• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2004

This paper deals with the automatic flight control system for an unmanned target drone which is operated by an army as an anti-air gun shooting training. By automation of unmanned target drone that is manually operated by external pilot, pilot can reduce workload and an army can reduce the budget. Most UAVs which are developed until today use high-cost sensors as AHRS and IMU to measure the attitude, but those are contradictory for the reduction of budget. This paper says the development of low-cost automatic flight control system which makes possible of automatic flight with low-cost sensors. We have developed the integrated automatic flight control system by integrating electricity module, switching module, monitoring module and RC receiver as an one module. We also prove the performance of automatic flight control system by flight test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.16-21
• /
• 2011

Bathymetry which is mainly used on the earth or the sea can be surveyed directly by a person who is on a surveying ship or in a way one estimates the target through a surveying ship. However, the surveying ship which is being used now is divided into a manned and unmanned system and it's difficult to deal with it appropriately according to the water depth or the condition of weather. Therefore, this study will invent the surveying ship that can measure the water depth with the unmanned remote control system in the place where it's difficult to for man access because of a bad weather or a vast area. There are two methods in the control system of the manned and unmanned surveying ship which has been developed in this study. One is an automatic control which moves on the path set by the user in advance and the other is the optimized passive control in which the control station can manage the direction and speed of a surveying ship directly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2317-2322
• /
• 2009

In this paper, look into the applicable communication for unmanned vehicle system development, and make an alternative idea to IEEE 802.11a. "IEEE 802.11a" is differently from "IEEE 802.11b/g"-which used to 2.4GHz ISM band-as it use OFDM modulation system of 5GHz band, as contrasted with "IEEE 802.11b/g" of ISM band, it has advantage against falling-off the capability caused by interfered, and provide maximum 54Mbps communication speed. Made a priority tested Soft Roaming and Hard Roaming to ensure the sound boom of unmanned vehicle in the flat parking. According to the each effect value, Present a most suitable method of applicable to "IEEE 802.11a" to unmanned vehicle system.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.603-609
• /
• 2008

Manta-type Unmanned Undersea Test Vehicle(MUUTV) is based on the same design concept as Unmanned Undersea Vehicle called Manta Test Vehicle(MTV), which was originally built and operated by the Naval Undersea Warfare Center(Lisiewicz et al., 2000, Sirmalis et al. 2001). The authors carried out the sensitivity analysis of the response of manoeuvring motion of MUUTV to changes in hydrodynamic derivatives, In order to calculate the sensitivity indices of hydrodynamic derivatives on MUUTV, the method by Sen(2000) was adopted Basically the dynamic mathematical model with six degrees of freedom by Feldman(1979) is used but a little revised, refered to Sohn et al.(2006) and some experiment in circulating water channel. Through the present research, some hydrodynamic derivatives of significance are found out, and also the numerical simulation using simplified mathematical model based on result of sensitivity analysis is ascertained to be enough for prediction of manoeuvring characteristics of MUUTV.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.35-47
• /
• 2018

Tree height is information that is used as a parameter for variety of tasks related to forests. Specifically, customized topics related to forests such as afforestation map are also used for production. In order to calculate tree height information, a field survey or drawing was using aerial photographs. However, there is a problem that is costing a lot of time and money. Therefore, it was suggested to calculate tree height using aerial photographs taken every two years. Thus, the method for calculating tree heights was validated by unmanned aerial photogrammetry, and tree heights were calculated using outputs generated by unmanned aerial photogrammetry applied to the unmanned aerial photograph and Aerial photograph DB. The comparison of calculated tree heights shows that the measures proposed in this study are efficient. and We expect to improve the usability of aerial photographs DB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.18-24
• /
• 2014

In this paper, the optimum placement of airborne line-of-sight (LOS) datalink directional antenna to minimize the datalink loss within the operation range of unmanned aerial vehicle (UAV) is analyzed by using the electromagnetic (EM) simulation. In quick banking of UAV, the datalink loss is occurred due to the electromagnetic distortion and transmission loss by the fuselage blockage. In general, the banking angle of UAV is limited to prevent the datalink loss. However, in this case, there is the problem that the mission performance ability is largely limited by the banking radius increase. To solve this problem, the optimum placement to mount the airborne LOS datalink 1-axis directional antenna on both the top and bottom surfaces of fuselage is analyzed by using EM simulation. The 1-axis antenna with large vertical beamwidth is used because the banking angle of UAV is dependent on the vertical beamwidth of antenna. Also, there is the benefit to reduce largely the weight because the 1-axis antenna can be mounted instead of the 2-axis one.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.225-233
• /
• 2011

In this paper, we propose a remote control station based on the awareness of various combat field situation in order for operating multiple unmanned ground vehicles. Our remote control station is capable of sending a variety of messages designed for carrying out the skillful movement for collaborate among unmanned ground vehicles, gathering the information related with combat field situation, and completing the assigned missions which are described by operator in advance. To verify the effectiveness of our proposal, we develop the sophisticated remote control station and conduct a great many remote operating tests for multiple unmanned ground vehicles.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.684-690
• /
• 2010

Digitalized Image Information is variously used like to substitute or help human's visual ability. Unmanned observation Camera is useful for the preventing disaster, risk factor and object observation but it is mostly to depend on awareness for human's vision. The purpose of this paper is to show that Unmanned Aerial Camera carries out object recognition and autonomous position tracking. when the informations about a specific object are given. For this purpose, we have to solve complicated problems like change according to object movement and variation of color and brightness information with refraction, interference and scattering of light and noise from environmental factors like weather. But, as the first step we limit the scope of this study with simplified environment in this paper. Our goal is the study and experience about object recognition and tracking via simplified environment with unmanned aerial camera. We obtained successful results of this study and experiment.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.335-341
• /
• 2012

Purpose: While an unmanned helicopter has been extensively used for spraying chemicals on agricultural crops, its low utilization (two months per year from July to August) has recently become an issue. This study aimed to increase the utilization of the unmanned helicopter. The centrifugal rice seeder, a mounting device for rice seeding for unmanned helicopter was developed and assessed its performance. Methods: The concept of the centrifugal spraying device was to obtain design criteria for centrifugal distribution. Four types of blade shapes namely straight, curved, straight wing and curved wing were developed and used. The rotational speed of the blades was tested at 1,000, 1,200 and 1,400 rpm. Results: The blade shapes, rotational blade speed and angle of trajectory were theoretically analyzed and results were validated with a series of laboratory experiments. Conclusions: The curved wing blades provided the distribution uniformity (DU) at 1,200rpm of rotational speed and 60 degree of seed drop point. The spray uniformity of 4.2% was also achieved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.611-619
• /
• 2016

This paper proposes a collision prevention system for an agricultural unmanned helicopter. The collision prevention system consists of an obstacle detection system, a mapping algorithm, and a collision avoidance algorithm. The obstacle detection system based on a LiDAR sensor is implemented in the unmanned helicopter and acquires distance information of obstacles in real-time. Then, an obstacle mapping is carried out by combining the distance to the obstacles with attitude/location data of the unmanned helicopter. In order to prevent a collision, alert is activated to an operator based on the map when the vehicle approaches to the obstacles. Moreover, the developed collision prevention system is verified through flight test simulating a flight pattern aerial spraying.