• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.5-14
• /
• 2007

The quantity of noxious wastes generated by the growth in industrialization and population in all over the world and its potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. Incorporated technique with PVDs have been used for dewatering from fine-grained soils for the purpose of ground improvement by means of soil flushing and soil vapor extraction systems. This paper is to evaluate several key parameters that affected to the performance of the PVDs specifically with regard to: well resistance of PVD, zone of influence, and smear effects. In the feasibility of contaminant remediation was evaluated in pilot-scale laboratory experiments. Well resistance is affected on the vertical discharge capacity of the PVDs under the various vacuum pressures. The discharge capacity increases consistently in areal extents with higher applied vacuum up to a limiting vacuum pressure. The head values for each piezometer at different vacuum pressures show that the largest head loss occurs within 14 cm of the PVD. Air flow rates and head losses were measured for the PVD placed in the model test box and the gas permeability of the silty soils was calculated. Increasing the equivalent diameter results in a decrease in the calculated gas permeability. It is concluded that the gas permeability determined over the 1,500 to 2,000 $cm^3/s$ flow rates are the most accurate values which yields gas permeability of about 3.152 Darcy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1686-1692
• /
• 2012

The antioxidative activity of Kalopanax pictus shoots extracted using five different methods, stirrer extraction (SE), ultrasonification extraction (USE), vacuum extraction (VE), reflux extraction (RE), and reflux extraction after ultrasonification extraction (RUE), was evaluated to determine the most effective extraction method. RUE showed the highest yield of extract, and total polyphenol and flavonoid content. Additionally, the RUE extract showed higher antioxidative activity than that of the other extracts based on DPPH and ABTS free radical scavenging (90.85%, 99.83%), reducing power activity (OD 0.95, 700 nm), nitrite scavenging activity (55.46%), and ferrous ion chelating effect (45.12%).

• Korean journal of food and cookery science
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2012

This study was carried out to evaluate biological activities concerning extracts according to extraction methods from unripened fruit of Rubus coreanus Miq. The extraction methods were HWE (hot water extraction for 4 hr at $100^{\circ}C$), SFE (extraction for 3 hr at $40^{\circ}C$ under 300 bar, 100% of $CO_2$ fluid), USE (ultrasonification extraction for 4 hr at $50^{\circ}C$ with water), USE+HWE (hot water extraction for 2 hr at $100^{\circ}C$ after ultrasonification process for 2 hr), VE (vacuum extraction for 4 hr at $90^{\circ}C$ under 0.9 bar with water). VE extract showed the highest contents of total polyphenol ($178.78{\pm}3.79\;mg/g$) and total flavonoid ($40.93{\pm}0.68\;mg/g$). $IC_{50}$ values of DPPH radical scavenging activity, linoleic acid peroxidation inhibition activity and LDL (low density lipoprotein) oxidation inhibition activity of HWE extract showed the lowest $35.39{\pm}0.25{\mu}g/mL$, $12.61{\pm}0.31{\mu}g/mL$ and $1.31{\pm}0.02{\mu}g/mL$ among other all extracts, respectively. $IC_{50}$ values of ${\alpha}$-glucosidase inhibitory activities of VE and HWE extracts showed lower $14.34{\pm}0.20{\mu}g/mL$ and $15.83{\pm}0.20{\mu}g/mL$ than those of other extracts, respectively. Specifically, HWE and VE extracts have relatively better biological activities than other extracts; these could be potentially used as a bioactive source for health functional foods.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.13-23
• /
• 2000

The effects of operating condition of soil vapor extraction system and the characteristics of site on the remediation of oil contaminated soil were investigated. Thorough investigation showed that the site was contaminated with gasoline leaked from underground storage tank and the maximum concentration of BTEX and TPH were 1,081 ppm and 5,548 ppm respectively. The leaked gasoline were diffused to 6m deep and the area and volume of the polluted soil were assumed to 170$m^2$ and 1,000$\textrm{m}^3$respectively. The site were consisted of three different vertitical layers, the top reclaimed sandy soil between the earth surface and 3~4m deep, middle silty sand between 3~4m and 6m deep, and the bottom bedrock below the 6m deep. The air pemeability of soil was measured to 1.058-1.077$\times$10$^{-6}$ $\textrm{mm}^2$ by vacuum pump tests. The groundwater which level was 3~4m deep was observed in some areas of this site. The soil vapor extraction system which had 7.5 HP vacuum pump and 8 extraction wells was constructed in this site and operated at 8 hrs/day for 100 days. The BTEX was removed with above 90% efficiency where no groundwater and silty sand were observed. On the contrary, the efficiency of BTEX and TPH were dramatically decreased where groundwater and silty sand were observed. The flow rate of soil air induced by soil vapor extraction system was reduced in deeper soil.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.151-160
• /
• 2001

Polymeric membranes consisting of poly(d,1-lactide) as a polymer matrix and crystallizable progesterone as a drug were prepared by coagulating polymeric solutions. The homogeneous casting solutions in dimethyformamide were solidified by using three different coagulating processes : solvent evaporation under vacuum, solvent extraction via immersion into the nonsolvent bath, or vapor exposure at high humidity condition. With solvent removal via evaporation under vacuum, the cast solution film was vitrified to form a homogeneous film containing progesterone of spherical shape distributed evenly in the film. Being prepared by solvent extraction via immersion into a water bath, the resulting membrane showed an asymmetric structure, with progesterone of big crystallites distributed unevenly in the structure. On the other hand, the coagulation under high humidity transformed the cast film into a sponge-like structure, where progesterone took a shape like flake.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.353-358
• /
• 2008

