온전류 감소현상이 재질이 다른 두 필라멘트에서 나타났는데 이것은 필라멘트 재질에 의한 온도의 변화 즉 baking 효과로는 이온전류 감소의 원인을 개선할 수 없다는 것을 의미한다. 전반적으로 이온전류의 감소율은 필라멘트 재질보다 이온소스의 오염과 더 밀접하게 관계되어 있다.

• 한국진공학회지
• /
• 제21권6호
• /
• pp.295-300
• /
• 2012

지름이 각각 10 mm와 20 mm인 피스톤과 진공장치를 이용해서 발생된 유량과 이온게이지의 압력을 측정하여 비교하는 방법으로 개발 중인 오일유량계의 성능을 예비 평가하였다. 큰 피스톤의 유량 발생 범위는 $1{\times}10^{-1}Pa{\cdot}L/s{\sim}1.2Pa{\cdot}L/s$이었고 작은 피스톤의 유량발생 범위는 $5.3{\times}10^{-1}Pa{\cdot}L/s{\sim}1.05Pa{\cdot}L/s$이었으며, 이 구간에서의 반복성과 직선성은 비교적 좋았다. 개발 중인 오일유량계는 국가 리크표준기로서 앞으로 표준리크를 교정하는데 활용할 계획이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.378.2-378.2
• /
• 2016

Biosensors currently suffer from severe non-specific adsorption of proteins, which causes false positive errors in detection through overestimation of the affinity value. Overcoming this technical issue motivates our research. Polyethylene glycol (PEG) is well known for its ability to reduce the adsorption of biomolecules; hence, it is widely used in various areas of medicine and other biological fields. Likewise, amine functionalized surfaces are widely used for biochemical analysis, drug delivery, medical diagnostics and high throughput screening such as biochips. As a result, many coating techniques have been introduced, one of which is plasma polymerization - a powerful coating method due to its uniformity, homogeneity, mechanical and chemical stability, and excellent adhesion to any substrate. In our previous works, we successfully fabricated plasmapolymerized PEG (PP-PEG) films [1] and amine functionalized films [2] using the plasma enhanced chemical vapor deposition (PECVD) technique. In this research, an amine functionalized PP-PEG film was fabricated by using the plasma co-polymerization technique with PEG 200 and ethylenediamine (EDA) as co-precursors. A biocompatible amine functionalized film was surface characterized by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The density of the surface amine functional groups was carried out by quantitative analysis using UV-visible spectroscopy. We found through surface plasmon resonance (SPR) analysis that non-specific protein adsorption was drastically reduced on amine functionalized PP-PEG films. Our functionalized PP-PEG films show considerable potential for biotechnological applications such as biosensors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.576-576
• /
• 2013

Recently, diagnostics of plasma becomes more important due to requirement of precise control of plasma processing based on measurement of plasma characteristics. The Langmuir probe has been used for the diagnostics but it has an inevitable uncertainty and error sources such as incorrect tip length and RF noise. Instead of the Langmuir probe, various diagnostic methods have been developed and researched. The cutoff probe is promising one for plasma density using microwaves and resonance phenomenon at the plasma frequency. The cutoff probe has various advantages as follows; (i) it is simple and robust, (ii) it uses few assumptions, and (iii) it is free from deposition by reactive gas. However, the cutoff probe also has uncertainty and error sources such as gap between tips, tip length, direction of tip plane, and RF noise. In this study, the uncertainty and error sources in manufacturing both probes and in diagnostics process were analyzed via comparative experiment at various discharge conditions. Furthermore, to reveal the user dependence of both probes, three well trained Ph. D students made the Langmuir probe and the cutoff probe, respectively, and it were analyzed. Thought this study, it is established that reliability and validity of the Langmuir probe and the cutoff probe related with not only the intrinsic characteristics of probes but also probe user.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 2012

The Faraday cup electrode of different size has been developed and evaluated to investigate the diffusion effect of particles by Brownian motion in a particle beam mass spectrometer(PBMS). Particles which focused and accelerated by aerodynamic lens are charged to saturation in an electron beam, and then deflected electrostatically into a Faraday cup detector for measurement of the particle current. The concentration of particles is converted from currents detected by Faraday cup. Measurements of particle current as a function of deflection voltage are combined with measured relationships between particle velocity and diameter, charge and diameter, and mass and diameter, to determine the particle size distribution. The particle currents were measured using 5, 10, 20, 40 mm sized Faraday cup that can be move to one direction by motion shaft. The current difference for each sizes as a function of position was compared to figure out diffusion effect during transport. Polystyrene latex(PSL) 100, 200 nm sized standard particles were used for evaluation. The measurement using 5 mm sized Faraday cup has the highest resolution in a diffusion distance and the smaller particles had widely diffused.

