• Composites Research
• /
• 제36권1호
• /
• pp.59-67
• /
• 2023

항공우주산업에서 경량화를 위해 사용되는 CFRP 복합재료로 구성된 차체의 충격에 따른 파손은 탑승자의 안전과 직결된다. 따라서 충돌 상황에서 육안으로 확인하기 힘든 재료의 손상거동을 파악하는 것이 중요하며, 이를 구현할 수 있는 유한요소모델을 통한 연구가 필요하다. 본 연구에서는 일방향 적층 복합재료의 충돌 해석에 대해 파손 거동 예측에 적합한 유한요소모델을 구축하였다. 인공신경망 모델을 통해 LS-DYNA에서 제공하는 MAT_54 Enhanced Composite Damage 재료 모델의 교정 파라미터를 역추정하여 획득하였다. 획득한 파라미터에 대한 인공신경망 모델의 결과를 실험결과와 비교하여 신뢰성을 검증하였다. 그 결과, 교정 파라미터의 최적화를 통해 실험에 대한 정확도를 향상시킨 유한요소모델을 구축할 수 있음을 확인하였다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권11호
• /
• pp.925-932
• /
• 2017

본 연구에서는 복합재료들 중 단방향성 탄소섬유강화플라스틱(UD CFRP)에서의 적층각도에 따른 비틀림을 받는 판의 해석을 수행하였다. UD CFRP의 경우에는 적층각도에 따른 물성치가 달라진다. 그리고 연구 모델들에서 탄소 섬유의 적층각도는 15°, 30°, 45°, 60°, 75°, 90° 로 지정하였다. 중앙부에는 리벳이나 볼트가 사용될 것으로 가정하여 노치홀을 적용하였다. ISO 15310에서의 실험 방식을 적용하여 해석 방법을 사용했다. 하부에서 2개의 지그를 고정하고 상부에서 2개의 지그를 하강한다. 본 연구에서의 해석 결과값을 보았을 때, 적층각도가 45°일 경우가 파단 부위에 나타나는 전단응력이 254.74MPa로 가장 작은 값으로 나타남을 보였다. 따라서 비틀림이 작용할 때, 45°의 적층각도의 경우가 다른 적층각도에 비하여 더 높은 구조안전성과 내구성을 가졌음을 알 수 있었다. 이러한 결과는 CFRP 판에 비틀림이 작용할 때 그 내구성에 기여할 수 있는 기반 데이터로 적용될 수 있다고 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.73-80
• /
• 2008

본 논문에서는 RC 구조물의 보수 보강 공사에 적용되는 FRP 복합체의 역학적 특성치를 평가하기 위하여 각국에서 제안된 시험규격을 비교 분석하고, 시험편 형상 및 시험방법의 차이가 재료성능에 미치는 영향에 대한 실험적 검증을 통하여 표준화된 시험방법 및 평가기준을 도출하고자 하였다. 주 실험변수는 FRP 복합체의 종류, 시험편의 폭, 보강매수 및 가력속도로 설정하였다. 본 시험결과에 의하면, 최대 인장강도와 최소변동계수를 나타내는 인장 시험편의 폭은 FRP의 종류/직조방법에 따라 다르게 나타났으며, 특히 적층형으로 시공되는 FRP 복합체는 보강매수에 따른 인장강도의 저하현상이 관측되므로, 이를 적절히 고려할 수 있는 평가기준의 설정이 필요할 것으로 판단된다.

• 한국융합학회논문지
• /
• 제8권7호
• /
• pp.219-224
• /
• 2017

본 논문은 탄소섬유로 구성된 아치형태의 시험편에 인장각도가 작용할 때 내부의 섬유구조에서 발생되는 등가응력과 변형량에 관한 것이다. CFRP는 무수히 많은 각 섬유가 하나의 축으로 작용하며 이를 통해 금속과 비교할 때 높은 비강도와 비강성을 가질 수 있다. 본 연구에서 사전연구에 의해 최적 적층각도는 $60^{\circ}$로 구성된 아치형 구조에서 반경에 따른 응력분포를 결과를 검토하며 같은 적층각도에서 그 반경이 증가할수록 내구성이 낮아짐을 알 수 있다. 이를 통해 본 연구 결과를 적층 각도에 따른 아치형 구조의 설계에 적용함으로써, 파손방지와 내구성 향상을 위한 안전설계에 기여할 수 있으며, 패드 형상의 디자인적인 요소를 융합기술에 접목하여 그 미적인 감각을 나타낼 수 있다.

