• Journal of Korean Academy of Nursing Administration
• /
• v.10 no.1
• /
• pp.37-48
• /
• 2004

Purpose: This study was investigated to identify the relationship among hospital nursing organizational structure(decentralization, communication, bed/nurse ratio), process(nurses' job satisfaction, nurses' clinical experiences, nurses' unit experiences), and nursing outcome(patient satisfaction, physiologic adaptation, length of stay, number of complication). Method: The subjects consisted of 86 hysterectomy patients and 23 nurses in gynecology unit. Data were collected from May 16, 2002 to August 15. 2003 by the structured questionnaires and chart review. Data analysis was done with ANOVA, Pearson's correlation coefficient, path analysis. Result: Relationship between organizational structure and process ; Bed/nurse ratio was negatively related to nurses' job satisfaction(r=- .37, p<.05), and nurses' clinical experience(r=- .69, p<.00). Decentralization(r=.42, p<.05) and comunication(r=.61, p<.00) were positively related to nurses' clinical experiences. Relationship between process and nursing outcome ; There was a significant relationship between nurses' unit experiences and patient satisfaction(r=.63, p<.00), nurses' job satisfaction and physiologic adaptation(r= .44, p<.05), nurses' unit experiences and physiologic adaptation(r=.64, p<.00), Relationship between organizational structure and nursing outcome ; Decentralization and communication were positively related to patient satisfaction(r=.86, p<.00 ; r=.88, p<.00) and physiologic adaptation(r=,51, p<.01, r=.64, p<.00). Conclusion: Nurses' unit experience, communication, decentralization were significant variables for patient satisfaction. Nurses' unit experience, nurses' job satisfaction, communication were significant variables for patient physiologic adaptation.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.81-90
• /
• 2010

The existing most studies on the apartment sales prices have been limited to relatively small size apartment complexes and have not categorized the apartment complexes based on the number of households. Some of them uses the apartment-related indices such as regional value estimates, sales unit price, and view right values. In the case of Seoul Metropolitan Area, the size of apartment complex has been growing to the level of large complex over more than 1,000 households through new town development, redevelopment and reconstruction. People prefers to choose a large scale complex instead of small complex based on their perception that a large scale apartment complex provides more conveniences in living. The result of this analysis revealed that the variables chosen as important determinants of the hedonic price model for large scale apartment complexes were square meters of apartment unit, rent/price ratio, number of bays, distance to the nearest subway station, and heating system method. This means that the sales price of apartment unit will be higher as the square meters of apartment unit increase, as the rent/price ratio decreases, as the distance to the nearest subway station increases, and as the number of bays increase.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.303-308
• /
• 1997

In this paper, we analyzed the spectroscopic properties of strip to analyzer urine qualitatively & quantitatively and make urine analyzer system stable by spectroscopy, and research the property of preamplifier unit. The analysis of spectroscopic properties of 10 pads in the strip is used for determine the wave length of light source of optic detector unit and used for basic materials which are necessary that we develop the algorithm analyzing the density grade of pad accurately. We make preamplifier unit by using the current to frequency method to measure the distribution of pad color. We implemented urine analyzer system. This system's hardware is composed of measuring unit for detect of distribution density of strip pad, main processing unit, communication unit, interface device, thermal printer, and indicator. The software consists of the program which manage the argument of test, proportion initial value of urine analyzer and calibrate analyzed result.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.910-920
• /
• 1990

This paper presents a method of constructing an Arithmetic Operation Unit Systems (A.O.U.S.) over Galois Field GF(2**m) for the purpose of the four arithmetical operation(addition, subtraction, multiplication and division between two elements in GF(2**mm). The proposed A.O.U.S. is constructed by following procedure. First of all, we obtained each four arithmetical operation algorithms for performing the four arithmetical operations using by mathematical properties over GF(2**m). Next, for the purpose of realizing the four arithmetical unit module (adder module, subtracter module, multiplier module and divider module), we constructed basic cells using the four arithmetical operation algorithms. Then, we realized the four Arithmetical Operation Unit Modules(A.O.U.M.) using basic cells and we constructd distributor modules for the purpose of merging A.O.U.M. with distributor modules. Finally, we constructed the A.O.U.S. over GF(2**m) by synthesizing A.O.U.M. with distributor modules. We prospect that we are able to construct an Arithmetic & Logical Operation Unit Systems (A.L.O.U.S.) if we will merge the proposed A.O.U.S. in this paper with Logical Operation Unit Systems (L.O.U.S.).