• 한국광학회지
• /
• 제21권3호
• /
• pp.123-128
• /
• 2010

이터븀 광격자 시계의 검색 레이저로 쓰기 위하여, WG-PPLN를 사용하여 1319 nm 파장의 Nd:YAG 레이저와 1030 nm 파장의 Yb 도핑된 광섬유 레이저의 합주파수 (578.4 nm)를 발생시켰다. 이터븀 광격자에서 시계 전이선을 분광하기 위해서는 1 Hz 수준의 선폭을 가지는 검색 레이저가 필요하기 때문에, 합주파수로 발생된 노란색 레이저의 주파수를 초공진기에 안정화하여 선폭을 축소하였다. 초공진기는 선팽창 계수가 낮은 ULE로 제작되었고, 진동으로 인한 영향이 작은 받침점에서 능동형 제진대 위에 설치되었다. 공기 굴절률의 영향을 제거하기 위하여 이 초공진기를 진공 체임버 내부에 설치하고, 온도를 1 mK 수준에서 안정화 하였다. 또한, 이 장치들을 방음 체임버 안에 설치하여, 소리로 인한 잡음을 막아 주었다. 실험에 사용된 초공진기의 광자 수명시간으로부터, 그 예리도가 380 000으로 측정되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.275-275
• /
• 2012

The relative composition of $Cu(InGa)Se_2$ solar cells is one of the most important measurement issues. However, quantitative analysis of multi-component alloy films is difficult by surface analysis methods due to severe matrix effect. In this study, quantitative depth profiling analysis of CIGS films was investigated by secondary ion mass spectrometry (SIMS). The compositions were measured by SIMS using the alloy reference relative sensitivity factors derived from the certified compositions and the total counting numbers of each element. The compositions measured by SIMS were linearly proportional to those by inductively coupled plasma-mass spectrometry (ICP-MS) using isotope dilution method. In this study, the quantification measured by ICP-MS method is compared with the composition calculated by SIMS depth profiles with AR-RSFs obtained from the reference. The SIMS depth profile of CIGS thin films according to the manufacturing condition was converted into compositional depth profile.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.141-141
• /
• 2010

The effect of thermal anneal on the characteristics of structural properties and the enhancement of luminescence and photovoltaic (PV) characteristics of silicon-rich silicon-nitride films were investigated. By using an ultra high vacuum ion beam sputtering deposition, B-doped silicon-rich silicon-nitride (SRSN) thin films, with excess silicon content of 15 at. %, on P-doped (n-type) Si substrate was fabricated, sputtering a highly B doped Si wafer with a BN chip by N plasma. In order to examine the influence of thermal anneal, films were then annealed at different temperature up to $1100^{\circ}C$ under $N_2$ environment. Raman, X-ray diffraction, and X-ray photoemission spectroscopy did not show any reliable evidence of amorphous or crystalline Si clusters allowing us concluding that nearly no Si nano-cluster could be formed through the precipitation of excess Si from SRSN matrix during thermal anneal. Instead, results of Fourier transform infrared and X-ray photoemission spectroscopy clearly indicated that defective, amorphous Si-N matrix of films was changed to be well-ordered thanks to high temperature anneal. The measurement of spectral ellipsometry in UV-visible range was carried out and we found that the optical absorption edge of film was shifted to higher energy as the anneal temperature increased as the results of thermal anneal induced formation of $Si_3N_4$-like matrix. These are consistent with the observation that higher visible photoluminescence, which is likely due to the presence of Si-N bonds, from anneals at higher temperature. Based on these films, PV cells were fabricated by the formation of front/back metal electrodes. For all cells, typical I-V characteristic of p-n diode junction was observed. We also tried to measure PV properties using a solar-simulator and confirmed successful operation of PV devices. Carrier transport mechanism depending on anneal temperature and the implication of PV cells based on SRSN films were also discussed.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.308-313
• /
• 1997

Capacitance Diaphragm Gauge(CDG)를 전달표준기로 사용하여 한국과 영국의 저진 공표준의 국제비교를 수행한 결과 양국 표준기에서 교정한 CDG의 압력비의 차이는 0.05% 이었다. 또한 두 개의 Spinning Rotor Gauge(SRG)를 이용하여 한국과 일본이 고진공표준의 국제비교를 수행한 결과 양국 표준기에서 교정한 SRG의 accommodation coefficient($sigma$)의 차이가 0.4% 이내이었다. CDG와 SRG를 이용한 한국과 영국의 저진공표준기 및 한국과 일 본의 고진공표준기의 국제비교 결과 CDG 및 SRG 자체의 고유오차범위 이내에서 결과가 일치함을 확인할 수 있었다.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.151-156
• /
• 2008

반도체나 디스플레이 제조 등 진공공정의 리크검출에는 질량분석기형(mass spectrometer type) 헬륨 리크검출기(leak detector)가 사용되고 있다. 이 기기를 이용해서 안정된 측정값을 얻기 위해서는 장치 내부에 내장된 투과형(permeation type) 표준리크(standard leak)를 이용해서 자주 spectrometer를 교정해야 한다. 본 연구에서 질량분석기형 리크검출기의 비교교정 장치의 개발과 교정방법에 대한 연구결과를 언급하였다. 따라서 이 기술을 이용하면 질량분석기형 리크검출기를 구비하고 있는 현장에서도 표준리크의 비교교정이 가능하게 된다.