• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.231-238
• /
• 2017

Using 3D based BIM(Building Information Modeling) enables a variety of construction simulations. The is no case to simulate BIM demonstration experiment on deeply immersed virtual reality environment in korea. This paper develops a multi screen based simulation system to enable 3D based immersed environment to diverse decision making and virtual construction simulation. In a developed simulation laboratory, we can carry out BIM drawing review, disaster evacuation simulation, constructability review on wild land and design urban planning using haptic device on 3-side space with 4K resolution . Also, It can review large amount of drawings without data conversion because of compatibility with BIM software.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.505-521
• /
• 2007

This study estimated response of water duality and pollutant behavior according to the discharge and reuse of treated wastewater by three-dimensional eco-hydrodynamic model, and suggest plan that water quality management and environmental restoration in the coastal area including urban stream of Yeosu, Korea. Dispersions of low-saline water and COD by treated wastewater loads (design facility capacity, about $110,000m^3/d$) were very limited in near of effluent site. Nutrients, however, increase compared to the other water quality factors, especially total nitrogen was very sensitive to input loads. When reuse some of treated wastewater to Yeondeung stream, nitrogen was big influence on estuarine water quality. Although current characteristics of treated wastewater such as discharge and water quality were negligible to the change of marine environment, effluent concentration of COD, TN and TP, especially 40% of TN, are reduced within the allowable pollutant loads for satisfy environmental capacity and recommended water duality criteria. Also, controls of input point/non-point sources to Yeondeung stream and base concentration of pollutants in coastal sea itself are very necessary.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.27-32
• /
• 2005

DEM is needed for urban modeling, forecasting of floods and the analysis of slope and aspect. It has been generated using digital maps, aerial photos or satellite imageries. Recently, however, many studies on DEM generation from LiDAR data has been conducted because of its efficiency and accuracy. Filtering is said to be the process of making DEM by eliminating non-ground points from LiDAR data. In most researches, some input parameters such as the size of filter are required. The purpose of this investigation is to automatically obtain DEM by eliminating objects of various sizes without the knowledge of the objects' sizes. The experimental results show that most of objects on steep terrain are eliminated by the proposed method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.3
• /
• pp.11-21
• /
• 2011

The development of computer-based modeling system has allowed the operationalization of cognitive science issues. Human cognition has become one of most interesting research subjects in artificial intelligence to emulate human mentality and behavior. This paper introduces a methodology well-suited for designing the intelligent system of human cognition. The research investigates how to elicit and represent cognitive knowledge obtained from individual city-dwellers through the application of fuzzy relational theory to personal construct theory. Crucial to this research is to implement formally and process interpretatively the psychological cognition of urbanites who interact with their environment in order to offer useful advice on urban problem. What is needed is a techniques to analyze cognitive structures which are embodiments of this perceptive knowledge for human being.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6729-6734
• /
• 2015

Background: To analyze the mortality distribution of nasopharyngeal carcinoma in China from 1991 to 2013, to predict the mortality in the ensuing five years, and to provide evidence for prevention and treatment of nasopharyngeal carcinoma. Materials and Methods: Mortality data for Nasopharyngeal Carcinoma in China from 1991 to 2013 were used to describe its epidemiological characteristics, such as the change of the standardized mortality rate, sex and age differences, urban-rural differences. Trend-surface analysis was used to study the geographical distribution of the mortality. Curve estimation, time series, gray modeling, and joinpoint regression were used to predict the mortality for the ensuing five years in the future. Results: In China, the standardized mortality rate of Nasopharyngeal Carcinoma increased with time from 1996, reaching the peak values of $1.45/10^5$ at the year of 2002, and decreased gradually afterwards. With males being 1.51 times higher than females, and the city had a higher rate than the rural during the past two decades. The mortality rate increased from age 40. Geographical analysis showed the mortality rate increased from middle to southern China. Conclusions: The standardized mortality rate of Nasopharyngeal Carcinoma is falling. The regional disease control for Nasopharyngeal Carcinoma should be focused on Guangdong province of China, and the key targets for prevention and treatment are rural men, especially after the age of 40. The mortality of Nasopharyngeal Carcinoma will decrease in the next five years.