In order to increase extraction efficiency of AlGaInP-based vertical RED LEDs, chemical wet etching technique was produced by using a roughened surface with triangle-like morphology. A commonly used $H_3PO_4$-based solution was applied for chemical wet etching. The light extraction of AlGaInP LED was related to the n-side roughed surface morphology. The morphology of roughed surface is analyzed by the atomic force microscope (AFM). As a result, the roughed surface AlGaInP LED has a root-mean-square (RMS) roughness of 44 nm. The brightness shows 41% increase after roughening n-side surface, as compared to the ordinary flat surface LED.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.808-811
• /
• 2001

Performance of pilot plant scale extraction and concentration of purple-fleshed sweet potato anthocyanin pigment was tested and the characteristics of pigment extracts and concentrates were investigated. Fifty kilograms of purple-fleshed sweet potato was extracted with 500 L of 1% citric acid in 20% ethanol. As a whole, extraction pattern of the large scale extraction was similar to that of the laboratory scale extraction. The extracted pigment solution was filtered twice with a bag filter and a winding type microfilter and the filtrate was concentrated by a large scale vacuum evaporator at $40^{\circ}C$ and 600 mmHg vac. The mean values of total optical density (TOD) of the extract and the concentrate were 6.53 and 120.45, respectively. Browning index (BI) and Degradation index (DI) of extract were 5.86 and 1.55 and those of concentrate were 5.89 and 1.56, respectively, which indicated that the pigments were not changed or degraded through the extraction and concentration process.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.289-294
• /
• 2004

A high performance liquid chromatographic method was designed for the quantitative analysis of oxymatrine in Sophora Radix. The separation of oxymatrine was performed by reversed-phase chromatography with a $C_{18}$ column and a buffered aqueous solution containing acetonitrile, and monitored by UV absorption at 215 nm. Extraction of oxymatrine in Sophora Radix was carried out using various solvents and extraction methods. The optimum extraction efficiency for the crushed Sophora Radix was achieved by reflux at $80^{\circ}C$ in 50% ethanol for five hours. Most extraction methods used to complicate pretreatments. In this study, sublimation was employed for a extraction method without going through complicate pretreatments. Sublimation was carried out under high vacuum ($1{\times}10^{-3}$ torr) and at high temperature ($200^{\circ}C$). Extraction efficiency using Sublimation was found to be inferior to other extraction methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.351-352
• /
• 2012

UV LED에서 p-GaN층의 높은 일함수와 자체 면저항이 크기 때문에 current spreading layer인 ITO (indium tin oxide) 투명전극이 사용되고 있다. 따라서 높은 UV 파장대 투과율과 낮은 면 저항이 매우 중요하다. 본 연구에서, RF magnetron sputter를 사용하여 ITO 투명전극을 glass(boro33)에 120 nm 두께로 증착하였다. 그 후 RTA (rapid thermal annealing)을 이용해 120초 동안 $600^{\circ}C$에서 Air, $N_2$ (15 sccm), vacuum 환경에서 열처리를 하여 UV-Vis-NIR spectrophotometer를 사용해 ITO 박막의 투과율을 측정하고, Hall measurement system을 이용하여 전기적 특성을 측정하였다. Fig. 1과 같이 열처리 환경에 따라 ITO 박막의 투과율이 변하고 또한 Table 1과 같이 전기적 특성도 변함을 알 수 있었다. Air 환경에서의 열처리는 reference 샘플과 비교 했을 때 400 nm 이하의 파장에서 투과율이 증가하였지만 400 nm 이상의 파장에서는 투과율이 낮아짐을 볼 수 있고, 면 저항 (Ohm/sq)은 오히려 reference (as deposited) 샘플과 비교하여 24 Ohm/sq 증가하는 것을 알 수 있었다. 반면에 $N_2$, vacuum 환경에서 열처리는 reference (as deposited) 샘플 보다 380 nm 파장대에서 16% 정도 높은 투과율을 보였고, 면저항 역시 2배 이상 낮아졌다. 둘 다 비슷한 투과율과 면저항을 나타내었지만 vacuum 환경이 좀 더 우수한 광학적 특성을 나타내었고 반면에 $N_2$ 환경은 좀 더 낮은 면저항을 나타내었다. ITO 박막을 증착한 후 vacuum 환경에서 열처리를 통하여 제작된 UV-LED (중심 파장 380 nm)가 Fig. 2와 같이 입력 전류 450 mA에서 광출력이 46% 정도 향상 되었고 안정된 I-V 특성 보였다.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.234-238
• /
• 2016

Solid ash-free coal (AFC) samples recovered from solvent-extracted solution by vacuum drying, dilution precipitation and spray drying methods were compared in terms of physical properties and chemical structure. AFC was prepared by using Kideco coal (Indonesian sub-bituminous coal) and polar N-methyl-2-pyrrolidone (NMP) solvent as raw materials. The physical properties of the AFCs were characterized with proximate, ultimate, and calorific value analysis. In analyzing the chemical structure, FTIR and NMR were used. the proximate analysis showed much reduced ash in the AFCs compared to parent raw coal. The FTIR result showed that the extraction solvent was not fully removed from the AFC prepared by vacuum drying. However, the solvent was not detected in the AFC recovered by using dilution precipitation. Dilution precipitation has advantages over the other two methods, since it can be done at relatively low temperature and separate ash-free coal from extraction solvent more effectively.