• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.151-156
• /
• 2000

A vibration in a high-speed machine may lead to machinery malfunction and even catastrophic failure. So solving the vibration problem is a fundamental requirement for the stability of the high-speed machine. The flywheel energy storage system using superconducting magnetic bearings is a device to store electrical energy as rotational kinetic energy by motor and to convert it to electrical by generator when necessary. The high-speed rotating flywheel has large amplitude at a critical speed. And it has an unstable behavior by the electric torque at the first stage of the energy generation. In this paper, the stability analysis is performed with an analytical model and equations of motion-which is considered the effect of the electric torque-to identify the stable driving condition and the dynamic behavior.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.161-166
• /
• 2011

This paper proposes an algorithm for determining critical generator lists using accelerating power and synchronizing power coefficient (SPC), and critical generator group (CGG) from CGG candidates, which is a combination of critical generators. The accurate determination of CGG provides a more accurate energy margin while providing system operator with information of possible unstable generator group. Classical transient energy function (TEF) method selects the critical generators with big corrected kinetic energy of each generator at the moment of fault removal. However, the generator with small acceleration after fault, that is, the generator with small corrected kinetic energy, is also likely to belong to CGG if the generator has small synchronizing power. The proposed algorithm has been verified to be effective compared with the classical TEF method. We utilized the power system of Korean Electric Power Corporation(KEPCO) as a test system.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.142-147
• /
• 2008

Limited fossil fuels and unstable energy supply are considered as one of the critical problems in architecture requiring large amounts of energy. In order to this challenge, environment-friendly architecture design is required. Especially, Application of solar energy as a clean energy source and one kind of renewable energy. Many sites however are mainly concentrated in the developed countries, and are scarcer within the developing world. Simple radiation estimation models using meteorologically observed input parameters are often used in the applications requiring rough estimations of solar radiation. In this paper, measurements of global solar radiation and cloud data hours in climatological locations in South Korea are used to develop an estimation in solar radiation. The results of measured data are compared with the results obtained from equations, internationally accepted correlations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.108-113
• /
• 2004

The compressive axial collapse tests were performed to investigate energy absorption characteristics of Al/CFRP compound tubes which are aluminum tubes wrapped with CFRP (Carbon Fiber Reinforced Plastics) outside the aluminum circular and square tubes. Based on collapse characteristics of aluminum tubes and CFRP tubes respectively, the axial collapse tests were performed for Al/CFRP compound tubes which have different fiber orientation angles. Test results showed that Al/CFRP compound tubes supplemented the unstable brittle failure of CFRP tubes due to ductile nature of inner aluminum tubes. In the light-weight aspect, specific energy absorption were the highest for Al/CFRP, CFRP in the middle, and aluminum the lowest. Also, specific energy absorption of circular tubes was higher than square tubes'. It turned out that fiber orientation angle of Al/CFRP compound tubes influence specific energy absorption together with the collapse modes of the tubes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 추계학술대회논문집; 반도아카데미, 26 Nov. 1993
• /
• pp.77-83
• /
• 1993

In this paper, the dynamics of a 2-DOF not 1:1 resonant Hamiltonian system are studied. In the first part of the work, the behaviors of special periodic orbits called normal modes are examined by means of the harmonic balance method and their approximate stability ar analyzed by using the Synge's concept named stability in the kinematico-statical sense. Secondly, the global dynamics of the system for low and high energy are studied in terms of a perturbation analysis and Poincare' maps. In this part, one can see that the unstable normal mode generates chaotic motions resulting from the transverse intersections of the stable and unstable manifolds. Although there exist analytic methods for proving the existence of infinitely many periodic orbits, chaos, they cannot be applied in our case and thus, the Poincare' maps constructed by direct numerical integrations are utilized fot detecting chaotic motions. In the last part of the work, the existence of arbitrarily many periodic orbits of the system are proved by using a subharmonic Melnikov's method. We also study the possibility of the breakdown of invariant KAM tori only when h>h$_{0}$ (h$_{0}$:bifurcating energy) and investigate the generality of the destruction phenomena of the rational tori in the systems perturbed by stiffness and inertial coupling.

