• Journal of the Korean Institute of Educational Facilities
• /
• v.8 no.2
• /
• pp.27-40
• /
• 2001

The opinion on merits and defects caused the unified-closed of a school facilities have collected by a people and government since the unified-closed system was enforced. There is a problem that the data occurring in the middle of the unified-closed is not analized. Therefore, in this study the target is elementary schools in kyung-gi province which did the unified-closed. First, this study is for analysing which condition influenced to make them. Second, it is for understanding the problems occurred in the process of the unified-closed and presenting the direction of improvement. Third, it is for setting up the planned guide by classification of school facility for the unified-closed which considers the previous problems sufficiently. The range of the study treats of general trend and analysis about the unified-closed of elementary school. The core subject is to analyse the standard and classification of the unified-closed of the object school by the policy of the unified-closed and to compare the carried process of the case school.

• Journal of the Korean Institute of Educational Facilities
• /
• v.19 no.3
• /
• pp.21-31
• /
• 2012

According to the decrease in birth rate and reduction of population in rural area, primary schools have brought about many problems for decrease of number of student, and environment of education have became deteriorated. Accordingly, primary schools be required improvement, and it should be altered placement of schools because it change number of student, distance and time of attending school, and formation of school zone are changed by alternating of human and physical environment. Merger and abolition of primary school is inevitable for change of placement standard to primary school and qualitative improvement of environment of education in rural area. This study suggests the effective space planning methods for unified school and appropriate utilization alternatives for closed school following after the merger and abolition of small rural schools. In doing so, it explores the present models of merger and abolition through analysis of all sort of actual condition and the possibilities for various utilizations of the abolished schools. It proposes a classroom-operation type fused the comprehensive class and departmental class system for merged primary schools in rural area. It also suggests the re-use methods of closed school facilities for students and community. Finally, it emphasizes that in order to success the policy of the merger and abolition of small schools, it be attributed to the social-cultural environment based on local residents and community and required provision of a variety of utilization plans reflecting local specifics and guarantee of local residents' participation and selection.

• Journal of the Korean Institute of Rural Architecture
• /
• v.25 no.3
• /
• pp.27-35
• /
• 2023

This study aims to provide implications for Korea's efficient application policies for closed schools by identifying the current status of how closed schools are revitalized in Japan and their supportive measures. In Japan, a total of 2,215 schools have closed from 1992 to 2001, and 8,580 schools from 2002 to 2020, with 10,709 closures occurring from 1992 to 2020. The average number is about 369 per year. In terms of the overall trend, the number of closed schools have been put into use and the numbers have increased from 70% in 2013 to 74% in 2020. To summarize the characteristics of the use, first, there is a complex phenomenon in which the use of closed schools are becoming more diverse. Second, closed schools are most often revitalized as educational facilities for residents, followed by social sports facilities, social education facilities and cultural facilities. Third, the use of closed schools in the industries are increasing as they are used as "corporal facilities and start-up support facilities". In order to promote the use of closed schools, the Ministry of Education, Culture, Sports, Science and Technology in Japan promoted the simplification and elasticity of property disposal procedures in 2008. Since 2010, the disclosure of information on closed facilities and matching service between providers and users have been unified through the "Let's Connect to the Future ~ Closed School for All" project. The Cabinet Office including the four offices, and five central governments are advocating the use of closed schools by promoting subsidy support projects.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.129-141
• /
• 2018

This paper proposes a unified framework that overcomes four motion constraints including joint limit, kinematic singularity, algorithmic singularity and obstacles. The proposed framework is based on our previous works which can insert or remove tasks continuously using activation parameters and be applied to avoid joint limit and singularity. Additionally, we develop a method for avoiding obstacles and combine it into the framework to consider four motion constraints simultaneously. The performance of the proposed framework was demonstrated by simulation tests with considering four motion constraints. Results of the simulations verified the framework's effectiveness near joint limit, kinematic singularity, algorithmic singularity and obstacles. We also analyzed sensitivity of our algorithm near singularity when using closed loop inverse kinematics depending on magnitude of gain matrix.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.473-481
• /
• 2012

For a mesa-isolated small geometry SOI MOSFET, the potentials in the silicon film, front, back, and side-wall oxide layers can be derived three-dimensionally. Using Taylor's series expansions of the trigonometric functions, the derived potentials are written in terms of the natural length that can be determined by using the derived formula. From the derived 3-D potentials, the minimum values of the front and the back surface potentials are derived and used to obtain the closed-form expressions for the front and back gate threshold voltages as functions of various device parameters and applied bias voltages. Obtained results can be found to explain the drain-induced threshold voltage roll-off and the narrow width effect of a fully depleted small geometry SOI MOSFET in a unified manner.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2011

