• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1941-1948
• /
• 1997

In this paper, the power efficient linear upconversion mixer which is a functional circuit in transmit path of intermediate frequency(IF) part of Code Division Multiple (CDMA) cellular phone was explained. In generally, the low CMOS devices limits the implementation of upconversion mixer especially for lower loads. Using replica transconductor, the linear range is extended up to the limit. Thiscircuit was imprlemented using $0.8{\mu}\textrm{m}$ N-well CMOS technology with 2-poly/2-metal. The active area of chip is $0.53mm{\times}0.92mm$. The power consumption is 30mW with 3.3V suply voltage. The 1dB conpression characteristics is -27.3dB with $25{\Omega}$. load and being applied by 2-tone input signal. The mixer operates properly above 200MHz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1058-1063
• /
• 2010

In this paper, we designed self-frequency synchronizing circuit using image rejection mixer(IRM) and single-sideband(SSB) up-converter which can effectively eliminate the image frequencies occurred in multi-channel super-heterodyne receivers and help us to match inter-channel phase. Also the self-frequency synchronizing circuit simplifies system because there need no extra devices for making intermediate frequency(IF) by creating the local signal within several nanoseconds by means of generating the same frequency of IF signal and modulating radio frequency(RF) signal. We adopt the limiting amplifier for the purpose of protecting the circuit from spurious signals which come from the front end side having wide instantaneous bandwidth characteristics and constantly injecting same level into the input local signal of IRM. The IRM we fabricated has image rejection ratio of 27dB, which is good over 7dB for foreign company's. Also, the SSB up-converter we fabricated has 1dB compression point of 18dBm, which is good over 16dB for foreign company's. And the size is compact about one-forth.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.2
• /
• pp.106-115
• /
• 2005

Bio-diesel as fatty acid methyl ester was derived from such oils as soybean, peanut and canola oil by lipase catalyzed continuous trans-esterification. So the activation of lipase(Novozym - 435) was kept to be up to 4:1, the limiting molar ratio of methanol to oil under one-step addition of methanol due to the miscibility of oil and methanol through the static mixer for 4hrs and the elimination of glycerol on the surface of lipase by 7wt% silica gel. Therefore the overall yield of fatty acid methyl ester from soybean oil appeared to be 98% at 50$^{\cdot}C$ of reaction temperature under two-steps addition of methanol with 2${\times}$2:1 of methanol to oil molar ratio at an interval of 5.5hrs, 7wt% of lipase, 24 number of mixer elements, 0.2ml/min of flow rate and 7wt% of silica gel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1571-1577
• /
• 1994

This paper is designed and implemented mixer of 12GHz/14GHz as up-conversion. Observation that harmonics and intermodulation power level varied by two signal power level and bias obtained operation points of mixer. Finally, optimum operation points shows that $P_{RF}$(radio signal frequency power level). $P_{LO}$(local oscillation power level) is below -30[dBm], -2[dBm] respectively. Simultaneously $V_{DS}$ is 2.7[V]and $V_{GS}$ is -0.2[V].

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.328-328
• /
• 2004

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1549-1554
• /
• 2014

This study analyzed the production and heat stability of an emulsion made from buckwheat sprout extracts with high rutin content. To obtain high rutin contents, buckwheat was sprouted and the polyphenols and rutin were extracted from buckwheat sprouts. Concentrated extracts were made into an emulsion using a homo mixer and hydraulic homogenizer, after which heat stability was analyzed. The polyphenol contents were highest in ground sprouts grown for 8 days (10.66 mg/g), which was 10 times higher than those of buckwheat seeds. Extraction with 50% ethanol after blanching was the most effective method for obtaining extracts with higher polyphenol content and rutin content. Extracts were concentrated up to 60% soluble solid content and then emulsified using a homo mixer and hydraulic homogenizer. Heat stability of the emulsion passed through the hydraulic homogenizer was slightly higher than that made using the homo mixer. The heat stability of the emulsion was more strongly affected by heating time than temperature. In conclusion, the buckwheat concentrate emulsion passed through the hydraulic homogenizer was more heat stable than buckwheat extract alone.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.40-48
• /
• 2008

Air mixing system which is composed of air pressure control system, hot pipe system and air mixer, is the facility for mixing hot air($1000^{\circ}C$, 10kg/s) from storage air heater (SAH) and decompressed air($20^{\circ}C$, 15kg/s) from high pressure air supply system. Air pressure control system reduce the pressure of the air, from 32MPa to 3.5 MPa and supply the decompressed air to air mixer. The hot pipe system supply hot air from SAH to air mixer which mix hot with the decompressed air from air pressure control system. Fully mixed air flow rate is 25kg/s and mixed temperature is up to $400^{\circ}C$. So, we can expand the operating envelop of the supersonic ground test facility to low Mach number and low altitude region.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1009-1014
• /
• 2012

This paper has proposed a 2,500 MHz ~ 2,570 MHz 0.13-${\mu}m$ CMOS RF front-end transmitter for LTE-Advanced systems. The proposed RF front-end transmitter is composed of a quadrature up-conversion mixer and a driver amplifier. The measurement results show the maximum output power level is +6 dBm and the suppression ratio for the image sideband and LO leakage are better than -40 dBc respectively. The fabricated chip consumes 36 mA from a 1.2 V supply voltage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.256-261
• /
• 2011

We demonstrate 3-Gb/s wireless link using a 60-GHz receiver front-end fabricated in $0.25-{\mu}m$ SiGe:C bipolar complementary metal oxide semiconductor (BiCMOS) and a mixed-mode quadrature phase-shift keying (QPSK) demodulator fabricated in 60-nm CMOS. The 60-GHz receiver consists of a low-noise amplifier and a down-conversion mixer. It has the peak conversion gain of 16 dB at 62 GHz and the 3-dB intermediate-frequency bandwidth of 6 GHz. The demodulator using 1-bit sampling scheme can demodulate up to 4.8-Gb/s QPSK signals. We achieve successful transmission of 3-Gb/s data in 60 GHz through 2-m wireless link.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2589-2591
• /
• 2002

송수신기의 방식에는 직접변환 방식과 기저대역 신호와 LO(Local Oscillator)를 혼합하여 interpolation 기법을 사용하여 중간 주파수 단계까지 up conversion을 하고 두 번째 LO와 IF신호를 혼합하여 RF신호로 변환하여 송신하는 헤테로다인 방식이 존재한다. 본 논문에서는 이런 송수신기 방식 중에서 헤테로다인 방식을 적용하여 QPSK에서의 digital up /down converter를 Simulink 환경에서 설계 및 구현하였다. Up converter는 4배의 interpolation 필터와 4단짜리 cascaded integrate-comb(CIC)필터를 사용하여 입력데이터의 샘플 레이트를 클럭 레이트까지 증가시켰으며, numerically controlled oscillator (NCO)와 mixer를 사용하여 신호를 변조하였다. Down converter의 구조는 up converter와 동일하며 단지 up converter의 반대순서로 구성되어있다. 이런 모든 과정을 Simulink를 이용한 시뮬레이션과 스펙트럼 분석기를 사용하여 검증해 보았다.