• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.81-86
• /
• 2003

Current growth of VLSI design depends critically on the research and development of automatic layout tool. Automatic layout is composed of placement assigning a specific shape to a block and arranging the block on the layout surface and routing finding the interconnection of all the nets. Algorithms performing placement and routing impact on performance and area of VLSI design. Switchbox routing is a problem interconnecting each terminals on all four sides of the region, unlike channel routing. In this paper we propose a genetic algorithm searching solution space for switchbox routing problem. We compare the performance of proposed genetic algorithm(GA) for switchbox routing with that of other switchbox routing algorithm by analyzing the results of each implementation. Consequently experimental results show that out proposed algorithm reduce routing length and number of the via over the other switchbox routing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.7
• /
• pp.628-637
• /
• 1990

In this paper we present on architecture for a high sppeed CMOS multiplier which can be used for real-time digital signal processing. And a synthesis method for designing highly parallel algorithms in VLSI is presented. A parallel multiplier design based on the modified Booth's algorithms and Ling's algorthm. This paper addresses the design of multiplier capable of accpting data in 2's complement notation and coefficients in 2's complement notation. Multiplier consists of an interative array of sequential cells, and are well suited to VLSI implementation as a results of their modularity and regularity. Booth's decoders can be fully tested using a relatively small number af test vector.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.623-628
• /
• 1986

This paper reviews various CAD(Computer-Aided design) or DA(Design Automation) procedures for specification, design and verification of VLSI chips. The growth and widening of engineering achievements and applicational varieties in this revisited field has been truly explosive for the last five years. Recent trends in VLSI/CAD area and their possible implications on the future evolution of DA society are briefly touched upon. The relative importance of chip specification and design capability within the whole Korean electronics infrastructure in the future is explained with several possible suggestions for coping with upcoming difficulties already being seen in this challenging yet promising area.

• Information and Communications Magazine
• /
• v.9 no.9
• /
• pp.72-85
• /
• 1992

The throughput requirement for many digital signal processing is such that multiple processing units are essential for real-time implementation. Advances in VLSI technology make it feasible to design and implement computer systems consisting of a large number of function units. The research on a very high throughput VLSI architecture for digital signal processing applications requires the development of an algorithm, decomposition scheme which can minimize data communication requirements as well as minimize computational complexity. The objectives of the research are to investigate computationally efficient algorithms for solution of the class of problems which can be modeled as DLSI systems or adaptive system, and develop VLSI architectures and associated multiprocessor systems which can be used to implement these algorithms in real-time. A new VLSI architecture for real-time 2-D digital signal processing applications is proposed in this research. This VLSI architecture extends the concept of having a single processing units in a chip. Because this VLSI architecture has the advantage that the complexity and the number of computations per input does not increase as the size of the input data in increased, it can process very large 2-D date in near real-time.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.7
• /
• pp.1691-1716
• /
• 1998

본 논문에서는 계층적 블록매칭 알고리즘(HBMA)을 위한 두 가지 병렬 VLSI 아키텍쳐를 제안한다. HBMA는 계층에 따른 반복수행과 공간 인터폴레이션을 기반으로 수행되며, 이러한 수행 특성은 병렬처리의 장애요소인 데이터 종속성을 내재하고 있다. 제안된 아키텍쳐는 HBMA의 계층간 데이터 종속성을 해결하기 위하여 기본적으로 파이프라인 구조를 채택하고 있으며, HBMA에서 주어진 매개변수에 따라 세 단계의 스테이지로 구성된다. 제안된 아키텍쳐는 입력 프레임 데이터의 흐름을 제어하는 방식에 따라 두 가지 종류로 구분된다. U-Architecture는 단방향 스캔 순서를 따르도록 설계되었으며, B-Architecture는 양방향 스캔 수서를 따르도록 설계되었다. 각 아키텍쳐의 내부 메모리와 인터폴레이션 모듈은 해당 스캔 순서에 따라 동기적으로 동작할 수 있는 구조를 가진다. 성능분석의 결과로서 본 논문에서 제안한 두 가지 아키텍쳐가 모두 방송용 비디오 포맷을 실시간으로 처리할 수 있음을 보이고, HDTV 포맷은 가까운 장래의 VLSI 기술로 실시간 성능을 얻을 수 있음을 보였다. 또한, B-Architecture는 공간 연결성 내부 메모리 구조를 채택함으로써 입력 데이터의 재활용도를 높이고, 이에 따라 Q-Architecture에 비해서 데이터 입출력 핀의 개수를 약 반정도 줄일 수 있는 특성을 보이고 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.748-749
• /
• 2007