A two-dimensional analytical model for deriving the threshold voltage of a short channel fully depleted (FD) cylindrical/surrounding gate MOSFET (CGT/SGT) is suggested. By taking into account the lateral variation of the surface potential, introducing the natural length expression, and using the Bessel functions of the first and the second kinds of order zero, we can derive potentials in the gate oxide layer and the silicon core fully two-dimensionally. Making use of these potentials, the minimum surface potential can be obtained to derive the threshold voltage as a closed-form expression in terms of various device parameters and applied voltages. Obtained results can be used to explain the drain-induced threshold voltage roll-off of a CGT/SGT in a unified manner.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.51-58
• /
• 2001

This paper proposes a new strategy to estimate the rotor flux of an induction machine for the direct field oriented control. Electrical model of the induction machine presents the basic idea based on observer structure, which is composed of voltage model and current model. But the former has the defects in low speed range, the latter has the defects of sensitivity to machine parameters. In spite of these shortcomings, the closed loop flux observer based on two models has been prevalent estimation method for the direct field oriented control. In this paper, generalized analysis method named "observer characteristic function method"is proposed to analyze the kinds of the linear flux observers in unified form. With the observer characteristic function, the estimated rotor flux error involved in the classical methods can be easily clarified. Moreover, the novel rotor flux observer based on this analysis is also presented and the effectiveness of the observer has been verified by the simulation and experimental results.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.997-1016
• /
• 2015

The contribution of tensioned concrete between cracks (tension-stiffening) cannot be ignored when analysing deformation of reinforced concrete elements. The tension-stiffening effect is crucial when it comes to adequately estimating the load-deformation response of steel reinforced concrete and the more recently appeared fibre reinforced polymer (FRP) reinforced concrete. This paper presents a unified methodology for numerical modelling of the tension-stiffening effect in steel as well as FRP reinforced flexural members using the concept of equivalent deformation modulus and the smeared crack approach to obtain a modified stress-strain relation of the reinforcement. A closed-form solution for the equivalent secant modulus of deformation of the tensioned reinforcement is proposed for rectangular sections taking the Eurocode 2 curvature prediction technique as the reference. Using equations based on general principles of structural mechanics, the main influencing parameters are obtained. It is found that the ratio between the equivalent stiffness and the initial stiffness basically depends on the product of the modular ratio and reinforcement ratio ($n{\rho}$), the effective-to-total depth ratio (d/h), and the level of loading. The proposed methodology is adequate for numerical modelling of tension-stiffening for different FRP and steel reinforcement, under both service and ultimate conditions. Comparison of the predicted and experimental data obtained by the authors indicates that the proposed methodology is capable to adequately model the tension-stiffening effect in beams reinforced with FRP or steel bars within wide range of loading.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.140-147
• /
• 2011

The injection nozzle of an electro-hydraulic injector for the common rail Diesel fuel injection system is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the slenoid actuator was considered as a prime movers in high pressure Diesel injector. Namely a solenoid-driven Diesel injector with different driving current types, as a general method driven by solenoid coil energy, has been applied with a purpose to develop the analysis model of the solenoid actuator to predict the dynamics characteristics of the hydraulic component (injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the solenoid-driven injector, the circuit model has been developed as a unified approach to mechanical modeling in this study. As this analytic results, we know the suction force and first order time lag for driving force can be endowed in solenoid-driven injector in controlling the injection rate. Also it can predict that the input current wave exerted on solenoid coil is the dominant factor which affects on the initial needle behavior of solenoid-driven injector than the hydraulic force generated by the constant injection pressure.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.63-72
• /
• 2016

Closed-circuit television(CCTV) is a facility that forms the backbone of the ubiquitous services provided by the Integrated Management Center of the Ministry of Land, Infrastructure and Transport and the Integrated Control Center of the Ministry of the Interior. However, it is installed and managed according to different laws, as it is operated and managed by each department. Moreover, because there are no regulatory grounds for unified management of CCTV, each municipality responsible for the actual management manages it based on the individual standards of each department. Thus, the purpose of this study is to develop a standardized management form to establish an integrated management plan. The author inspected the existing situation by examining the legal system and public data and through hands-on worker interviews, and discovered the managed element by reviewing the specifications of the bidding system. The management form for integrated management comprises the above requirements along with the management histories and linkage of intelligent facilities. A uniform management form for integrated management containing specifications of the CCTVs installed by various departments is created, and is easily searched for facilities to check requirements for joint use. The result of this study can contribute to building the database of facility management system for integrated management of facilities at the integrated management center as well as for a detailed simulation of the selection of location of CCTV depending on the CCTV's specifications.