• STI Policy Review
• /
• 제4권1호
• /
• pp.135-161
• /
• 2013

This paper examines Japan's Science and Technology (S&T) Basic Plans in accordance with its S&T Basic Law. The Basic Plans promote two major innovation (Green Innovation and Life Innovation) towards the creation of new markets and jobs, specifically under the Fourth S&T Basic Plan enacted on August 2011. Successful smart community demonstration projects at four urban localities were launched under plans to promote Green Innovation research and development of renewable energy technologies. However, the expectation that renewable energy such as solar or wind power can replace nuclear power is not backed by sufficient evidence. Furthermore, the electricity produced by these sources is expensive and unstable owing to its reliance on weather conditions. The Fukushima nuclear power plant accident on March 2011 has also seriously affected Japan's future energy plans. According to a government estimate, electricity charges would double if nuclear power generation were abandoned, imposing a heavy burden on the Japanese economy. Japan is in need of energy policies designed on the basis of more far-sighted initiatives.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.84-87
• /
• 2000

Square tubes used for vehicle structure components have an important role on keeping its stiffness and preserving occupant safety in vehicle collision and rollover in which it experience axial collapse, bending collapse or both. Bending collapse, which absorbs kinetic energy of the impact and retains a survival space for the occupant, is a dominant failure mode in oblique collision and rollover. Thus, in this paper, the bending collapse characteristics such as the maximum bending moment and energy absorption capacity of the square tube replaced by light-weight material were evaluated and presented. The bending test of cantilever tubes which were fabricated with aluminum, GFRP and aluminum/ GFRP hybrid by co-curing process was performed. Then the maximum bending moment and the energy absorption capacity from the moment-angle curve were evaluated. Based on the test results, it was found that aluminum/ GFRP hybrid tube can show better specific energy absorption capacity compared to the pure aluminum or GFRP tube and can convert unstable collapse mode which may occur in pure GFRP tube to stable collapse mode like a aluminum tube in which plastic hinge is developed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.641-647
• /
• 2008

Since korea must get 5.2% reduction of green gas emission and insecurity of economic impact is on the increase due to unstable oil market, the demands of energy saving techniques are increasing. In this paper, we investigate necessity of development of enormous energy used cleanroom energy saving techniques furthermore we also investigate the adoption of dependability management system to develop the energy saving cleanroom development process.

• 세라미스트
• /
• 제22권2호
• /
• pp.122-132
• /
• 2019

Wearable electronic devices with batteries must be lightweight, flexible and highly durable. Most importantly, the battery should be able to self-generate to operate the devices without having to be too frequently charged externally. An eco-friendly energy harvesting technology from various sources, such as solar energy, electromagnetic energy and wind energy, has been developed for a self-charging flexible battery. Although the energy harvesting from such sources are often unstable according to the surrounding environment, the energy harvesting from body movements and vibrations has been less affected by the surrounding environment. In this regard, flexible piezoelectric modules are the most attractive solution for this issue, because they convert mechanical energy to electrical energy and harvest energy from the human body motions. Among the various flexible piezoelectric modules, piezoelectric nanofibers have advantages when used as an energy harvester in wearable devices, due to their simple manufacturing process with good applicability to polymers and ceramics. This review focused on diverse flexible piezoelectric nanofibers and discusses their applications as various energy harvesting systems.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.84-91
• /
• 2002

A new composite control method for a carriage balancing single inverted pendulum system is proposed and applied to swing up the pendulum and to stabilize it under the state constraint. The target inverted pendulum system has an extremely limited length of the cart(below 16cm). The proposed swing-up controller comprises a sliding mode control algorithm and an optimal control algorithm based on two regions: the region near the inverted unstable equilibrium position and the rest of the state space including the downward stable equilibrium position. The sliding mode controller uses a switching control action to converge along the specified path(hyperplane) derived from energy equation from a state around the path to desired state(standing position). An optimal control method is also used to guarantee the stability at unstable equilibrium position. Compared with the reported controllers, it is simpler and easier to implement. Experimental results are given to show the effectiveness of this controller.