• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.563-570
• /
• 1993

Spherical, monosized gadolinium compound was prepared by the reaction of Gd(NO3)3 solution with decomposition products of urea in the solution at evaluated temperature. Chemical composition and calcination characteristics of spherical gadolinium compound prepared were investigated by X-ray IR and TG-DTA. The approximate chemical composition of the spherical particle precipitated was Gd(OH)CO3.1.5H2O. Gd(OH)CO3.1.5H2O was calcined to monoclinic type Gd2O3 at 115$0^{\circ}C$ via cubic type Gd2O3 near $600^{\circ}C$. The effects of various parameters such as pH, temperature, concentration ratio of urea to gadolinium precusor, ageing time, and others material (CCl3COOH and HOCNH2) in stead of urea as precipitating agent on the properties of the resulting precipitates were studied systematically.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.805-808
• /
• 2011

We have determined the urea concentration in an aqueous solution using Raman spectroscopy by incorporating a Teflon tube as an effective intensity correction standard as well as sample container. A non-overlapping Teflon band was used as the reference peak to correct Raman intensity variations that occasionally resulted from changes in laser power. To increase the sensitivity, we positioned a copper reflector inside the Teflon tube to maximize the collection of Raman scattering. The obtained accuracy using Raman spectroscopy was 0.53 mM, close to the range of accuracy of previous NIR studies (0.15-0.52 mM).

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.500-509
• /
• 2013

SCR 머플러 입구와 촉매사이에 설치되는 다공튜브 형상변화에 따른 촉매 삽입형 urea-SCR 머플러 내부유동특성이 해석적으로 조사되었다. 다공튜브는 요소수 분무와 배기가스 혼합물의 공간분포 향상을 통한 $NO_x$ 저감율 증대 및 암모니아 슬립을 방지하기 위해 사용되는 장치이다. 다공튜브 오리피스 면적비 변화가 챔버 내부 유동 및 촉매 전후단의 속도분포에 끼치는 영향이 조사되었으며, 속도분포에 대한 균일도 지수가 최적설계 관점에서 평가되었다. 해석은 상용 유동해석 프로그램을 이용하여 정상상태에서 수행되었으며 요소수 분무와 배기가스 혼합물 대신 상온의 공기가 작동유체로 사용되었다. 해석결과로부터 다공튜브 형상은 머플러 입구와 촉매 전단 사이에 형성된 챔버 내 벌크 선회유동과 촉매 전후단 속도분포의 균일도지수에 큰 영향을 끼침을 알 수 있었다.

• Carbon letters
• /
• 제19권
• /
• pp.40-46
• /
• 2016

Nitrogen-atom doped graphene oxide was considered to prevent the dissolution of polysulfide and to guarantee the enhanced redox reaction of sulfur for good cycle performance of lithium sulfur cells. In this study, we used urea as a nitrogen source due to its low cost and easy preparation. To find the optimum urea content, we tested three different ratios of urea to graphene oxide. The morphology of the composites was examined by field emission scanning electron microscope. Functional groups and bonding characterization were measured by X-ray photoelectron spectroscopy. Electrochemical properties were characterized by cyclic voltammetry in an organic electrolyte solution. Compared with thermally reduced graphene/sulfur (S) composite, nitrogen-doped graphene/S composites showed higher electroactivity and more stable capacity retention.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.204-209
• /
• 2003

The effect of padding solution on the microwave heat dyeing of polyester fabric was studied extensively. Polyester fabrics were impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 min and then dyed for 7 min by microwave apparatus (2450 MHz, 700 W) under optimum conditions which provide good exhaustion. Aqueous solutions of urea and sodium chloride showed more effective than water as a padding solution for microwave heat dyeing. The type of solvent added in padding media and its concentration significantly affects the K/S values of dyed polyester fabric. Added solvents such as n-hexane, acetone, and dimethyl formamide were also more effective than 100 % water as padding media for the microwave heat dyeing. It is supposed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Journal of Plant Biology
• /
• 제4권2호
• /
• pp.51-61
• /
• 1961

