• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.60-68
• /
• 2018

The Housing Act amended allows vertical extension up to three floors and increases the units of housing (or total floor area) to site up to 15%. Currently, the feasibility of performing vertical extension is evaluated based on safety diagnosis provisions and manuals with preliminary investigations on slope, uneven settlement, load-bearing capacity, and durability. However, a need for more reasonable evaluation methodology for the preliminary investigation is still required because the current procedures are borrowed from safety diagnosis provisions and manuals for reconstruction without detailed examinations on evaluation criteria and sampling methods. Accordingly, this study is intended to suggest a method to obtain feasible sampling size for durability assessment by statistically analyzing the safety evaluation data sets on concrete carbonation and steel corrosion obtained from apartment complexes. The results of this study are expected to be beneficial for establishing more reasonable field sampling size, and in turn, more reliable durability assessment protocol for vertical extension.

• Korean Journal of Human Ecology
• /
• v.16 no.2
• /
• pp.395-405
• /
• 2007

The women selected by random sampling were classified into four groups by their body cathexis and Make-up attitude in order to investigate differences in Clothing Value and Make-up behavior. The result are as follows. Cluster was classified into four groups: positive congruity(G1), positive incongruity(G2), negative congruity(G3), negative incongruity(G4). Four groups showed meaningful difference each other between the peculiarity of Clothing value and Make-up behavior. Make-up behaviors were different at the peculiarity of minutely divided groups under the standard of physical satisfaction and Make-up attitude, and they showed difference in the influence of value affected to each behavior. So it was testified that Make-up behavior can be different depending on the value of respective persons.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1175-1182
• /
• 2021

The receiver of each radio telescope of KVN, has a sampler that converts astronomical radio signal to digital data. The ability of this sampler (the bandwidth, sampling frequency, and sampling bits) is improved by sqrt(n), if the bandwidth is increased by n times, and the number of observable objects increases exponentially in the case of continum spectrum radio sources. As the bandwidth increases, there are the more spectrum lines that can be simultaneously monitored in the radio source. This will greatly expand the research area in astronomical radio observation. For this reason, we are trying to independently develop the technology of the fast digital sampler. Therefore, based on the research experience and technology accumulated so far, An ability of sampling up to 3.5 GHz, that can vary the sampling frequency and can observe in a wider band, was designed and made for proto-type. In this study, we introduce the development details and test results for new sampling system.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.83-90
• /
• 2008

EThe digitalized image information has various resolution, and it has been developed for several technologies to resize image depending on user's requests and applications. Recently the algorithm using edge information for good image/video quality on up-sampling was introduced, and the pre-processing procedure is required for edge extraction. Than, the predicted direction in intra prediction used in H.264/AVC has the similarity up to 80% for the edge information, so I propose the image up-sampling method using edge information. In proposed method, the image quality is similar to result of adapting n'th kernel. and the method reduces the number of calculation by about 50%.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.2
• /
• pp.119-134
• /
• 2021

The data set collected during the night of the discovery of a minor body constitutes a too-short arc (TSA), resulting in failure of the differential correction procedure. This makes it necessary to recover the object during subsequent nights to gather more observations that will allow a preliminary orbit to be calculated. In this work, we present a recovery technique based on sampling the admissible region (AdRe) by the constrained Delaunay triangulation. We construct the AdRe in its topocentric and geocentric variants, using logarithmic and exponential metrics, for the following near-Earth-asteroids: (3122) Florence, (3200) Phaethon, 2003 GW, (1864) Daedalus, 2003 BH84 and 1977 QQ5; and the main-belt asteroids: (1738) Oosterhoff, (4690) Strasbourg, (555) Norma, 2006 SO375, 2003 GE55 and (32811) Apisaon. Using our sampling technique, we established the ephemeris region for these objects, using intervals of observation from 25 minutes up to 2 hours, with propagation times from 1 up to 47 days. All these objects were recoverable in a field of vision of 95' × 72', except for (3122) Florence and (3200) Phaethon, since they were observed during their closest approach to the Earth. In the case of 2006 SO375, we performed an additional test with only two observations separated by 2 minutes, achieving a recovery of up to 28 days after its discovery, which demonstrates the potential of our technique.

• Structural Engineering and Mechanics
• /
• v.32 no.1
• /
• pp.21-36
• /
• 2009

An importance sampling method is presented for computing the first passage probability of elasto-plastic structures under stochastic excitations. The importance sampling distribution corresponds to shifting the mean of the excitation to an 'adapted' stochastic process whose future is determined based on information only up to the present. A stochastic control approach is adopted for designing the adapted process. The optimal control law is determined by a control potential, which satisfies the Bellman's equation, a nonlinear partial differential equation on the response state-space. Numerical results for a single-degree-of freedom elasto-plastic structure shows that the proposed method leads to significant improvement in variance reduction over importance sampling using design points reported recently.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.47-54
• /
• 1997

This paper presents two results on intersymbol interferences in baseband digital communication over an additive white Gaussian noise channel-the interferences due to mismatched square-root raised-cosine filters, in which the filters have different roll-off factors, and / or due to sampling-time jitter. The result for the mismatched filters is that even the jitter-free sampling causes intersymbol interference and it is negligibly small for a wide range of signal-to-noise ratio up to 10dB, for the roll-off factor ranging from 0.2 to 0.5, the mismatch loss being within 0.1dB from the optimum at around 10-6 .For jitter interference an approximation formula for the bit error probability is derived in case of the matched filters, which shows how the roll-off factors and the amount of jitter affect the system performance. The formula is reasonably accurate.

• Communications for Statistical Applications and Methods
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2011

This paper suggests a ratio-cum product estimator of a finite population mean using information on the coefficient of variation and the fcoefficient of kurtosis of auxiliary variate in stratified random sampling. Bias and MSE expressions of the suggested estimator are derived up to the first degree of approximation. The suggested estimator has been compared with the combined ratio estimator and several other estimators considered by Kadilar and Cingi (2003). In addition, an empirical study is also provided in support of theoretical findings.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.107-108
• /
• 2007

In this paper, a cosine-modulated filter bank with a modified synthesis part is proposed for arbitrary scaling of images, whereby down/up-sampling kernels based on a compactly supported sampling function (CSSF) are utilized. Also, an optimized adaptive interpolation technique is incorporated into the filter bank structure to compensate for quality degradation arising in scaled images. Finally, simulation results verify that high quality images with arbitrary sizes can be obtained by applying the proposed approach.