• Advances in aircraft and spacecraft science
• /
• 제5권1호
• /
• pp.129-139
• /
• 2018

The composite materials are widely used in aircraft structures. Their relative rigidity/weight gives them an important advantage over the metal structures. The objective of this work is to analyze by the finite element method the mechanical behavior of composite plate type notched with various forms under tensile load. Two basic parameters were taken into consideration. The first, the form of the notch in order to see its effect on the stress and the failure load. The second, we studied the influence of the locale orientation of fiber around the plate's notch. These parameters are studied in order to see their effects on the distribution stress and failure load of the plate. The calculation of the failure load is determined numerically with the numerical code ABAQUS using the XFEM (extended Finite Element Modeling) based on the fracture mechanics. The result shows clearly that it is important to optimize the effect of fiber orientation around the notch.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.122-128
• /
• 2001

The objective of the present study was to investigate the characteristics of the friction and wear according to the amount of ion-irradiation for the carbon fiber reinforced plastic(CFRP). Unidirectional carbon fiber reinforced composites were fabricated with epoxy resin as a matrix and carbon fiber as a reinforcement, and its surface was modified by the ion-assisted reaction. When the amount of ion-irradiation was $1{\times}10^{16}$ ions/$cm^2$, the friction coefficients of composites were about 0.1 and the wear mode was stable, whereas, the friction coefficient of non-treatment composites were about 0.16 and the wear mode was very unstable. But if the amount of ion-irradiation was $5{\times}10^{16}$ ions/$cm^2$, the friction coefficients were higher rather than that of $1{\times}10^{16}$ ions/$cm^2$. Consequently, the amount of ion-irradiation was not in proportion to the friction coefficients, and it was conformed that the optimal conditions would exist between broth of them.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.401-406
• /
• 2001

When propagating the thickness direction of composite laminates ultrasound waves interacts strongly with the orientation and sequence of the plies in a layup. Also the layup orientation greatly influences its properties in a composite laminate. If one ply of the layup orientation is misaligned, it could result in the part being rejected and discarded. Now, most researchers cut a small coupon from the waste edge and use a microscope to optically verify the ply sequences on important parts. Those may add a substantial cost to the product since the test is both labor hard and performed after the part is cured. A nondestructive technique would be very beneficial, which could be used to test the part after curing and require less time than the optical test. Therefore we have developed, reduced, and implemented a novel ply-by-ply vector decomposition model for composite lam mates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. It is found that a high probability shows between the model and tests developed in characterizing cured layups of the laminates.

• Tribology and Lubricants
• /
• 제18권1호
• /
• pp.61-67
• /
• 2002

The objective of the present study was to investigate the characteristics of the friction and wear according to the amount of ion-irradiation for the carbon fiber reinforced plastic (CFRP). Unidirectional carbon fiber reinforced composites were fabricated with epoxy resin as a matrix and carbon fiber as a reinforcement, and its surface was modified by the ion-assisted reaction. When the amount of ion-irradiation was $1{\times}10^{16}$ $ions/cm^{2}$. the friction coefficients of composites were about 0.1 and the wear mode was stable. whereas, the friction coefficient of non-treatment composites were about 0.16 and the wear mode was very unstable. But if the amount of ion-irradiation was $5{\times}10^{16}$ $ions/cm^{2}$, the friction coefficients were higher rather than that of $1{\times}10^{16}$ $ions/cm^{2}$ Consequently. the amount of ion-irradiation was not in proportion to the friction coefficients, and it was conformed that the optimal conditions would exist between both of them.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.821-828
• /
• 2016

Recently, the use of composite materials in the defense system has grown dramatically. The strength/weight and stiffness/weight ratios of composite structures are normally higher than of metals. Woven composites, especially, are increasingly considered for a variety of applications, because they offer good workability for complicated structures. HPW193/RS1222 is one of the most famous woven composites and has been used in many types of Korean military equipment, such as antenna pedestals and radar systems. In this study, we predicted the elastic modulus of HPW193/RS1222 using the principles of unidirectional composite stiffness predictions, such as ROM (Rule of Mixture), HSR (Hart Smith 10% Rule), CLA (Classical Laminate Analysis) and LAP (Laminate Analysis Program). We compared the dynamic characteristics with the experimental predictions and finite-element analysis (FEA). From our results we concluded that transversely isotropic materials are similar to isotropic materials when the shape of the composite structure is complicated.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.811-830
• /
• 2014

A numerical study has been carried out to simulate an innovative monitoring procedure to detect and localize damage in reinforced concrete beams retrofitted with carbon fiber reinforced polymer (CFRP) unidirectional laminates. The main novelty of the present simulation is its ability to conduct the electromechanical admittance monitoring technique by considerably compressing the amount of data required for damage detection and localization. A FEM simulation of electromechanical admittance-based sensing technique was employed by applying lead zirconate titanate (PZT) transducers to acquire impedance spectrum signatures. Response surface methodology (RSM) is finally adopted as a tool for solving inverse problems to estimate the location and size of damaged areas from the relationship between damage and electromechanical admittance changes computed at PZT transducer surfaces. This statistical metamodel technique allows polynomial models to be produced without requiring complicated modeling or numerous data sets after the generation of damage, leading to considerably lower cost of creating diagnostic database. Finally, a numerical example is carried out regarding a steel-reinforced concrete (RC) beam model monotonically loaded up to its failure which is also retrofitted by a CFRP laminate to verify the validity of the present metamodeling monitoring technique. The load-carrying capacity of concrete is predicted in the present paper by utilizing an Ottosen-type failure surface in order to better take into account the passive confinement behavior of retrofitted concrete material under the application of FRP laminate.