• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.578-584
• /
• 2008

In this study, a extrusion process with torsion of the bottom die is investigated to improve the forming performance of conventional extrusion process. In the experiment, plasticine is used as a model material. The results of experiments are compared with the two numerical methods, the Experiment and the Finite Element Method(FEM). An attempt is made to link programs incorporating with the process variables obtained by commercial FEM software, DEFORM-3D a useful package. Numerical result is compared with experimental one. These results show that the torsional extrusion process is very useful process because this process can obtain the homogenous deformations.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.323-326
• /
• 2002

In this paper, we study the improved bounds on the performance of low-density parity-check (LDPC) codes over binary-input additive white Gaussian noise (AWGN) channels with belief propagation (BP) decoding in log domain. We define an extended Gallager ensemble based on a new method of constructing parity check matrix and make use of this way to improve upper bound of LDPC codes. At the same time, many simulation results are presented in this paper. These results indicate the extended Gallager ensembles based on Hamming codes have typical minimum distance ratio, which is very close to the asymptotic Gilbert Varshamov bound and the superior performance which is better than the original Gallager ensembles.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.26-37
• /
• 1994

A kinematically admissible velocity field for the numerical analysis of closed-die forging process of spur gear is proposed. The velocity field is divided into three regions of deformation. In the analysis, the involute curve is approximated to be straight line and the upper-bound method is used to calculate energy dissipation rate. A constant frictional frictional factor has been assumed on the contacting surfaces. The effects of root diameter, number of teeth, and friction factor are determined on the relative forging pressure. The frictionless relative pressure is independent of root diameter for the same number of teeth, but increases with the number of teeth on a given root diameter. In the presence of friction, the relative forging presure increasing root diameter at the start of forging, but decreases with increasing root diameter in the processing of forging.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.227-236
• /
• 2019

In practice, the natural slopes are frequently with soils of spatial properties and irregular features. The traditional limit analysis method meets an inherent difficulty to deal with the stability problem for such slopes due to the normal condition in the associated flow rule. To overcome the problem, a novel technique based on the upper bound limit analysis, which is called the discretization technique, is employed for the stability evaluation of complex slopes. In this paper, the discretization mechanism for complex slopes was presented, and the safety factors of several examples were calculated. The good agreement between the discretization-based and previous results shows the accuracy of the proposed mechanism, proving that it can be an alternative and reliable approach for complex slope stability analysis.

• Journal of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1227-1237
• /
• 2021

This paper is concerned with a reaction-diffusion logistic model. In [17], Lou observed that a heterogeneous environment with diffusion makes the total biomass greater than the total carrying capacity. Regarding the ratio of biomass to carrying capacity, Ni [10] raised a conjecture that the ratio has a upper bound depending only on the spatial dimension. For the one-dimensional case, Bai, He, and Li [1] proved that the optimal upper bound is 3. Recently, Inoue and Kuto [13] showed that the supremum of the ratio is infinity when the domain is a multi-dimensional ball. In this paper, we generalized the result of [13] to an arbitrary smooth bounded domain in ℝⁿ, n ≥ 2. We use the sub-solution and super-solution method. The idea of the proof is essentially the same as the proof of [13] but we have improved the construction of sub-solutions. This is the complete answer to the conjecture of Ni.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.77-83
• /
• 1996

This paper describes forging of trochoidal gears, which are being widely used in timing belt pulley, pump pulley etc., as a series of development of the simulator for non-axisymmetric elements. Kinematically admissible velocity fields for forging of trochoidal gear were proposed and the loads were calculated by numerical method. When the simulation was carried out, half pith of gear was divided into 6 deformation regions which have different velicity fields by assumptions and boundary conditions. The neutral surface was introduced into forging of trochoidal gears with flat punch and, for each step, it is assumed as a circle with its radius r$_{n}$. The experimental set-up was installed in 200 ton hydraulic press for forging. The billets, of A1 2218 aluminum alloy, were slightly phosphate-coated. It was shown that thd theoretical solutions, as upper bound, are useful to predict the forging load for forging of trochoidal gears, because thdt give estimates that are substantially higher than experimental loads.s.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1114-1122
• /
• 2018

In this paper, we propose a theoretical framework for provisioning marginal resources in wired and wireless computer networks which include Internet. In more detail, we propose a mathematical model for the upper bounds of marginal capacity in grid networks, where the resource is designed a priori by normal traffic estimation and marginal resource is prepared for unexpected events such as natural disasters and abrupt flash crowd in public affairs. To be specific, we propose a method to evaluate an upper bound for minimum marginal capacity for an arbitrary grid topology using the concept of a strong Roman domination number. To that purpose, we introduce a graph theory to model and analyze the characteristics of general grid structure networks. After that we propose a new tight upper bound for the strong Roman domination number. Via a numerical example, we show the validity of the proposition.

• Advances in materials Research
• /
• v.5 no.4
• /
• pp.263-277
• /
• 2016

Mechanical properties of $Al/Al_2O_3$ and $Al/B_4C$ composites prepared through powder metallurgy are estimated up to 50% $Al_2O_3$ and 35% $B_4C$ weight fractions using micromechanics models and experiments. The experimental Young's modulus up to 0.40 weight fraction of ceramic is found to lie closely between Ravichandran's/Hashin-Shtrikman lower/upper bounds, and close to self consistent method/Miller and Lannutti method/modified rule of mixture/fuzzy logic method single value predictions. Measured Poisson's ratio lies between rule of mixture/Ravichandran lower and upper bound/modified Ravichandran upper bounds. Experimental Charpy energy lies between Hopkin-chamis method/equivalent charpy energy/Ravichandran lower limit up to 20%, and close to the reciprocal rule of mixture for higher $Al_2O_3$ content. Rockwell hardness (RB) and Micro-hardness of $Al/Al_2O_3$ are closer to modified rule of mixture predictions.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1380-1397
• /
• 2018

The synchronous reluctance motor (SynRM) servo-drive system has highly nonlinear uncertainties owing to a convex construction effect. It is difficult for the linear control method to achieve good performance for the SynRM drive system. The nonlinear backstepping control system using upper bound with switching function is proposed to inhibit uncertainty action for controlling the SynRM drive system. However, this method uses a large upper bound with a switching function, which results in a large chattering. In order to reduce this chattering, a nonlinear backstepping control system using an adaptive law is proposed to estimate the lumped uncertainty. Since this method uses an adaptive law, it cannot achiever satisfactory performance. Therefore, a nonlinear backstepping control system using a reformed recurrent Hermite polynomial neural network with an adaptive law and an error estimated law is proposed to estimate the lumped uncertainty and to compensate the estimated error in order to enhance the robustness of the SynRM drive system. Further, the reformed recurrent Hermite polynomial neural network with two learning rates is derived according to an increment type Lyapunov function to speed-up the parameter convergence. Finally, some experimental results and a comparative analysis are presented to verify that the proposed control system has better control performance for controlling SynRM drive systems.