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.282-289
• /
• 2016

Traditional construction method of the stern tube is difficult to control the process and needs excessive working hours. Recently in order to resolve these issues, stern tube unit has been installed for some commercial vessels. The stern tube unit is a monolithic structure of bush and related components. The purpose of this study is to carry out a feasibility study for application of the stern tube unit for a 174K twin skeg LNG carrier. In this study, a 19,000 TEU container carrier installing the stern tube unit has been selected to compare with the deformations of stern for a 174K twin skeg LNG carrier.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.577-582
• /
• 2012

Recently, noise reduction of air-conditioner is one of the important design factors for high quality product. Especially, customer complaints arise due to noise problem of the outdoor unit. After the operation of air-conditioner start, noise level of outdoor unit is increased gradually and sometimes abnormal noise occurs until it reaches steady state condition. The aim of this paper is to investigate the relation between noise of outdoor unit and thermodynamic properties of cycle at transient condition of room air-conditioner. In order to find out the noise characteristics of outdoor unit, noise and vibration measurements are carried out. Also, the thermodynamic properties of compressor and heat exchanger are measured by using temperature and pressure sensors and experimental results are discussed. Finally, we find out the relation between noise and cycle properties at starting of room air-conditioner and the improvement method to reduce noise level is proposed.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.354-359
• /
• 2008

The purpose of this study is to find out the changes on the metropolitan apartment unit plans based on the interior spaces for women such as master bedroom, bathroom and attached spaces to the master bedroom, living room, diningroom, kitchen, utility room, and balcony. This study used the content analysis method, space syntax. Contents were the floor plans with 3 rooms type and limited to about $105m^2$ among drawings of an apartment encyclopedia. Above all, 174 unit plans were analyzed until now. Specifically, using $S^3$-Convex program, the integration and control value periodically of the interior spaces for women(master bedroom, bathroom and attached spaces to the master bedroom, living room, diningroom, kitchen, utility room) is understood. Second, using SPSS package 16.0, relative size of the interior spaces for women on the unit floor plan is understood periodically. Finally, the changes on the apartment unit plans based on a woman' aspect after 1980's is reanalyzed.

• Journal of the Korean housing association
• /
• v.18 no.6
• /
• pp.93-101
• /
• 2007

This study was to find out users' satisfaction on the dormitory of high school in Jeonju City and to propose it's physical environmental improvement directions. This was performed by a questionnaire survey method, and the questionnaire was designed by researchers considering relative literatures. Data were collected from 200 students, who had been dwelling 4 high school dormitories in Jeonju City. By analyzing those data, findings were as follows: 1) Users of students were satisfied the whole of their dormitory; facilities, spaces, and living. 2) They were highly concerned about a library and a personal unit space in their dormitory. 3) They needed their personal unit space to be designed bedroom+bathroom type with 2 persons' sharing and be equipped one story bed and desk furniture. Also, they needed improvement on heating & cooling, small space and indoor air quality of unit space. 4) The users' satisfaction on unit space were 2.88, and their satisfaction of the technical factor was 2.71 that was the lowest score in them. And The functional factor was highly effected their satisfaction. 5) The space utility and the space size of functional factor, the soundproof, the heating/ventilation and the indoor quality of technical factor, and the privacy of behavior factor were highly correlative to their satisfaction of unit space.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.54-61
• /
• 2012

The aim of this study is to understand the plan characteristics used in unit floor planning mainly with examples of mixed-use residential tall buildings. The study will extract plan characteristics mainly using the graph expressive technique with essential information of the zoning function of residential space, rather than merely analyzing the various construction floor plans by type. The research method involves studying a group of 50-story buildings (over 200 meters) which were built between 2002 and 2008. Among 6 high-rise residential buildings case, we extract the most preferred type from 34 types, And then we simply classify rooms in 3 zoning, the master, living and children's zones. Finally we analyze the correlation among 3 simple zone and then extract some model type. The results of this study revealed three main findings. First, using the 3 functional zones, the shape of the main building and the unit floor plan can be analyzed simply even when they appear to be complicated. Second, we can extract common features when we analyze the unit floor plan from the viewpoint of the penetrability among 3 zoning. Third, we can extract 2 types when we analyze the unit floor plan from the viewpoint of 3 connected functional zoning concepts.

• Plant Journal
• /
• v.13 no.3
• /
• pp.30-35
• /
• 2017

Module can be categorized as PAS(Pre-Assembled Steel structure), PAR(Pre-Assembled pipe Rack), PAU(Pre-Assembled Unit), VAU(Vendor Assembled Unit) and VPU(Vendor Package Unit). At the stage of design and fabrication of module, the condition of land and ocean transportation is considered and these conditions are reflected on the module division design. The control of the module's center of gravity is important to transport and install modules safely and the steel structure should have the strength enough to resist the sea acceleration force during the ocean transportation. The transportation condition and the installation method influence the size and weight of module. The size and weight of module are considered for the design of module division.