• 에너지공학
• /
• 제12권3호
• /
• pp.216-222
• /
• 2003

실험실 규모의 진공 증발 수분 제거 시스템을 이용하여, 압력, 윤활유의 온도, 초기 수분농도 및 윤활유 분사 노즐의 형태 등 폐윤활유 속에 포함된 수분 제거 성능에 영향을 미치는 각각의 운전 변수들에 대한 실험적인 연구를 수행하였다. 연구의 결과 압력 및 폐윤활유 온도의 증가는 수분 제거 성능에 매우 중요한 변수임을 확인하였으며, 또한 진공 증발실로 폐윤활유를 분사하기 위한 노즐의 형태는 다공성 매질의 노즐 형상인 경우가 가장 우수한 수분 증발 성능을 나타내었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제3회 학술강연회논문집
• /
• pp.39-45
• /
• 1994

Combustion characteristics of the solid composite propellants were studied from burning rate, ignition and steady combustion processes, and structure of the extinguished surfaces. Optical Vacuum Strand Burner (OVSB) system was desisted and configured to study those. Burning rates of the propellants were measured by OVSB at low pressure range by developed ten method. video camera(30 frames/s) was used to take potographs of the phenomena of ignition and combustion of propellant within the test cell of the OVSB. Burning surfaces of the propellants that were extinguished by rapid depressurization method were analyzed with Scanning Electron Microscope. (SEM).

• 열처리공학회지
• /
• 제15권6호
• /
• pp.269-271
• /
• 2002

For the investigation of the hardness profiles and distortion characteristics of SCM415 steel, test pieces of SCM415 steel were gas and vacuum carburizing treated. The hardness profiles and distortion characteristics of vacuum and gas carburized SCM415 steel show different results. Vacuum carburizing can offer more improved hardness profiles than alternate methods of carburizing. Compared to alternate methods of carburizing, vacuum carburizing can offer improved mechanical properties and reduced cycle times of the process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.92-94
• /
• 1999

This paper describes axial magnetic field characteristics of multipolar axial magnetic field type electrodes for vacuum interrupter used in vacuum circuit breaker. It was distinguished that axial magnetic field distribution in consideration of eddy current effect between electrodes by finite element method. Throughout experiment of magnetic field measurement, confirmed validity of numericla analysis.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.195-200
• /
• 2017

A mobile lab kart for plasma training is developed with a high vacuum pumping system, vacuum gauges and a glass discharge tube powered by a high voltage transformer connected to a household 60 Hz line. A numerical model is developed by using a commercial multiphysics software package, CFD-ACE+ to analyze the experimental data. Simulations for argon and nitrogen were carried out to provide fundamental discharge characteristics. Variations of the kart configuration were demonstrated: a glass tube with three electric probes, optical emission spectrometer attachment and infra red thermal imaging system to give more detailed analysis of the discharge characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.475-480
• /
• 1992

The effect of mechanical factors and season of the year on milking characteristics (milk yield, time of milking, rate of milk flow, stripping time and tripping milk) were studied on 26 Holstein Friesian cows, raised under Saudi Arabia environmental conditions. Cows were in the third and fourth lactation and reached the peak. Cows milked twice a day with equal intervals. Three vacuum levels (34, 38 and 42 cfm) and two pulsation ratios were used to form six vacuum-pulsation combinations. The study was carried during two seasons Autumn-Winter (S1) and Spring-Summer (S2). After absorbing the cow equations least square analysis was used to analyze the data. Vacuum level 38 cfm and pulsation ratio 70:30 was the best among all combinations of vacuum level-pulsation ratio. No significant effect (p < .01) for season, up to the seventh half minute, on the rate of milk flow. However, season of the year has a significant effect on total milk yield, stripping time and stripping milk.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.312-320
• /
• 2001

$10^{-9}$ Pa 대의 진공을 얻기 위한 주 배기 펌프로서 Zr-V-Fe 합금계의 비증발성 게터 펌프를 제작하고, 실온에서 수소, 중수소 및 일산화탄소에 대한 NEG 펌프의 배기 속도를 측정하였으며 $450^{\circ}C$로 활성화하면서 수소 방출 특성을 조사하였다. 그리고 터보 분자펌프, 스퍼터 이온펌프 및 크라이오 펌프 등 다른 초고진공 펌프들로 배기하면서 용기 내의 잔류기체를 분석함으로써 이들 펌프 및 NEG 펌프의 배기 성능을 비교하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.832-835
• /
• 2003

By using vacuum in-line driving and photoluminescence measuring method, we have observed the electrical and optical characteristics of the vacuum in-line sealing technology and analyzed the effect of the base vacuum level before filling the plasma gas. In the case of base vacuum level of $1{\times}10^{-3}$torr, the firing voltage of a 2-inch diagonal PDP panel was ranged from 310 to 345V depending on the plasma gas pressure of 200 to 300torr and luminous efficiency was ranged from 0.0227 to 0.0367 lm/W depending on the input voltage level of 330 to 225V. While, in the case of $1{\times}10^{-6}$, the characteristics were significantly improved. As a results, the firing voltage was ranged from 295 to 318V and luminous efficiency was from 0.0278 to 0.0451 lm/W.

• 동력기계공학회지
• /
• 제14권4호
• /
• pp.23-28
• /
• 2010

Of the roughly four million known substances, about 60,000 are processed and sold ; many of these must be dried. Many materials are processed in the liquid state - ideal for mixing and reacting - but most products are needed or wanted as dry, or relatively dry, solids. Usually operation is just below atmospheric pressure, as with direct dryers, but some are built for vacuum operation with pressures as low as 26.66kPa abs.. In spite of the global-class aquiculture agriculture and fisheries technology of our country, the processing technologies are lags behind the other nations relatively. These problems are considered to be caused directly by the lack of drying technologies. This paper is concerned to the experimental results of drying heat transfer characteristics for the green energy type vacuum dryer for the high quality agriculture and fisheries production.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1039-1040
• /
• 2006

Vacuum degassing is essential in the preparation of RS P/M aluminum alloys to remove adsorbates and for the decomposition of hydrated-$Al_{2}O_3$ on the powder surface. Changes in the surface characteristics during vacuum degassing were investigated by X-ray photoelectron spectroscopy and temperature-programmed desorption measurement. Hydrated-$Al_{2}O_3$ decomposition to crystalline-$Al_{2}O_3$ and hydrogen desorption on the surface of argon gas-atomized aluminum powder occurred at 623 K and 725 K, respectively. This temperature difference suggests that the reaction converting hydrated-$Al_{2}O_3$ to crystalline-$Al_{2}O_3$ during vacuum degassing should be divided into the two reactions $"2Al+Al_{2}O_3{\cdot}3H_2O\;2Al_{2}O_3+6H_{surf}"and"6H_{surf}3H_2"$.