본 논문은 저전력이고 속도가 빠르면서도 작은 gate 면적만으로 JPEG2000 표준의 이산 웨이블릿 변환 (DWT)을 수행하는 VLSI 구조를 제안하였다. 제안한 구조는 line-based 와 convolution 방식을 사용하여 설계하였다. DWT 필터는 1 차원 구조로서 영상의 수평방향이나 수직방향을 차례대로 처리하였고, 16-비트 고정 소수점 형식의 Daubechies 9/7 필터 계수를 사용하였다. 기존의 DWT VLSI 설계에서 매우 큰 영역을 차지하는 multiplier 들을 shift-adder 들로 대체하여 기존 방식의 gate 사용 면적을 38.5% 로 크게 줄일 수 있었다. 또한 최대 지연시간과 총 소비전력은 각각 기존에 비해 78% 와 29.6% 로 개선되었다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1495-1507
• /
• 1997

Among a number of approaches to text compression, adaptive dictionary schemes based on a sliding window have been very frequently used due to their high performance. The LZ77 algorithm is the most efficient algorithm which implements such adaptive schemes for the practical use of text compression. This paperpresents a VLSI architecture designed for processing the LZ77 algorithm in parallel. Compared with the other VLSI architectures developed so far, the proposed architecture provides the more viable solution to high performance with regard to its throughput, efficient implementation of the VLSI systolic arrays, and hardware scalability. Indeed, without being affected by the size of the sliding window, our system has the complexity of O(N) for both the compression and decompression and also requires small wafer area, where N is the size of the input text.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.8-16
• /
• 1999

This paper describes a VLSI design of Reed-Solomon(RS) decoder using the modified Euclid algorithm, with the main theme focused on the $\textit{GF}(2^8)$. To get area-efficient design, a number of new architectures have been devised with maximal register and Euclidean ALU unit sharing. One ALU is shared to replace 18 ALUs which computes an error locator polynomial and an error evaluation polynomial. Also, 18 registers are shared to replace 24 registers which stores coefficients of those polynomials. The validity and efficiency of the proposed architecture have been verified by simulation and by FLEX$^TM$ FPGA implementation in hardware description language VHDL. The proposed Reed-Solomon decoder, which has the capability of decoding RS(208,192,17) and RS(182,172,11) for Digital Versatile Disc(DVD), has been designed by using O.6$\mu\textrm{m}$ CMOS TLM Compass$^TM$ technology library, which contains totally 17k gates with a core area of 2.299$\times$2.284 (5.25$\textrm{mm}^2$). The chip can run at 20MHz while the DVD requirement is 3.74MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.41-47
• /
• 2010

This paper has proposed parallel BCH, one of error correction coding methods which has been used to NAND flash memory for SSD(solid state disk). To alter error correction capability, the proposed design improved reliability on data block has higher error rate as used frequency increasingly. Decoding parallel process bit width is as two times as encoding parallel process bit width, that could reduce decoding processing time, accordingly resulting in one half reduction over conventional ECC.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.104-112
• /
• 1989

A design automation method for sequential circuits implementation by mans of PLA is discussed, and an optimal state-code assignment algorithm to minimize the PLA area is proposed. In order to design sequential circuit automatically, DASL (Design Automation Support Language) [8] which is easy to describe and powerful to synthesize, is proposed and used to describe sequential circuit, An optimal statecode assignment algorithm which considers next states and outputs simultaneously is proposed, and by adopting this algorithm to various examples, the area of PLA is reduced by 10% comparing privious methods. This system is constructed to design microinstruction, FSM, VLSI control part synthesis.