In order to detect the way of absorption and metaboism of the urea it is sprayed on the surface of the leaves of sunflower. The sunflowers used in this study are grown in different conditions such that the one in nittogen aboundant and the other in nitrogen deficient soil, respectively. The urea-N, ammonia-N, amide-N, and 80% alcohol soluble-N in the leaves were quantitatively determined. All of the nitrogenous components measured are generally tended to increased with rising the concentration of urea except only amide-N at 24 hours after sprayed, and these were highly significances. It seemed that hydrolizing of urea into ammonia and carbon dixide and the assimilation of ammonia into other organic nitrogenous constituents were rapid in the young leaves than in the mature. It is interest that the amide content, in the young leaves and nitrogen defieient one were enhanced with the increasing concentration of urea, although in the mature leaves it did not show any change in the urea treatment. It is presumed that the assimilation rate of ammonia and the urease activity were lower in the matture leaves than in the young and nitrogen deficient leaves. No significance at 5% level showed all of the nitrogenous components except total nitrogen between nitrogen abundant and deficent leaves. Urea content was a high peak at first 12 hours, ammonia at 48 hours, and amide and alcohol soluble nitrogen at 96 hours, whence decrease4d the content of these constituents gradually. The total nitrogen content is not incrased obviously by only one time of urea spray in this study. When the concentration of urea was relatively high there appeared the wilting spots on t도 edge of leaves. As a whole, it seemed that sprayed urea was rapidly absorbed and taken part in nitrogen metabolism within relatively short period.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.65-70
• /
• 2008

The numerical simulation on the internal flow characteristics of the adaptor in a two-fluid nozzle has been performed to investigate the effects of carrier air supplying parameters using a commercial code. The four adaptor models with the different positions in the carrier air supplying port were considered at the fixed conditions of urea-water solution and carrier air supplying. As the results from the numerical analysis, the internal pressure of the adaptor was varied with the port position for carrier air supplying, and it shows lower pressure value than the atmospheric pressure. Consequently, the flowrate of urea-water solution issuing from the feeding injector with the adaptor varied up to 30% with the port positions for the carrier air supplying. When the carrier air is supplied from the side from the feeding injector axis and the upper part from the feeding injector tip, the flowrate of urea-water solution issuing from the feeding injector with the adaptor show higher value than other carrier air supplying conditions.

• 대한화학회지
• /
• 제51권4호
• /
• pp.339-345
• /
• 2007

Urea는 높은 온도(60~80 °C)의 수용액 상태에서 PtCl2, H2[PtCl6]·6H2O, H2[IrCl6] Ni(CH3CO2)2 와 반응해서 각각 (1)[PtCl2(Urea)]·2H2O, (2)(NH4)2[PtCl6], (3)(NH4)2[IrCl6]·H2O, (4)[Ni2(OH)2(NCO)2(H2O)2]의 complexes를 생성 한다. complexe 1에서 urea는 중성 bidentate 리간드로써 Pt(II)와 배위한다. complexe 2,3,4에서는 높은 온도에서 반 응하는 동안 배위 urea분자들이 분해되고 다양한 반응생성물들을 얻을 수 있다. 모든 complexes은 각각 적당한 수득률 로 dark green(1) yellow(2), pale brown (3) faint green(4)의 침전물로 분리된다. 반응생성물은 열분석, IR, 1H and 13C NMR spectra에 의해 측정 되었다. 이 complexes의 구성을 설명하는 일반적인 매카니즘이 제시되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.368-377
• /
• 2013

대형디젤기관 배기가스 저감용 Urea-SCR 시스템은 높은 NOx 저감율을 보이는 반면, 높은 관통도를 갖는 요소수가 벽면 충돌 후 증발하지 못하고 벽면에 머물게 되어 우레아염을 형성한다. 우레아염 생성 방지를 위한 방안으로 벽면유동 형성을 촉진하기위한 믹서-하우징 조립체의 형상 최적화와 관련된 실험적 연구가 수행되었다. 하우징 경사각 변화 및 믹서 설치위치에 따라 벽면유동의 증가 가능성이 hot-wire 시스템을 이용하여 조사되었다. 벽면 유동은 하우징 경사각 및 믹서 설치 위치에 큰 영향을 받으며, 하우징 경사각이 있고 믹서가 하우징 후단에 설치될 때 벽면유동이 향상되는 것을 알 수 있었다.

• 한국염색가공학회지
• /
• 제2권3호
• /
• pp.36-42
• /
• 1990

The effect of urea and its derivatives, which are known as structure breakers of water, in the dyeing of silk with acid dyes was investigated. Without ureas the maximum dye uptake was observed at $60^{\circ}C$ when dyed with Milling Cyanine 5R, but in the presence of ureas the maximum dye uptake was decreased and its temperature also shifted to lower regin in the order of urea >N-methyl urea > N,N-dimethyl urea>tetramethyl urea. These tendencies were more marked in the dyeing of silk fiber with Orange II, a typical levelling type acid dye. These can be interpreted as the decrease in the hydropholic interaction between fiber molecules which results in the broadening of the inter micelie spacing. The increased partition coefficient of dye molecules in the bath by the action of ureas also contributes to dyeing results, and it can be seen from the spectral characteristics of dyes in aqueous urea solution.