• East Asian mathematical journal
• /
• 제36권5호
• /
• pp.547-554
• /
• 2020

Synchronization of unidirectional identical FitzHugh-Nagumo systems coupled in a ring structure under ionic and external electrical stimulations is investigated. In this network, each neuron is only connected and transmit signals to its next neuron via synaptic strength called gapjunctions. Adaptive control theory and Lyapunov stability theory are used to propose a unique control scheme with necessary and sufficient conditions which guarantee the synchronization of the neuronal network. Finally, the effectiveness of the proposed scheme is shown through numerical simulations.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.46-49
• /
• 2001

In this paper. tile validity of work factor approach was investigated to determine compressive fracture toughness of unidirectional graphite/epoxy composites under hydrostatic pressure environment. The elastic work factor was determined under various pressures as a function of delamination length. It was found that elastic work factor was not affected by hydrostatic pressure.

• 대한산업공학회지
• /
• 제19권2호
• /
• pp.43-51
• /
• 1993

This paper describes the flow path design of unidirectional automated guided vehicle systems. The objective is to find the flow path which will minimize total travel time of unloaded as well as loaded vehicles. The allocation of unloaded vehicles is determined by applying the transportation simplex method. The problem is solved using a branch-and-bound technique. A simple illustrative example is discussed to demonstrate the procedure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1632-1636
• /
• 2005

This paper presents synchronization of two identical Modified Chua's circuits using two strategies of error feedback coupling. In the first method the synchronization is achieved by linear unidirectional and in the second one by linear bidirectional error feedback coupling. Both proposed methods can make the states of the Modified Chua's circuits globally asymptotically synchronized. Numerical results are provided to show the effectiveness of the proposed approaches and to compare them together based on different criteria.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.276-281
• /
• 1989

Comparison 3-port servo system with 4-port is made to obtain optimal design for heavy and unidirectional hydraulic system, It is concluded that 3-port servo system it more adequate than 4-port for the heavy load system which is usually operated at lower frequencies. High performance electro-hydraulic position controller is designed using 3-port servo valve. It includes dynamic pressure feedback as a inner loop and position feedback as a outer loop.

• The Journal of the Acoustical Society of Korea
• /
• 제24권2E호
• /
• pp.54-60
• /
• 2005

A new multichannel blind deconvolution algorithm is proposed for speech mixtures. It employs unidirectional filters and normalization of gradient terms in the frequency domain. The proposed algorithm is shown to be approximately nonholonomic. Thus it provides improved convergence and separation performances without whitening effect for nonstationary sources such as speech and audio signals. Simulations using real world recordings confirm superior performances over existing algorithms and its usefulness for real applications.

• Management Science and Financial Engineering
• /
• 제15권1호
• /
• pp.71-79
• /
• 2009

This paper considers the two kinds of integer multicommodity flow problems, a feasibility problem and a maximization problem, on two types of directed cycles, a unidirectional and a bidirectional cycle. Both multicommodity flow problems on an undirected cycle have been dealt with by many researchers and it is known that each problems can be solved by a polynomial time algorithm. However, we don't find any result on the directed cycles. Here we show that we can also solve both problems for a unidirectional and a bidirectional cycle in polynomial time.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.705-713
• /
• 1997

The residual thermal stresses at the interface corner between the elastic fiber and the viscoelastic matrix of a two-dimensional unidirectional laminate due to cooling from cure temperature down to room temperature were studied. The matrix material was assumed to be thermorheologically simple. The time-domain boundary element method was employed to investigate the nature of stresses on the interface. Numerical results show that very large stress gradients are present at the interface corner and this stress singularity might lead to local yielding or fiber-matrix debonding.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.301-301
• /
• 2003

In current study, Nanocomposites are reinforced with carbon nanofiber, carbon nanotube and SiC, etc. Since the nano reinforcements have the excellent mechanical, thermal and electrical properties compared with that of existing composites, it has lately attracted considerable attention in the various areas. Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties. Until now, strengthening of the copper alloy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the alloy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conducting material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the cooer matrix composites of high strength and electric conductivity. In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process and align mechanism as well as optimized drawing process parameter are verified via numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of 10∼20$\mu\textrm{m}$ in length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper. it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber Optimal parameter for drawing process was obtained by analytical and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc. The lower drawing angles and lower reduction areas provides the less rupture of co tube is noticed during the drawing process and the better alignment of carbon nanofiber is obtained.

• Composites Research
• /
• 제18권1호
• /
• pp.38-44
• /
• 2005

본 연구에서는 단일방향 탄소섬유강화복합재료 판에서 $S_o$ 대칭모드의 군속도 분선곡선을 전파 방향을 변화시키먼서 계산하였다. 그리고 속노 분산 곡선에서 첫 번째 단절주파수 이하인 0.2 MHz-mm에 해당하는 $S_o$ 대칭모드 군속도를 가지고서 위상속도 곡선을 얻고 slowness 곡선을 도입하여 군속도 곡선으로 교정하였다. 단일방향 섬유강화복합재료 판에서 $S_o$ 대칭모드의 속도를 전파 방향을 변화시키면서 측정하였고 교정된 군속도 곡선과 비교하였다. 측정된 속도는 섬유 방향 근처의 cusp 영역을 제외하고는 교정된 군속도 곡선과 잘 일치하였다. 이것은 단일방향 탄소섬유강화복합재료 판에서 속도가 빠른 방향으로 에너지를 더 잘 전파하기 때문에 전파 방향이 주축방향과 일치하지 않을 때 군속도 방향은 섬유 방향 쪽으로 기울어지는 결과로 나타난 것이다.