• International Journal of High-Rise Buildings
• /
• v.5 no.4
• /
• pp.251-262
• /
• 2016

Tall Buildings have been one of the most prominent symbols of economic growth for nearly a century. Yet, in the aftermath of the tragedies of September 11, "signature" Tall buildings have become the focus of much debate. The structural systems today are undergoing a major evolution to address the ability of providing flexibility in the design and use of the building together with sustainability (Green) and cost-effective system. This paper describes a new invented structural system, evolutionary structural analysis and design of Tall buildings, which involves the entire analysis process, including conceptual and design stages and comparison with the existing Tall building. This study presents an new innovative structural system, Beehive (Hexagrid), for Tall buildings. The final results are achieved by modeling an 80 story Tall building with the optimized angle and topology of hexagon members by using a computer analysis, ETABS finite element analysis. The objective function of this system is to use one structural system in order to both maximize Eigen frequency for resisting dynamic responses and minimize mean compliance for static responses. Finite element analysis is carried out by using standardized materials. Optimal Hexagrid topologies with the highest stiffness are finally determined to resist both static and dynamic behaviors. Holistic design integration approaches between structures and facades to save energy for environmental control are studied. Innovative design ideas to control structural motion as well as to utilize that motion to harness energy are discussed. Considering abundant emergence of tall buildings all over the world in recent years, the importance of the studies presented in this paper cannot be overemphasized for constructing more sustainable built environments.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.107-108
• /
• 2011

Since the development of railway technology, the current urban Railway the first train line in the country for safe operation control automatic/unattended operation, automatic train operation equipment available (ATO) on time and reliable operation has introduced. ATO Automatic operation controlled by the value (Target velocity) and the feedback value (Actual velocity) by the error between the backing and braking of the train by repeated low energy efficiency. In this paper, given a fixed distance stations between time operation with minimal energy in the driving characteristics and driving trains are modeled. Therefore, in line 5 real route time sectional drive straight sections for experimental data analysis / draft Section / curved and section of the train on that line is selected according to the changing driving patterns to minimize the energy optimal driving patterns were presented.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.143-151
• /
• 2017

PURPOSES : The purpose of this study is to develop models of accidents occurring at circular intersections related to the time of day and night and driver gender, and to provide countermeasures for safer circular intersections. METHODS : Seventy intersections built before 2008 were surveyed for inclusion in the modeling. Traffic accident data from 2008 to 2014 were collected from the TAAS data set of the Road Traffic Authority. Sixteen variables explaining the accidents including geometry and traffic volume were selected from the literature and seven multiple linear regression models were developed using SPSS 20.0. RESULTS : First, the null hypotheses, that the number of traffic accidents are not related to driver gender or time of day, were rejected at a 5% level of significance. Second, seven statistically significant accident models with $R^2$ value of 0.643-0.890 were developed. Third, in daytime models by gender, when the right-turn-only lane was selected as the common variable, the number of lanes, presence of driveways and speed humps, diagrammatic exit destination sign, and total entering traffic volume were evaluated as specific variables. Finally, in nighttime models by gender, when the diagrammatic exit destination sign was selected as the common variable, total entering traffic volume, presence of right-turn-only lanes, number of circulatory road way lanes, and presence of splitter islands and driveways were identified as specific variables. CONCLUSIONS:This study developed seven accident models and analyzed the common and specific variables by time of day and gender. The results suggest approaches to providing countermeasures for safer circular intersections.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.552-561
• /
• 2016

For the prediction of hydrologic phenomenon, predicting future land use change is a very important task. This study aimed to compare and analyze the two land use change models, CLUE-S and SLEUTH3-R. The analysis of two models were performed based on the MSR value such that the model with more reliable MSR value can be recommended as an appropriate land use change prediction model. The model performance was examined by applying to the Gapcheon A watershed. Land use map of the study area of 2007 obtained from the Ministry of Environment was compared with the predicted land use map obtained from each of the two models. The result from both models showed somewhat similar results. The MSR value obtained from CLUE-S was 0.564, while that from SLEUTH3-R was 0.586. However, when land use map of 2010 was compared with predicted land use map obtained from the two models in same manner, the MSR value obtained from CLUE-S' was 0.500 while that from SLEUTH3-R was decreased to 0.397, an approximately 32.3% decrease from previous value of 2007. Moreover, SLEUTH3-R showed more sensitivity in conversion of urban areas, as compared to other land use types. Therefore, for the prediction of future land use change, CLUE-S model is more reliable than SLEUTH3-R.