• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1106-1112
• /
• 2007

As a demand for high speed uplink packet services increases, the WCDMA enhanced uplink, also known as high speed uplink packet access (HSUPA), has been specified in release 6 by 3GPP. This HSUPA will provide various types of multimedia services, such as real-time video streaming, gaming, VoIP, and FTP. Generally, the performance of HSUPA is dominated by scheduling policy. Therefore, it is required to design a scheduling algorithm considering the traffic characteristics to provide QoS guaranteed services in various traffic environments. In this paper, we propose a scheduling algorithm considering the traffic characteristics to guarantee QoS in a mixed traffic environment. Finally, the performance of the proposed scheduling algorithm is evaluated in terms of average packet delay, packet delay jitter, and system throughput using a system level simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.888-897
• /
• 2007

In this paper, we propose an uplink dynamic resource allocation algorithm to increase sector throughput and fairness among users in 802.16e OFDMA TDD system. In uplink, we address the difference between uplink and downlink channel state information in 802.16e OFDMA TDD system. The simulation results show that not only an increment of 10% of sector throughput but higher level of fairness is achieved by round-robin using the FLR and the rate / margin adaptive inner closed-loop power control algorithm. The FLR algorithm determines the number of sub-channels to be allocated to the user according to the user's position. Also, we get 31.8% more sector throughput compared with the round-robin using FLR by FASA algorithm using uplink channel state information. User selection, sub-channel allocation, power allocation algorithms and simulation methodology are mentioned in Part I.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.459-468
• /
• 2015

In this paper, we consider an uplink multiuser hybrid beamforming system where an access point (AP) communicates with multiple users simultaneously. The performance of the uplink multiuser hybrid beamforming system depends on the effective channel which is given by the product of the channel matrix and the analog beams. Therefore, to maximize the performance, we need to obtain the channel information and then select the analog beams appropriately by using the acquired channel information. In this paper, we propose the channel estimation method and low complexity analog beam selection algorithm for the uplink multiuser hybrid beamforming system. Additionally, our analysis shows that the proposed low complexity analog beam selection algorithm provides much less complexity than the optimum analog beam selection algorithm. From the numerical results, we confirm that the proposed low complexity analog beam selection algorithm has little performance degradation in spite of much less complexity than the optimum analog beam selection algorithm under the equal system configuration.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.26-35
• /
• 2020

Herein, we consider uplink multiuser massive multiple-input multiple-output systems when multiple users transmit information symbols to a base station (BS) by applying simple space-time block coding (STBC). At the BS receiver, two detection filters for each user are used to detect the STBC information symbols. One of these filters is for odd-indexed symbols and the other for even-indexed symbols. Using constrained output variance metric minimization, we first derive a special relation between the closed-form optimal solutions for the two detection filters. Then, using the derived special relation, we propose a new blind adaptive algorithm for implementing the minimum output variance-based optimal filters. In the proposed adaptive algorithm, filter weight vectors are updated only in the region satisfying the special relation. Through a theoretical analysis of the convergence speed and a computer simulation, we demonstrate that the proposed scheme exhibits faster convergence speed and lower steady-state bit error rate than the conventional scheme.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.150-156
• /
• 2003

In this paper, an uplink MC-CDMA system incorporating multiuser detection and smart antennas has been considered. The performance of asynchronous as well as synchronous system is studied over a correlated Rayleigh multipath slow fading channel. A simplified array-processing algorithm suitable for slow fading situation is investigated to overcome the heavy computational complexity associated with Eigen solutions. The effect of variable data rate in the system performance is considered and effectiveness of antenna array to handle high data rate is discussed. A brief investigation on the system performance degradation due to correlated channel is also carried out. Based on the extensive simulation carried out, the performance of the asynchronous uplink system is found dramatically improved with antenna array and multiuser detection. Asynchronicity and channel correlation are found to affect the system performance significantly. The investigated simpli- fied algorithm produces similar results as Eigen solutions in slow fading situation with much reduced complexity.

• Journal of electromagnetic engineering and science
• /
• v.9 no.2
• /
• pp.61-65
• /
• 2009

Successive interference cancellation(SIC) for the uplink of MC-CDMA mobile communications systems is an effective method to improve performance. We propose a successive interference cancellation(SIC) technique for the uplink of MC-CDMA mobile systems with multiple receive antennas. The destination uses optimum combining(OC) to combine the signals from an OFDM Demodulator with multiple receiving antennas, and applies SIC processing to the combined signals. Achieved interference cancellation order is depends on the signal to interference-plus-noise ratio (SINR) at the output of the optimum combiner. Monte-Carlo simulations are employed to verify the proposed technique.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.313-322
• /
• 2006

We consider a power controlled code division multiple access (CDMA) system with multiple flow types. At each of the N nodes, there are F flow types with different signal-to-interference-and-noise-ratio (SINR) requirements. To keep the complexity of the transmitter low, we assume that each node uses the same power level for all its flows. The single flow case has been fully solved and is well-understood. We concentrate on the multiple flow case, and use a novel and different approach. For the uplink problem with N = 2 and F arbitrary, the necessary and sufficient conditions to have a solution are found and proved. For the general N > 1 uplink problem, we provide a necessary condition for the problem to have a solution and an iterative algorithm to find the optimum solution. For the downlink case with F > 1 some properties of the optimal sequences are obtained.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.473-493
• /
• 2019

5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular network uplink optimization algorithm is proposed to optimize the uplink utility of vehicles on the roads. Simulation results show that the proposed scheme can significantly improve the uplink vehicular network utility in vehicular networks to meet the URLLC requirements.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.466-474
• /
• 2007

Asymmetric networks that the downlink bandwidth is larger than the uplink bandwidth may cause the degradation of the TCP performance due to the uplink congestion. In order to solve this problem, this paper designs and implements the Dynamic Segment Size Control mechanism which offers a suitable segment size for current networks. The proposed mechanism does not require any changes in customer premises but suppress the number of ACKs using segment reassembly technique to avoid the uplink congestion. The gateway which adapted the Dynamic Segment Size Control mechanism, detects the uplink congestion condition and dynamically measures the bandwidth asymmetric ratio and the packet loss ratio. The gateway reassembles some of segments received from the server into a large segment and transmits it to the client. This reduces the number of corresponding ACKs. In this mechanism, the SACK option is used when occurs the bit error during the transmission. Based on the simulation in the GEO satellite network environment, we analyzed the performance of the Dynamic Segment Size Control mechanism.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.193-196
• /
• 2000

A new medium access control protocol is proposed to support stable wireless Internet services. Using the characteristics of the uplink Internet traffic and a Voice-Packet multi-session mode, the proposed protocol transmits the uplink Internet traffic via the voice traffic channel of silent duration in a multi-session mode. Out simulation results show that the proposed protocol guarantees stable wireless Internet services under heavy loads.