• Journal of Magnetics
• /
• v.2 no.1
• /
• pp.12-15
• /
• 1997

Fe-(3∼6.5wt%) Si alloy powders having a high magnetic induction(Bs) and a low core loss value for high frequency use were obtained by an extractive melt spinning as well as a centrifugal atomization technique. Sintered core rings made by the rapidly solidified Fe-6.5wt% Si powders exhibited the high frequency magnetic properties : megnetic induction(B8) of 1.23 T, coercivity(Hc) of 0.12 Oe, relative permeability(${\mu}$a) of 6321, and core loss(W10/50) of 1.27 W/kg from the rings of 1.1 mm thick. The magnetic induction values were found to be almost identical to those of non-oriented Fe-6.5wt% Si steel sheet and double the value of 6.5wt% Si sheet prepared by the CVD technique. The high frequency core losses(W) up to 10 kHz(W10/10k) were measured to be competitive to those of grain-oriented Fe-6.5wt% Si steel sheet.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.1-5
• /
• 2010

We propose an algorithm which can classify the system should use a PI controller, which have a weak high frequency attenuation characteristics near the critical frequency. To classify the system, we use a time delay element to calculate a gain attenuation rate near the critical frequency. The proposed algorithm also can design PI controller with the given magnitude margin and phase margin specification. The proposed algorithm uses time delay element and saturation function to identify the one point information in frequency domain. We justify the proposed algorithm via the simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.943-946
• /
• 1988

A simple method is proposed for determining the frequency response function G(j.omega.) of a system using a pair of characteristic M-sequences (maximum length linear feed back shift register sequence). When a characteristic M-sequence is sampled with q$_{1}$ and q$_{2}$ both of which are coprime with N, where N is the period of the M-sequence, the obtained pair of sequences have conjugate complex frequency spectrum. Making use of this fact, two charcteristic M-sequences having conjugate complex frequency spectrum are applied to a system to be measured. Since the magnitude of spectrium of M-sequence is known, the gain of G(j.omega.) is directly obtained from the Fourier transform of the system output. The phase of G(j.omega.) is obtained simply by taking the average of the two phases of output spectrum.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.641-644
• /
• 2012

The problem of sinusoidal parameter estimation at two channels with common frequency in white Gaussian noise is addressed. By making use of the linear prediction property, an iterative linear least squares (LLS) algorithm for accurate frequency estimation is devised. The remaining parameters are then determined according to the LLS fit with the use of the frequency estimate. It is proven that the variance of the frequency estimate achieves Cram$\acute{e}$r-Rao lower bound at sufficiently small noise conditions.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.75-75
• /
• 2011

This paper has been studied that ocean wave vibration power generator is composed of buoy and vibration generator to make effective use of ocean wave energy. We designed buoy to can occur resonance for dominant frequency with ocean wave. And then we fitted the natural frequency of vibration system with vibration power generator to buoy's natural frequency. And we can show that the amplitude of ocean wave up and down motion is decreased, on the other hand, the displacement of vibration system with vibration power generator is increased. Therefore, ocean wave vibration power generator which is proposed in this paper has merits not only securing its stability from surroundings but also producing more electronic power by using ocean wave energy.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.81-86
• /
• 2004

GPS surveying is being applied in earnest in public and construction surveying field recently. However only large enterprise surveying companies have GPS equipments but almost of small companies don't have them because of that their financial status is always too poor to purchase the expensive equipments such as Dual frequency GPS receiver. This is caused by some misunderstanding that only Dual frequency GPS receiver can be used for Public surveying. In order to increase the use of Single frequency GPS receiver to achieve competitive power of small companies in future, we need to verify the applicability and recommend surveyors to use it.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.153-156
• /
• 2000

To reduce the maintenance expense, and the possibility of electric outage and accident, we should optimize the outdoor insulation system. And for the optimization, accurate measurement for the degree of contamination with climatic conditions, such as wind, rain, and drought, should be carried. However the classical measuring method, brush wiping, has some problems in the aspect of man power, reliability, and expense. In this paper, we propose two type apparatus, which could detect the degree of contamination on insulators in outdoor insulation system, such as transmission and distribution line insulator and bushing. One use the leakage current, and the other use the oscillating frequency to check the degree of contamination. To avoid the oxidation of electrode AC source, and the low degree of contamination was applied. From the result of this investigation we could get the good relationship between the degree of contamination and the leakage current and oscillating frequency

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.587-593
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time-frequency representation and its application for a machinery diagnostics and condition monitoring system. The objective of the research described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time-frequency representation, Directional Wigner-Ville Distribution, which analyses the time- frequency structure of the rotating machinery vibration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.893-895
• /
• 2014

Railway dedicated frequency bandwidth allocation matters are being discussed actively before an introduce of wireless communication based train control system to korean railway industry. Allocating the frequency band, which has great value as a public resource, for suitable use with right amount is particularly important, because of equity in other fields and valuable use of limited resources. In this paper, the feasibility about stable railway communication network operation based on LTE in diverse frequency bandwidth will be discussed with solicitous simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1832-1838
• /
• 2009

In this paper, we present new signal de-interleaving method for the frequency agility radar in which the carrier frequency is changed irregularly. Generally radar use a fixed carrier frequency, and it is easy for electronic warfare system to de-interleave the radar signal with respect to the frequency, pulse width(PW), and direction of signal arriving(DOA). In frequency agility radar, it is difficult to de-interleave the radar signals according to the carrier frequency because the frequency is changed irregularly. We suggest a good de-interleaving method to identify the frequency agility radar signals in comparison with PRI's of radars. First we calculate pulse repeat Interval(PRI) of radar in linked-list and queue structure and de-interleave the radar signals with PRI, PW, and DOA, then identify the frequency agility radar. When we use the proposed algorism to the frequency agility radar, we have a good de-interleaving results with electronic warfare systems.